Numerical modeling of the hydraulic blade pitch actuator in a spar‐type floating wind turbine considering fault conditions and their effects on global dynamic responses

This paper deals with numerical modeling of the hydraulic blade pitch actuator and its effect on the dynamic responses of a floating spar‐type wind turbine under valve fault conditions. A spar‐type floating wind turbine concept is modeled and simulated using an aero‐hydro‐servo‐elastic simulation tool (Simo‐Riflex [SR]). Because the blade pitch system has the highest failure rate, a numerical model of the hydraulic blade pitch actuator with/without valve faults is developed and linked to SR to study the effects of faults on global responses of the spar‐type floating wind turbine for different faults, fault magnitudes, and environmental conditions. The consequence of valve faults in the pitch actuator is that the blade cannot be pitched to the desired angle, so there may be a delay in the response due to excessive friction and the wrong voltage, or slit lock may cause runaway blade pitch. A short circuit may cause the blade to get stuck at a particular pitch angle. These faults contribute to rotor imbalance, which result in different effects on the turbine structure and the platform motions. The proposed method for combining global and hydraulic actuator models is demonstrated in case studies with stochastic wind and wave conditions and different types of valve faults.     

巨型工程机械子午线轮胎高强度、低生热胎面基部胶配方开发

通过对国外知名品牌37.00R57和40.00R57规格巨型工程机械子午线轮胎胎面基部胶组成分析和物理性能测试,对我公司巨型工程机械子午线轮胎胎面基部胶配方进行优化设计。新开发配方半成品和成品胶料动态损耗因子分别降低37.9%和26.6%,胶料物理性能达到竞品水平,成品轮胎TKPH提升13.6%。     

Passive target detection and tracking from electromagnetic field measurements

This paper presents a novel approach to the localization of moving targets in a complex environment based on the measurement of the perturbations induced by the target presence on an independently‐generated time‐varying electromagnetic field. Field perturbations are measured via a set of sensors deployed over the domain of interest and used to detect and track a possible target by resorting to a particle Bernoulli filter (PBF). To comply with real‐time operation, the PBF works along with an artificial neural network (ANN) model of the environment trained offline via finite elements (FEs). The performance of the proposed algorithm is assessed via simulation experiments.     

缓冷出口温度对连续退火SPCC冷轧薄板屈服强度的影响

研究了缓冷出口温度对连续退火SPCC冷轧薄板组织和屈服强度的影响。结果表明:连续退火SPCC冷轧薄板的组织由等轴的铁素体晶粒和晶界处的块状渗碳体及晶粒内的颗粒状渗碳体组成。随着缓冷出口温度从680 ℃提高至700 ℃,平均晶粒尺寸从10.1 μm增加至12.5 μm;此外,提高缓冷出口温度还能够抑制晶界处块状渗碳体的形成,促进晶粒内细小渗碳体更加细小弥散的析出。当缓冷出口温度从680 ℃提高至700 ℃时,冷轧薄板的屈服强度约降低了28 MPa。     

Analysis of Fouling in Six-Start Spirally Corrugated Tubes

Abstract

Fouling on heat exchanger surfaces can weaken the heat-transfer capability, increase the energy consumption, and even cause the failure of the whole system. In coaxial heat exchangers, spirally corrugated tubes perform better than smooth ones concerning heat transfer and antifouling. In this article, a parametric study on the antifouling performance of a six-start spirally corrugated tube is carried out with a solid–liquid two-phase model. First, comparisons between a smooth tube and a specific sample six-start spirally corrugated tube on the solid particle volume fraction distributions are carried out. Then, the effects of solid particle diameter, the main geometric parameters, including pitch and the corrugation depth, are investigated. Analyzing the solid particle volume fraction with different geometries, solid particle diameters and Reynolds number, the roles played by the centrifugal force, drag force, and gravity of solid particles on fouling performance in six-start spirally corrugated tubes are obtained. In addition, the corrugation depth affects the volume fraction range more while the pitch affects more on the steady range of particle volume fraction. This work is of significance for further design of spirally corrugated tubes and analysis of fouling problems in heat exchangers.     

Study on wax precipitation characteristics of wax deposit in pipes

Wax deposit properties are a significant concern in pipeline pigging during waxy crude oil transportation. In the present work, the impacts of flow conditions and oil properties on the wax precipitation characteristics of wax deposits are investigated. A flow loop apparatus was developed to conduct wax deposition experiments using four crude oils collected from different field pipes. The differential scanning calorimetry (DSC) technique was employed to observe the wax precipitation characteristics of crude oil and wax deposit. The results show that the wax content and the wax appearance temperature (WAT) of the deposits increase with shear stress and radial temperature gradient, and decrease with radial wax molecule concentration gradient near the pipe wall. The DSC tests on the wax deposits revealed that the deposit wax content is strongly correlated to the oil wax content. Furthermore, an empirical correlation was developed to predict the wax content and the WAT of the wax deposit. Verification of the empirical correlation using the different oils indicated that the average relative error of the wax content prediction and average absolute error of WAT prediction were 13.2% and 3.6°C, respectively.     

Efficient removal of Congo red from pH-unregulated aqueous solutions by lignosulfonate-based polycatecholamine

Lignosulfonate-based polycatecholamine (PCEA-LS) was synthesized by a two-stage approach involving Mannich and catechol–amine reactions, and it was directly used to adsorb Congo red (CR) from the pH-unadjusted aqueous solution. PCEA-LS was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Various factors affecting on removal of CR by PCEA-LS were investigated in depth, including contact time, adsorbent dosage, and initial concentration of CR and adsorption temperature. The adsorption kinetics, isotherm, and thermodynamics of PCEA-LS for CR were explored in detail, and then its adsorption mechanism was systematically elucidated. Results indicated that the removal process of CR followed the pseudo-second-order kinetic model, and the isotherm data fitted the Langmuir model well. The maximum adsorption capacity reached 972.6 mg g⁻¹ at 30°C in the pH-unadjusted (pH = 6.25) solution possibly due to the hydrogen bond, π–π stacking, and electrostatic interaction between PCEA-LS and CR. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48640.     

一种钛白粉转窑煅烧尾气余热利用新装置

钛白粉煅烧转窑尾气的高湿、高硫、高酸露点的特性使得转窑尾气余热利用过程中换热器寿命不理想。在总结已有尾气余热利用方式存在问题的基础上,提出了一种长寿命、易维护的套管式热管余热利用装置,该装置由彼此分离的换热套管通过弯头、法兰连接成为整体,尾气垂直横掠双层套管段,与高硫、高湿的尾气通过相变介质的相变完成热量由尾气向取热介质的转移,产生钛白粉生产工艺所急需的蒸汽,双层管的相变换热套管对比单层管的重力热管换热器寿命明显延长;连接换热套管的单层管弯头不与高湿、高硫尾气换热,大大减轻了尾气对单层管的腐蚀。换热器应用在3.6 m×58 m的钛白粉煅烧窑上,每年可以产生0.9 MPa的水蒸气1.12万t,为企业带来可观的经济效益。