由于接线错误而导致对变压器铁芯接地电流的误判及其分析

介绍变压器铁芯和夹件接地回路及变压器铁心多点接地检测装置。对由于铁芯与夹件接地引出回路接线错误由此因外界电磁场在寄生回路上产生的感应电流进行了分析,提出了工程施工中应注意闭合回路问题。     

Ultrathin MoSSe alloy nanosheets anchored on carbon nanotubes as advanced catalysts for hydrogen evolution

The activity of transition metal dichalcogenides (TMD) toward hydrogen evolution reaction (HER) derives from the active sites at the edges, but the basal surface still remain catalytic insert. Herein, ultrathin MoSSe alloy nanosheets array on multiwalled carbon nanotubes (MWCNTs) to form a core shell structure via a simple solvothermal process. These three-dimensional (3D) MoSSe hybrids show a high activity in hydrogen evolution reaction (HER) with a small Tafel slope of 38 mV dec⁻¹ and a low overpotential of 102 mV at 10 mA cm⁻². In addition, their HER activity remains remarkably stable without significant decay after 100 h polarization. Such superior catalytic HER activity springs from the 3D hierarchical heterostructure, which is abundant of catalytic edge sites, and the alloy effect between S and Se, which will create huge defects and strain to form vacancy sites on the basal plane. This strategy may open a new avenue toward the development of nonprecious high-performance HER catalysts.     

Agglomeration Mechanism of Nanoparticles by Adding Coarse Fluid Catalytic Cracking Particles

The agglomeration mechanism of SiO₂, TiO₂, and ZnO nanoparticles by adding coarse fluid catalytic cracking (FCC) particles is studied. The core‐shell structure of agglomerates is revealed on the basis of experimental analyses. Nanoparticles can be fluidized by forming agglomerates of the core‐shell structure with coarse FCC particles. The porosity of core‐shell structure agglomerates and the average roundness value were found to be distinctly lower than those of pure nanoparticle agglomerates. In addition, the cohesion of the core‐shell structure agglomerates is far less than that of the agglomerates formed by pure nanoparticles. Due to the smaller porosity, irregular shape, and relatively low cohesion, the fluidization behavior of core‐shell structure agglomerates is better than that of pure nanoparticle agglomerates.     

优化和控制大型变压器铁心夹紧力降低本体噪声

讨论了优化和控制大型变压器铁心夹紧力及降低本体噪声的要求。     

Core–shell structured Cu@Pt nanoparticles as effective electrocatalyst for ethanol oxidation in alkaline medium

Core–shell nanoparticles of Cu@Pt/C electrocatalysts were synthesized using various Pt:Cu atomic ratios with NaBH₄ as a reducing agent. The crystal structure and surface morphology were studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The incorporation of copper in Cu@Pt/C electrocatalysts was found to shift all Pt diffraction planes in the negative direction with expanding the crystal lattice dimensions. The electrocatalytic activity of various Cu@Pt/C electrocatalysts was investigated using cyclic voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Cu@Pt/C electrocatalysts containing Pt:Cu atomic ratios of 1:0.5 and 1:2 showed an enhanced electrochemical performance for ethanol oxidation when related to Pt/C.     

Microwave Absorption of Crystalline Fe/MnO@C Nanocapsules Embedded in Amorphous Carbon

Crystalline Fe/MnO@C core–shell nanocapsules inlaid in porous amorphous carbon matrix(FMCA)was synthesized successfully with a novel confinement strategy.The heterogeneous Fe/MnO nanocrystals are with approximate single-domain size which gives rise to natural resonance in 2–18 GHz.The addition of MnO2 confines degree of graphitization catalyzed by iron and contributes to the formation of amorphous carbon.The heterogeneous materials composed of crystalline–amorphous structures disperse evenly and its density is significantly reduced on account of porous properties.Meanwhile,adjustable dielectric loss is achieved by interrupting Fe core aggregation and stacking graphene conductive network.The dielectric loss synergistically with magnetic loss endows the FMCA enhanced absorption.The optimal reflection loss(RL)is up to−45 dB,and the effective bandwidth(RL<−10 dB)is 5.0 GHz with 2.0 mm thickness.The proposed confinement strategy not only lays the foundation for designing high-performance microwave absorber,but also offers a general duty synthesis method for heterogeneous crystalline–amorphous composites with tunable composition in other fields.     

Reproducibility of body temperature response to standardized test conditions when assessing clothing

Abstract

The traditional use of core temperature to assess the thermal effects of clothing has recently been questioned. The purpose of this study was to assess the reproducibility of body temperature in five subjects (mean age, 226 ± 1-5 yrs) wearing either athletic clothing or a chemical protective overgarment while exercising at 20°C and at 40°C. The exercise was preceded by a 1 h adaptation period in a controlled environmental chamber. Results indicated that mean group change in rectal temperature (δT_r ) appeared to be reproducible for both garment ensembles at 20°C but not at 40°C. For mean change in oesophageal temperature ( δT_oes ) at 20°C, reproducibility was obtained for the overgarment but not for the athletic garment; at 40°C, mean δT_oes appeared to be reproducible with both garments. However, when individual responses were examined, there was little reproducibility for either δT_r or δT_oes . In addition, these measurements failed to show differences in the types of clothing worn. It was concluded that the use of core temperature to assess heat stress imposed by wearing clothing during exercise may lead to erroneous conclusions.     

Team knowledge with motivation in a successful MMORPG game team: A case study

We studied the content of the team mental model with a case study about a successful online game team. This team was formed by high-ranking managers in a large raid guild to conduct a raid in War of Worldcraft. They were interviewed with a set of 5-W questions developed according to the conceptualizations of team mental model (Levine & Moreland, 1991). Toward the interview protocol, a content analysis was conducted with two-cycle coding method from exploratory to explanatory and a hierarchical framework from code, category, theme, to theory were generated to describe the team mental model. In the first cycle, 17 codes were extracted from participants' own wording for concepts that were shared by whom controlled various gaming characters. These codes are knowledge convergence about the problem at-hand, actors, events, affects and outcomes – what the core gamers have experienced through the collaborative gaming process. In the second cycle, coding was guided by learning theories. Six categories, mingled from 17 codes, showed collective knowledge of co-work process, leaders' works, work under supervision, seeking joint fun, relationship oriented, and balance between extrinsic-intrinsic motivations. From 6 categories, two themes were synthesized: the team (1) performed “joint hard work” for (2) seeking “joint hard fun.” The first theme comprised declarative and procedural knowledge representations and we consider it to be the commonality between this game team and ordinary work/learning teams. The second theme was composed of affective and cognitive evaluation components about intrinsic motivation which is in accordance with Self-determination theory (SDT, Deci & Ryan, 2000). In general, “Jointly hard work for hard fun” is the gist content of the team mental model. We found ample evidences that members explicitly recall shared motivational beliefs of team mates and emotional–motivational events in gaming. Based on the results of this study, several implications have been addressed for teachers to enhance students' intrinsic motivation in conducting quality Computer-Supported Collaborative Learning. Future studies are needed to further explore the relationship between the quality of team mental models and team-level performance.     

Numerical Simulation of Oil‐Water Core Annular Flow in a U‐Bend Based on the Eulerian Model

The oil‐water core annular flow through a U‐bend is simulated by computational fluid dynamics based on the Eulerian model. More flow parameters and the effect of annulus thickness on core annular flow are discussed. Conformity between the simulated and experimental data is observed. The development of oil‐water core annular flow in the U‐bend is analyzed, and the distributions of pressure and velocity are discussed. Results of the Eulerian model and volume‐of‐fluid (VOF) model are compared and the influence of oil properties on total pressure gradient is investigated. The suitable range of annulus thickness is identified. The results provide suitable operation conditions for designing the U‐bend pipefitting.     

Directed electrochemical synthesis of ZnO/PDMcT core/shell nanorod arrays with enhanced photoelectrochemical properties

In this paper, we demonstrate a simple two-step electrochemical deposition strategy for synthesizing ZnO/Poly(2,5-dimercapto-1,3,4-thiadiazole) (PDMcT) core/shell nanorod arrays. The as-synthesized ZnO/PDMcT samples are characterized by Fourier-transform infrared (FTIR), Raman spectroscopy, power X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The ZnO/PDMcT nanorod arrays are found to exhibit significantly enhanced photocurrent density in photoelectrochemical cell applications as compared to the prinstine ZnO nanorod arrays.