热冲压工艺参数对22MnB5马氏体钢汽车B柱性能影响的有限元模拟

通过有限元仿真软件Autoform分析了热冲压过程中工艺参数的变化对22MnB5马氏体钢B柱起皱、回弹、减薄、马氏体量以及强度的影响。结果表明:22MnB5马氏体钢B柱热冲压最优化工艺参数为加热温度930 ℃,冷却速率80 ℃/s。该工艺参数下,热冲压过程各处均完成马氏体转变,硬度分布均匀,材料减薄率较低,热冲压成形效果好,尺寸精度高,冲压件强度均大于1400 MPa。     

毫米波波束管理的设计与研究

毫米波是第五代移动通信系统的重要通信技术,因其频谱特性可以利用大带宽承载大量信息,有效提升系统的吞吐量。高频段毫米波传输具有高损耗性,且受环境影响较大,为了支持非视距和移动性,必须支持准确且实时的波束跟踪以确保信号传输质量。波束管理的目的是使得基站与终端之间发送与接收波束对准以提高链路的性能。文中根据3GPP协议规范设计了波束管理方案,包括以下几方面的内容:波束扫描、波束测量、波束上报、波束指示、波束失败恢复。     

[学科发展]5D打印——生物功能组织的制造

生物制造是制造技术与生命科学技术交叉融合产生的新兴学科方向，这一学科方向的发展将为巨大的人体组织与器官市场提供新技术，同时也给制造技术变革带来新机遇。面向生物制造未来发展，提出5D打印制造概念，论述了5D打印的内涵，分析了其关键技术。结合生物制造技术的现有进展，介绍了研究团队在心肌组织支架的制造、类脑神经组织制造、爬行生命机械混合机器人方面取得的初步研究进展，为生物制造技术拓展新方向提供新思路。     

多级孔HZSM-5分子筛催化快速热解生物质制芳烃

采用酸和/或碱处理法制备了一系列多级孔HZSM-5分子筛，采用XRD、N₂吸附、XRF、TEM、²⁷Al MAS NMR和NH₃-TPD等表征手段对其孔道结构和酸性进行表征。表征结果表明，采用碱处理方法，可获得孔径集中于3~6 nm的介孔结构，通过改变酸、碱处理次序，可调变酸中心数量和强酸/总酸中心比例。在Py-GC/MS装置上，以纤维素和水稻秸秆为原料，研究多级孔分子筛结构对催化快速热解（CFP）制芳烃反应的影响。反应评价结果表明，同商品级HZSM-5相比，采用先碱后酸处理获得的多级孔HZSM-5分子筛（HZ-OH/H），可将纤维素CFP芳烃碳产率由32.3%提高至43.6%，可将水稻秸秆CFP芳烃碳产率由23.0%提高至30.8%。多级孔HZ-OH/H分子筛的孔道结构和酸中心分布特征，对开发应用于生物质制芳烃的高效工业催化剂具有借鉴意义。     

Targeting Casein Kinase 1 (CK1) in Hematological Cancers

The casein kinase 1 enzymes (CK1) form a family of serine/threonine kinases with seven CK1 isoforms identified in humans. The most important substrates of CK1 kinases are proteins that act in the regulatory nodes essential for tumorigenesis of hematological malignancies. Among those, the most important are the functions of CK1s in the regulation of Wnt pathways, cell proliferation, apoptosis and autophagy. In this review we summarize the recent developments in the understanding of biology and therapeutic potential of the inhibition of CK1 isoforms in the pathogenesis of chronic lymphocytic leukemia (CLL), other non-Hodgkin lymphomas (NHL), myelodysplastic syndrome (MDS), acute myeloid leukemia (AML) and multiple myeloma (MM). CK1δ/ε inhibitors block CLL development in preclinical models via inhibition of WNT-5A/ROR1-driven non-canonical Wnt pathway. While no selective CK1 inhibitors have reached clinical stage to date, one dual PI3Kδ and CK1ε inhibitor, umbralisib, is currently in clinical trials for CLL and NHL patients. In MDS, AML and MM, inhibition of CK1α, acting via activation of p53 pathway, showed promising preclinical activities and the first CK1α inhibitor has now entered the clinical trials.     

退火温度对0Cr25Al5热轧态盘条钢组织及性能的影响

采用显微组织分析和分子动力学模拟等方法研究了退火温度对0Cr25Al5热轧态盘条钢组织及性能的影响。结果发现,晶粒尺寸随温度的升高逐渐增加并趋于稳定,但是断后伸长率和断面收缩率在950 ℃突然大幅度下降。试样组织形貌在800 ℃和950 ℃退火温度下的OM及SEM分析结果未见明显差别。于是使用分子动力学模拟对0Cr25Al5钢三元体系的自由能进行了计算,发现随着B2结构的FeAl或者DO3结构的Fe₃Al有序相尺寸的增大,系统自由能先减小后增大,其最小值随着退火温度的升高向有序相颗粒尺寸减小的方向移动。在1273 K的高温下仍然会保留60 nm左右大小的有序相颗粒。因此,推测0Cr25Al5钢在大于950 ℃的温度范围内韧性下降是由于60 nm左右的B2结构的FeAl或者DO3结构的Fe₃Al有序相造成,与晶粒尺寸无关。因此,针对该钢种应进行低温退火促使基体组织回复以消除缺陷,从而抑制Fe、Al等基体原子的扩散。     

DZZ5型自动气象站多媒体故障排查系统的设计与研发

为更有针对性地进行故障排除工作,文章设计研发了一款多媒体软件平台,嵌入细化后的DZZ5型自动气象站各观测要素的故障排查流程,并在相应故障检测节点中添加文字、图片和操作视频。用户可按照流程逐一进行排查操作,或者搜索关键字查看节点内容。同时提供带有关键字查询功能的故障实例库,供基层装备保障业务人员参考。     

Analytical curvature-continuous dual-Bézier corner transition for five-axis linear tool path

A novel analytical five-axis path-smoothing algorithm is developed for the high speed machining of a linear five-axis tool path. Segment junctions of the linear tool path in the machine tool coordinate system, which are tangent-discontinuous points, are all blended by two transition cubic Bézier curves. One cubic Bézier curve is used to smooth the segment junction of the translational path, and the other Bézier curve is used to smooth the segment junction of the rotational path. The tangency and curvature continuities are both guaranteed in the new path. The dual-Bézier transition algorithm has three advantages: (1) Compared with the path-smoothing method in the workpiece coordinate system, the new dual-Bézier transition method directly and simultaneously smooths the machine tool axis trajectories of both translational path and rotational path. The feed speed and stability will both be improved because the tool path discontinuities are the most important source of feed fluctuation. (2) The constraints of approximation error and the synchronization of parametrization of two smoothed curves, which are the most challenging problems in the smoothing of 5-axis tool path, are both considered. (3) The transition cubic Bézier curve pair has an analytical solution and can be easily integrated in the real-time interpolator. Computational examples and the cutting experiment of an impeller blade show that the novel path-smoothing method has obvious advantages in both feed smoothness and cutting efficiency over the original linear interpolator.     

Electromagnetism-like algorithms for optimized tool path planning in 5-axis flank machining

Optimization of tool path planning using metaheuristic algorithms such as ant colony systems (ACS) and particle swarm optimization (PSO) provides a feasible approach to reduce geometrical machining errors in 5-axis flank machining of ruled surfaces. The optimal solutions of these algorithms exhibit an unsatisfactory quality in a high-dimensional search space. In this study, various algorithms derived from the electromagnetism-like mechanism (EM) were applied. The test results of representative surfaces showed that all EM-based methods yield more effective optimal solutions than does PSO, despite a longer search time. A new EM-MSS (electromagnetism-like mechanism with move solution screening) algorithm produces the most favorable results by ensuring the continuous improvement of new searches. Incorporating an SPSA (simultaneous perturbation stochastic approximation) technique further improves the search results with effective initial solutions. This work enhances the practical values of tool path planning by providing a satisfactory machining quality.