Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand‐free click synthesis of diverse 1,2,3‐triazoles and tetrazoles

Magnetic CuFe₂O₄/g‐C₃N₄ hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X‐ray diffraction, high‐resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N₂ adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe₂O₄/g‐C₃N₄ enabled superior performance in the one‐pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work‐up and isolation procedure.     

Fe3O4 – Glutathione stabilized Ag nanoparticles: A new magnetically separable robust and facile catalyst for aqueous phase reduction of nitroarenes

The heterostructured Ag nanoparticles decorated Fe₃O₄ Glutathione (Fe₃O₄‐Glu‐Ag) nanoparticles (NPs) were synthesized by sonicating glutathione (Glu) with magnetite and further surface immobilization of silver NPs on it. The ensuing magnetic nano catalyst is well characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), powder X‐ray diffraction (PXRD), thermogravimetric analysis (TGA). The prepared Fe₃O₄‐Glu‐Ag nanoparticles have proved to be an efficient and recyclable nanocatalyst with low catalyst loading for the reduction of nitroarenes and heteronitroarenes to respective amines in the presence of NaBH₄ using water as a green solvent which could be easily separated at the end of a reaction using an external magnet and can be recycled up to 5 runs without any significant loss in catalytic activity. Gram scale study for the reduction of 4‐NP has also being carried out successfully and it has been observed that this method can serve as an efficient protocol for reduction of nitroarenes on industrial level.     

甲烷-二氧化碳重整制合成气与现代分析技术应用于探究性化工专业实验的设计与探索

以甲烷-二氧化碳重整制合成气为实例，设计探究性实验，将合成气的制备和现代分析技术应用于化工专业实验的教学实践中以提高学生的创新和实践能力。实验包括催化剂的制备，催化剂的性能评价和催化剂的表征等3大部分。采用工业最常用的浸渍法制备含有不同助剂的Ni/X/γ-Al2O3（X为Co，Fe，MgO，CeO2）催化剂，以甲烷-二氧化碳重整反应评价其催化性能，并采用XRD、H2-TPR、BET和TG对催化剂的微观结构进行表征。结合催化剂的性能评价结果和表征结果，探讨不同助剂对镍基催化剂性能的改善效果及机制。通过开设该实验，可以让学生了解化工学科的前沿知识以及现代分析技术的基本原理和用途，掌握专业的实验操作、数据处理和谱图绘制方法，提高学生的专业素养和综合能力。     

Chromium complexes based on thiophene–imine ligands for ethylene oligomerization

A new set of Cr(III) complexes, {L}CrCl₃(THF), based on thiophene–imine ( 2a , L = PhOC₆H₄(N═CH)‐2‐SC₄H₃; 2b , L = PhOC₂H₄(N═CH)‐2‐SC₄H₃; 2c , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₃; 2d , L = PhOC₆H₄(N═CH)‐2‐SC₄H₂‐5‐Ph; 2e , L = Ph(NH)C₂H₄(N═CH)‐2‐SC₄H₂‐5‐Ph) have been prepared and characterized using elemental analysis and infrared spectroscopy. Upon activation with methylaluminoxane, all the chromium complexes generated active systems affording a nonselective distribution of α‐olefins with turnover frequencies in the range 9500–93 500 (mol ethylene) (mol Cr)^?1 h^?1, and producing mostly oligomers (95.0–99.3 wt% of total products). Small amounts of polymer were produced in these oligomerization reactions (0.8–8.2 wt%). The catalytic activities were quite sensitive to the ligand environment. Moreover, the effects of oligomerization parameters (temperature, [Al]/[Cr] molar ratio, time) on the activity and on the product distribution were examined.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Advanced Li-Ion Batteries with High Rate,Stability, and Mass Loading Based on Graphene Ribbon Hybrid Networks

To optimize the cycle life and rate performance of lithium-ion batteries (LIBs), ultra-fine Fe₂O₃ nanowires with a diameter of approximately 2 nm uniformly anchored on a cross-linked graphene ribbon network are fabricated. The unique three-dimensional structure can effectively improve the electrical conductivity and facilitate ion diffusion, especially cross-plane diffusion. Moreover, Fe₂O₃ nanowires on graphene ribbons (Fe₂O₃/GR) are easily accessible for lithium ions compared with the traditional graphene sheets (Fe₂O₃/GS). In addition, the well-developed elastic network can not only undergo the drastic volume expansion during repetitive cycling, but also protect the bulk electrode from further pulverization. As a result, the Fe₂O₃/GR hybrid exhibits high rate and long cycle life Li storage performance (632 mAh g⁻¹ at 5 A g⁻¹, and 471 mAh g⁻¹ capacity maintained even after 3000 cycles). Especially at high mass loading (≈4 mg cm⁻²), the Fe₂O₃/GR can still deliver higher reversible capacity (223 mAh g⁻¹ even at 2 A g⁻¹) compared with the Fe₂O₃/GS (37 mAh g⁻¹) for LIBs.     

Enhanced 1T′-Phase Stabilization and Chemical Reactivity in a MoTe2 Monolayer through Contact with a 2D Ca2N Electride

Among the widely studied 2D transition metal dichalcogenides (TMDs), MoTe₂ has attracted special interest for phase-change applications due to its small 2H-1T′ energy difference, yet a large scale phase transition without structural disruption remains a significant challenge. Recently, an interesting long-range phase engineering of MoTe₂ has been realized experimentally by Ca₂N electride. However, the interface formed between them has not been well understood, and moreover, it remains elusive how the presence of Ca₂N would affect the basal plane reactivity of MoTe₂. To address this, we performed density functional theory (DFT) calculations to investigate the potential of tuning the phase stability and chemical reactivity of a MoTe₂ monolayer via interacting with Ca₂N to form a van der Walls heterostructure. We found that the contact nature at the 2H-MoTe₂/Ca₂N interface is Schottky-barrier-free, allowing for the spontaneous electron transfer from Ca₂N to 2H-MoTe₂ to make it strongly n-type doped. Moreover, Ca₂N doping significantly lowers the energy of 1T′-MoTe₂ and dynamically triggers the 2H-to-1T′ transformation. The Ca₂N-induced phase modulation can also be applied to tune the phase energetics of MoS₂ and MoSe₂. Furthermore, using H adsorption as the testing ground, we also find that the H binding on the basal plane of MoTe₂ is enhanced after forming heterostructure with Ca₂N, potentially providing basis for surface modification and other related catalytic applications.