Solution-Synthesized Multifunctional Janus Nanotree Microswimmer

Synthetic active matters are perfect model systems for non-equilibrium thermodynamics and of great potential for novel biomedical and environmental applications. However, most applications are limited by the complicated and low-yield preparation, while a scalable synthesis for highly functional microswimmers is highly desired. In this paper, an all-solution synthesis method is developed where the gold-loaded titania-silica nanotree can be produced as a multi-functional self-propulsion microswimmer. By applying light, heat, and electric field, the Janus nanotree demonstrated multi-mode self-propulsion, including photochemical self-electrophoresis by UV and visible light radiation, thermophoresis by near-infrared light radiation, and induced-charge electrophoresis under AC electric field. Due to the scalable synthesis, the Janus nanotree is further demonstrated as a high-efficiency, low-cost, active adsorbent for water decontamination, where the toxic mercury ions can be reclaimed with enhanced efficiency.     

Facile high yield synthesis of MgCo2O4 and investigation of its role as anode material for lithium ion batteries

In this article, we have reported a one-step scalable synthesis of MgCo₂O₄ nanostructures as efficient anode material for Li-ion batteries and investigated the role of post-synthesis calcination temperature (400, 600 and 800 °C) on its physiochemical properties and electrochemical performances. The XRD pattern of the calcinated sample at 400 °C (MC 400) indicates a pure phase of MgCo₂O₄. However, on increasing the calcination temperature to 600 °C (MC 600), an additional phase corresponding to MgO was detected and the corresponding XRD peak intensity further increased on increasing the calcination temperature to 800 °C (MC 800 °C). This was accompanied by a morphological transformation from flake and rod-like nanostructures, to an agglomerated dense flake-like morphology. Electrochemical studies revealed that the calcination temperature plays an important role in determining the electrochemical performance of the MgCo₂O₄ as anode material. In a half cell, the MC 600 showed the best electrochemical performance with high discharge capacity of 980 mA h g⁻¹ (2nd discharge at 60 mA g⁻¹) and a reversible discharge capacity of 886 mA h g⁻¹ at the end of 50 cycles with high coulombic efficiency of 98%. Long term stability was carried out at 0.5C which showed a capacity retention of 358 mA h g⁻¹ at the end of 500 cycles. The superior electrochemical performance of the MC600 can be attributed to the presence of the small amount of MgO, which is believed to provide the anode materials better structural stability during cycling. The claim was further supported by ex-situ TEM analysis of the anode material of a cycled cell (50 cycles).     

Hydrogen generation rate enhancement by in situ Fe(0) and nitroarene substrates in Fe3O4@Pd catalyzed ammonia borane hydrolysis and nitroarene reduction tandem reaction

We report the catalytic enhancement of hydrogen generation by 1) in situ Fe (0) formed and 2) nitroarenes substrates during Fe₃O₄@Pd core-shell nanoparticles catalyzed tandem reaction. The active hydrogen species are generated in Pd shell, which either combine to form H₂ gas or take part in relatively faster nitroarene reduction reaction. The rate of hydrogen generation from ammonia borane is dependent on the nitroarene substrate and is higher when 4-nitrophenol is used. This is due to the difference in ammonia borane adsorption on the surface of the catalyst. During recyclability, the H₂ generation rate of 2 wt% Pd loaded samples is higher than other compositions. Such an enhancement has been attributed to the formation of Fe (0) via γ-FeOOH mediated by Pd species, presumably through Pd(OH)₂. The electronic connection between Fe and Pd interface is thus shown to play an important role in the catalytic enhancement of the tandem reaction.     

Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

Application of bio-based dimer acid diglycidyl ester in paper-based copper clad laminate

Using dimer acid (DA) as raw material, DA diglycidyl ester (DADGE) was synthesized and used as reactive toughening agent to prepare paper-based copper clad laminate (p-CCL). The factors affecting the epoxy value of DADGE and the effect of the resin on the gelation time were studied. The effects of the epoxy value and the addition amount of DADGE on the solderleaching resistance, flammability, water absorption, bending strength, and impact strength of the p-CCL were discussed. The results showed when the molar ratio of DA to ECH was 1:8 and the molar ratio of DA to sodium hydroxide was 1:1.6, the epoxy value of DADGE reached the maximum value of 0.23 mol/100 g. The DADGE can shorten the gelation time of the glue. The p-CCL meets the performance of the IPC-TM-650 standard. And when the addition amount of DADGE is less than 12 wt %, the flammability of the p-CCL reaches UL94V-0 level. The p-CCL prepared by adding 6 wt % of DADGE with 0.08 mol/100 g epoxy value has the best comprehensive performance, its toughness and rigid are comparable to those of p-CCL with 12 wt % of commercially available high performance toughening agents and it has higher solderleaching resistance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47508.     

Homotopy continuation enhanced branch and bound algorithms for strongly nonconvex mixed-integer nonlinear optimization

Large-scale strongly nonlinear and nonconvex mixed-integer nonlinear programming (MINLP) models frequently appear in optimization-based process synthesis, integration, intensification, and process control. However, they are usually difficult to solve by existing algorithms within acceptable time. In this study, we propose two robust homotopy continuation enhanced branch and bound (HCBB) algorithms (denoted as HCBB-FP and HCBB-RB) where the homotopy continuation method is employed to gradually approach the optimum of the NLP subproblem at a node from the solution at its parent node. A variable step length is adapted to effectively balance feasibility and computational efficiency. The computational results from solving four existing process synthesis problems demonstrate that the proposed HCBB algorithms can find the same optimal solution from different initial points, while the existing MINLP algorithms fail or find much worse solutions. In addition, HCBB-RB is superior to HCBB-FP due to much lower computational effort required for the same locally optimal solution.     

Combining molybdenum carbide with ceria overlayers to boost Mo/CeO2 catalyzed ammonia synthesis

The design of an efficient non-noble metal catalyst is of burgeoning interest for ammonia synthesis. Herein, we report a Mo₂C/CeO₂ catalyst that is superior in ammonia synthesis activity. In this catalyst, molybdenum carbide coexisted with the ceria overlayers which is from the ceria support as the strong metal–support interaction. There is a high proportion of low-valent Mo species, as well as high concentration of Ce³⁺ and surface oxygen species. The presence of Mo₂C and CeO₂ overlayers not only leads to enhancement of hydrogen and nitrogen adsorption, but also facilitates the desorption and exchange of adsorbed species with the gaseous reagents. Compared with the Mo/CeO₂ catalyst prepared without carbonization, the Mo₂C/CeO₂ catalyst is more than sevenfold higher in ammonia synthesis rate. This work not only presents an explicit example of designing Mo-based catalyst that is highly efficient for ammonia synthesis by tuning the adsorption and desorption properties of the reactant gases, but opens a perspective for other elements in ammonia synthesis.     

Various density light field image coding based on distortion minimization interpolation

In recent years, the light field (LF) as a new imaging modality has attracted wide interest. The large data volume of LF images poses great challenge to LF image coding, and the LF images captured by different devices show significant differences in angular domain. In this paper we propose a view prediction framework to handle LF image coding with various sampling density. All LF images are represented as view arrays. We first partition the views into reference view (RV) set and intermediate view (IV) set. The RVs are rearranged into a pseudo sequence and directly compressed by a video encoder. Other views are then predicted by the RVs. To exploit the four dimensional signal structure, we propose the linear approximation prior (LAP) to reveal the correlation among LF views and efficiently remove the LF data redundancy. Based on the LAP, a distortion minimization interpolation (DMI) method is used to predict IVs. To robustly handle the LF images with different sampling density, we propose an Iteratively Updating depth image based rendering (IU-DIBR) method to extend our DMI. Some auxiliary views are generated to cover the target region and then the DMI calculates reconstruction coefficients for the IVs. Different view partition patterns are also explored. Extensive experiments on different types LF images also valid the efficiency of the proposed method.     

Layered ceramics based on InGaO3(ZnO)2: Preparation and experimental investigation of high-temperature heat capacity and thermal conductivity

This paper reports on a method for producing ceramics from a high-purity, submicron InGaO₃(ZnO)₂ powder synthesised using a PVA-assisted gel combustion method, as well as an experimental study of the thermophysical properties of the ceramic materials obtained. The platelet-like crystallites of the InGaO₃(ZnO)₂ obtained were several microns long and up to several hundred nanometres thick. Layered ceramics obtained by sintering compacted InGaO₃(ZnO)₂ powders at temperatures of 1373–1773 K had a bulk density that was 68–96 % of the theoretical density. The temperature dependence of heat capacity in the range 306–1346 K was studied experimentally for InGaO₃(ZnO)₂ using the DSC method. It was found that, in the range 323–1173 K, layered InGaO₃(ZnO)₂ ceramics had a low thermal conductivity, which decreased from 2.0–1.3 W/(m K. The results obtained make it possible to consider this material as a promising thermal barrier coating.     

Lactones in the Synthesis of Prostaglandins and Prostaglandin Analogs

In the total stereo-controlled synthesis of natural prostaglandins (PGs) and their structural analogs, a vast class of compounds and drugs, known as the lactones, are encountered in a few key steps to build the final molecule, as: δ-lactones, γ-lactones, and 1,9-, 1,11-, and 1,15-macrolactones. After the synthesis of 1,9-PGF_2α and 1,15-PGF_2α lactones, many 1,15-lactones of E₂, E₃, F₂, F₃, A₂, and A₃ were found in the marine mollusc Tethys fimbria and the quest for understanding their biological role stimulated the research on their synthesis. Then 1,9-, 1,11-, and 1,15-PG lactones of the drugs were synthesized as an alternative to the corresponding esters, and the first part of the paper describes the methods used for their synthesis. The efficient Corey procedure for the synthesis of prostaglandins uses the key δ-lactone and γ-lactone intermediates with three or four stereocenters on the cyclopentane fragment to link the PG side chains. The paper describes the most used procedures for the synthesis of the milestone δ-Corey-lactones and γ-Corey-lactones, their improvements, and some new promising methods, such as interesting, new stereo-controlled and catalyzed enantioselective reactions, and methods based on the chemical/enzymatic resolution of the compounds in different steps of the sequences. The many uses of δ-lactones not only for the synthesis of γ-lactones, but also for obtaining 9β-halogen-PGs and halogen-substituted cyclopentane intermediates, as synthons for new 9β-PG analogs and future applications, are also discussed.