Morphological and palynological assessment of taxonomically problematic genus Paspalum based on light and scanning electron microscopy

Present research work was carried out to clarify the variations among species of genus Paspalum morphologically and palynologically as this genus is taxonomically difficult due to having multiple similar morphologically overlapping characters which make it difficult to identify. Henceforth present research work was carried out to delimit taxa within the same genus by morphological and palynological tools through light microscopy (LM) and scanning electron microscopy (SEM). Both these tools are considered as the most useful taxonomic characters for taxonomically problematic genera. The results showed a lot of variations among morphological characters. In Paspalum dilatatum, the upper glume was ovate whereas in the other two species, the upper glume was elliptic. The upper glume apex found in P. dilatatum and Paspalum scrobiculatum was obtuse whereas in Paspalum distichum, upper glume apex was acute. Glume nerves showed variation in all three species. Paspalum distichum was 3 nerved, P. scrobiculatum was 5–7 nerved, and P. dilatatum was 5–9 nerved. All three species showed variation in lemma nerves. Paspalum scrobiculatum had 3 nerved lemma whereas in P. distichum 3–5 nerved and P. dilatatum 5–9 nerved lemma were present. In polar and equatorial view, pollen grains ranged from 25 (20–30) to 37.5 (30–45) μm. Paspalum distichum appeared to be the smallest in size whereas P. dilatatum was the largest. Exine thickness ranged from 0.75 (0.5–1) to 1.35 (1.2–1.5) μm. The higher value of pollen fertility was found in P. scrobiculatum as 87.69% and the lowest value was in P. distichum as 78.08%. Morphological keys were also given for correct identification.     

Analysis of spatially distributed FU-FB S-ALOHA in fading channels using TUA

The tagged user analysis (TUA) is a generic approximate method developed to analyze random access protocols for finite-user finite-buffer systems that avoids complexities of Markovian analysis by using available queueing results. In this paper, TUA method is extended to the analysis of finite buffer S-ALOHA operating over flat fading radio channels when the user population is spatially distributed. The expressions for system performance indices are derived. It is shown that for moderate number of active users, the simulation and analytical results have a close fit.     

Identification of Proteins Modulated in the Date Palm Stem Infested with Red Palm Weevil (Rhynchophorus ferrugineus Oliv.) Using Two Dimensional Differential Gel Electrophoresis and Mass Spectrometry

A state of the art proteomic methodology using Matrix Assisted Laser Desorption/Ionization-Time of Flight (MALDI TOF) has been employed to characterize peptides modulated in the date palm stem subsequent to infestation with red palm weevil (RPW). Our analyses revealed 32 differentially expressed peptides associated with RPW infestation in date palm stem. To identify RPW infestation associated peptides (I), artificially wounded plants (W) were used as additional control beside uninfested plants, a conventional control (C). A constant unique pattern of differential expression in infested (I), wounded (W) stem samples compared to control (C) was observed. The upregulated proteins showed relative fold intensity in order of I > W and downregulated spots trend as W > I, a quite interesting pattern. This study also reveals that artificially wounding of date palm stem affects almost the same proteins as infestation; however, relative intensity is quite lower than in infested samples both in up and downregulated spots. All 32 differentially expressed spots were subjected to MALDI-TOF analysis for their identification and we were able to match 21 proteins in the already existing databases. Relatively significant modulated expression pattern of a number of peptides in infested plants predicts the possibility of developing a quick and reliable molecular methodology for detecting plants infested with date palm.     

Isolate-Specific Effect of Entomopathogenic Endophytic Fungi on Population Growth of Two-Spotted Spider Mite (Tetranychus urticae Koch) and Levels of Steroidal Glycoalkaloids in Tomato

Journal of Chemical Ecology - Entomopathogenic fungi (EPF) can be experimentally established in several plant species as endophytes. Ecological effects of EPF inoculations on plant growth and...     

Marangoni convective nanofluid flow over an electromagnetic actuator in the presence of first‐order chemical reaction

The present study aims to investigate Marangoni‐forced convective nanofluid flow over an electromagnetic actuator (Riga plate). A first‐order homogeneous chemical reaction is considered. The thermocapillary and solutocapillary Marangoni effect developed by the surface tension is considered as a driving force for the nanofluid. In addition, Grinberg‐term is accounted to involve the impact of Lorentz force impinged by the actuator in the model. A set of nonlinear ordinary differential equations is obtained via suitable transformations for a nonsimilar analysis. Series solutions are achieved through homotopy to discuss the behavior of the velocity field, thermal distribution, and concentration of the nanoparticles graphically. The variation in Nusselt and Sherwood numbers is discussed. The outcomes declared that the flow parallel to the surface of the plate is assisted by the Lorentz forces generated by electromagnetic bars of the actuator resulting in an enhancement in the fluid motion. Furthermore, the stronger Marangoni effect resulted in the declining trend of the temperature profile. The concentration of nanoparticles near the surface reduced intensive chemical reaction inside the nanofluid.     

A study of spin rectification effect enhancement of microwave field by a PIFA

The progress of spin rectification effect, which has the potential in powering the nanoscopic devices wirelessly, has been impeded by its low conversion efficiency. To solve this problem, a 5.8 GHz planar inverted F‐shaped antenna, which is designed to harvest radiated microwave power as well as foster a field enhanced area surrounding a permalloy (Py, Ni₈₀Fe₂₀) monolayer, is presented. The electric and magnetic field are enhanced by ~17.5‐fold and ~ 45‐fold, respectively. With the proposed antenna, a photovoltage of 0.85 μV can be detected in the monolayer 1.5 m away from the transmitting antenna, with input power of 30 dBm. This work provides an effective method to enhance the spin rectification effect signal in the far field region and paves the way for spintronic devices to be potentially utilized in practical wireless applications, such as quantum information, photovoltaics, and nanogenerator.     

A research on sintering characteristics and mechanisms of dried sewage sludge

This study investigates the sintering behavior of dried sewage sludge and the related sintering mechanisms, considering sintering temperature and sintering time. Experimental results indicate that the characteristics are primarily influenced by sintering temperature. When the sintering temperature is increased from 1020 to 1050 °C, the specimens’ compressive strength and bulk density increase significantly, while water absorption decreases obviously, indicating an improvement of densification due to sintering. However, the compressive strength cannot meet the requirement for traditional ceramic products due to the release of organic matters and the formation of big pores in the products. Phosphorus in sewage sludge initially takes reactions with the formation of calcium magnesium phosphate and aluminum phosphate during sintering, which are helpful for enhancing the compressive strength. So, some materials with high contents of Al could be used to enhance the compressive strength of products. Heavy metals are fixed primarily inside the sintered specimens, with the As, Pb, Cd, Cr, Ni, Cu, Zn concentrations in the leachate found to be in the range of China regulatory requirements. These results reveal the feasibility of recycling dried sewage sludge by sintering as a construction material.     

Structural and Mechanical Properties of Al/B4C Composites Fabricated by Wet Attrition Milling and Hot Extrusion

In this study,Al matrix composites reinforced by 7.5 and 15 vol.%B₄C particles and also monolithic Al（Al without the B₄C particles） were produced by wet attrition milling and subsequent hot forward extrusion processes.The microstructure of the composites,evaluated by scanning electron microscopy（SEM）,showed that the B₄C particles were properly distributed in the Al matrix.Mechanical properties of the AI/B₄C composites and monolithic Al were investigated by tensile,wear and hardness tests.The results revealed that with increasing content of B₄C particles,the tensile strength and microhardness of composites increased but the elongation decreased.In addition,the tensile strength and microhardness of composite samples were higher than those of monolithic Al.The density measurements revealed that the density of composites decreased with increasing content of the B₄C particles.     

Phytochemical and Biological Studies of Agave attenuata

The present study was conducted to examine various biological activities of a methanol extract of Agave attenuata leaves. GC-MS analysis of the n-hexane fraction from the extract revealed the presence of 31 compounds, with mono-2-ethylhexyl phthalate (11.37%), 1,2-benzenedicarboxylic acid (6.33%), n-docosane (6.30%) and eicosane (6.02%) as the major components. The leaves contained appreciable levels of total phenolic contents (10.541-39.35 GAE, mg/100 g) and total flavonoid contents (43.35-304.8 CE, mg/100 g). The extract and some of its fractions showed moderate antimicrobial effects. Leaves extract and fractions also exhibited a good antioxidant potential when measured by DPPH radical scavenging activity and inhibition of lipid peroxidation assays. The hemolytic effect of the plant was found to be in a range of 1.01%-2.64%. From the present study it is concluded that this plant could be used as a source of natural antioxidants and functional food nutraceutical applications.     

On the stability of a microbeam conveying fluid considering modified couple stress theory

In this paper, the size-dependent vibrational behavior of a microbeam conveying fluid was investigated using the Modified Couple Stress Theory. For cantilever and clamped-clamped microbeams, the small amplitude vibration equation of the micro-beams was solved using a Galerkin based reduced order model and the effects of material length-scale parameter on its natural frequencies were evaluated. It was found that for the both cantilever and clamped-clamped conditions, the critical fluid velocities predicted by the modified couple stress theory are higher than those predicted by the classical beam theory. In addition, the differences between the eigen-frequencies and the critical fluid velocities predicted by the modified couple stress theory and classical beam theory depends on the ratio of the material length-scale parameter to the beam height. In addition an unexpected result in the difference between the first eigen-frequency of the cantilever micro-beam obtained by the classical and the modified couple stress theory has been achieved.