大型光学遥感卫星高可靠高性能综合电子系统设计

针对大型光学遥感卫星高可靠高性能和好用易用的需求,设计了一种具有高度容错能力的综合电子系统,详细介绍了 系统的体系架构和信息流设计,深入探讨了卫星运行管理和系统容错机制等关键设计技术。 介绍了所设计综合电子系统在某 型号卫星上的在轨应用情况,该卫星充分采用了论文提出的多冗余备份架构、容错技术和运行管理技术,平均每天完成 21 次成 像和 11 次数传,日均拍摄面积高达 1 100 000 km 2 ,最长连续无故障运行时间超过 6 个月,充分验证了所设计综合电子系统具有 在轨高效稳定运行的能力。     

Critical factors and paths influencing construction workers’ safety risk tolerances

While workers’ safety risk tolerances have been regarded as a main reason for their unsafe behaviors, little is known about why different people have different risk tolerances even when confronting the same situation. The aim of this research is to identify the critical factors and paths that influence workers’ safety risk tolerance and to explore how they contribute to accident causal model from a system thinking perceptive. A number of methods were carried out to analyze the data collected through interviews and questionnaire surveys. In the first and second steps of the research, factor identification, factor ranking and factor analysis were carried out, and the results show that workers’ safety risk tolerance can be influenced by four groups of factors, namely: (1) personal subjective perception; (2) work knowledge and experiences; (3) work characteristics; and (4) safety management. In the third step of the research, hypothetical influencing path model was developed and tested by using structural equation modeling (SEM). It is found that the effects of external factors (safety management and work characteristics) on risk tolerance are larger than that of internal factors (personal subjective perception and work knowledge & experiences). Specifically, safety management contributes the most to workers’ safety risk tolerance through its direct effect and indirect effect; while personal subjective perception comes the second and can act as an intermedia for work characteristics. This research provides an in-depth insight of workers’ unsafe behaviors by depicting the contributing factors as shown in the accident causal model developed in this research.     

Integration of geometric variation and part deformation into variation propagation of 3-D assemblies

This paper introduces a novel modelling method for variation propagation calculation of 3-D assemblies taking into account geometric variation and part deformation, which are neglected in most models in tolerance analysis. Initially, numerical studies are carried out in order to illustrate the characteristics of strain distribution in components and contact forces on the mating surfaces of a 3-D assembly. According to these characteristics, a linear equivalent model using springs to represent the elastic mating surfaces with geometric variation was presented. Then, the equilibrium criterions corresponding to actual contact situations and iterative searching algorithm of the equilibrium status of contacting were developed. The proposed modelling and calculation method were finally applied to the assembly of two machined parts, on which finite-element analyses and experimental tests were conducted to validate the effectiveness and accuracy. This linear contact model also shows an important advantage on modelling and calculating efficiency, which enable the practical application to variation propagation calculation in both tolerance design and assembly process.     

A Modified Region Approach for Multivariate Measurement System Capability Analysis

Measurement system capability analysis is to determine whether the measurement system is capable for use in quality control. The existing research has been extended from univariate to multivariate cases. Two approaches, the multivariate analysis of variance (MANOVA) and the weighted principal components (WPC), were advocated in literature. The MANOVA method is constructed based on the volume ratio that treats the volume of constant‐density contours as the variability estimations. However, it ignores the fact that the relative position change of multivariate measurement errors could affect the measurement system capability. The WPC method uses dimension reduction to reduce the complexity but is unable to build the precision‐to‐tolerance ratio because it does not include tolerance. In this paper, we propose a modified‐region‐based method to compute the precision‐to‐tolerance ratio, the percent of repeatability and reproducibility, and the signal‐to‐noise ratio. This method also incorporates the variance–covariance structure of the measurement errors when dealing with the constant‐density contours of tolerances, total variation, and process variation. The performance of the modified‐region‐based method is evaluated based on a dataset from the literature and a set of relevant simulation. The proposed method proves to be effective compared with other methods.Copyright © 2014 John Wiley & Sons, Ltd.     

AutoProc: An automatic proactive replication scheme for P2P storage

Due to the prevalence of peer departures, P2P storage systems need to constantly generate replicas for high durability. However, few existing systems are able to select the right replication rate that balances replication cost and durability, e.g., minimizing replication cost without threatening the durability target. In this paper, we propose a method called AutoProc to automate the replication process in P2P storage systems. AutoProc employs two key techniques to enable cost-effective replication: correct...     

Super connectivity of Kronecker products of graphs

Let G₁ and G₂ be two connected graphs. The Kronecker product G₁×G₂ has vertex set V(G₁×G₂)=V(G₁)×V(G₂) and the edge set . In this paper, we show that if G is a bipartite graph with κ(G)=δ(G), then G×Kn(n?3) is super-κ.     

结构化P2P系统中副本一致性管理的一种新算法

结构化P2P系统通常使用数据复制来提高数据可用性,但P2P环境中的节点搅动、多节点并发更新以及恶意节点的存在也为副本的一致性管理带来了新的挑战.基于协商的算法要求节点间以全交换的方式通讯,在P2P环境中其可伸缩性不够理想.本文针对结构化P2P系统提出一种基于Quorum的副本管理算法:使用混合失效模型降低容错开销,利用DHT服务处理节点搅动,将数据存储与其元信息管理分离,使数据可靠性和数据可用性得以独立调整.模拟实验表明该算法可以明显改善系统的可伸缩性,减少系统的容错开销.