广义频率响应函数的鲁棒建模新方法

针对基于非线性谱分析的故障诊断技术的需要,研究了非线性系统的广义频率响应函数的鲁棒在线建模方 法。首先将次元分析算法应用于Volterra级数模型的辨识,并通过对此算法的修正,得到了一种改进的Volterra系统的鲁 棒辨识算法。对其鲁棒性能进行的分析表明,改进算法的鲁棒抗噪性能被明显提高。在此基础上,提出了一种广义频率响 应函数的两步鲁棒建模新方法。仿真实验表明,该方法具有良好的鲁棒收敛性能,能够有效解决GFRF的在线建模问题。     

Iterative finite element model of nonlinear viscoplastic analyses for blended granular porous media

The iterative finite element model, in which an element is used to represent a single particle, is generated to analyze the global behavior of multiple-material aggregates of materially nonlinear viscoplastic particles. The generalized Maxwell model is used to define four types of specific nonlinear viscoplastic materials, which are the elasto visco-plastic matter with linear viscosity, the plasto visco-plastic material with linear viscosity, the elasto visco-plastic media with nonlinear viscosity, and the plasto visco-plastic media with nonlinear viscosity. The theory and relevant penalty iterative algorithm are developed to analyze the four representative mixed granular systems consisting of materially nonlinear viscous particles. To verify precision of stress calculation, solutions of an axis-symmetric radial flow problem are compared with results of the literature and they are in a great agreement. The results present here provide significant insight into the fundamental behavior of granular media under compaction conditions, including prediction of the overall aggregates stress-strain response.     

SPECTRAL DENSITY ESTIMATION FROM NONLINEARLY OBSERVED DATA

Abstract. The estimation of the spectral density function of a stationary Gaussian process at the input of an instantaneous nonlinearity is considered when the nonlinearity is known and a finite set of observations of the output process is given. A class of spectral estimates is considered and their quadratic-mean consistency is established; precise asymptotic expressions for their bias and covariance are derived and their asymptotic normality is obtained.     

New Engineered Particles from Spray Dryers: Research Needs in Spray Drying

This article reviews developments in the simulations of spray dryer behavior, including the challenges in modeling the complex flow patterns inside the equipment, which are often highly transient and three-dimensional in nature. There appears to be considerable scope for using CFD simulations for investigating methods to reduce the rates of wall deposition and of thermal degradation for particles by modifying the air flow patterns in the chamber through small changes in the air inlet geometry. Challenges include building particle drying kinetics and reaction processes, as well as agglomeration behavior, into these simulations. The numerical simulations should be valuable supplements to pilot-scale testing, enabling more extensive and accurate optimization to be carried out than hitherto possible. New understanding of reaction processes and materials science, in combination with recent knowledge of the application of CFD to these problems, may enable new engineered powder products to be developed from the one-step spray-drying process.     

板型燃料组件内部温度场数值模拟

以板型燃料组件为研究对象，采用商用流体力学计算程序CFX5对板型燃料组件内部温度场进行数值模拟。数值计算结果表明：燃料组件不同流道的流速分布和温度分布均较均匀，单一流道的流速分布和温度分布也较均匀。燃料板所构成的各流道从外到内流速变化不太大，在中间流道内流速稍小一些，但差值很小；燃料组件单一流道内的流速在壁面附近快速减小，壁面上流速为0。燃料板和定位梳的温度最高，侧板温度与板间流体温度相近，侧板外侧的流体温度较低。     

Flow Control Through the Use of Topography

In this work, optimal shaft shapes for flow in the annular space between a rotating shaft with axially-periodic radius and a fixed coaxial outer circular cylinder, are investigated. Axisymmetric steady flows in this geometry are determined by solving the full Navier-Stokes equations in the actual domain. A measure of the flow field, a weighted convex combination of the volume averaged square of the L₂-norm of the velocity and vorticity vectors, is employed. It has been demonstrated that boundary shape can be used to influence the characteristics of the flow field, such as its velocity component distribution, kinetic energy, or even vorticity. This ability to influence flow fields through boundary shape may be employed to improve microfluidic mixing or, possibly, to minimize shear in biological applications.     

Chemical vapor deposition of amorphous ruthenium-phosphorus alloy films

Chemical vapor deposition growth of amorphous ruthenium-phosphorus films on SiO₂ containing ∼ 15% phosphorus is reported. cis-Ruthenium(II)dihydridotetrakis-(trimethylphosphine), cis-RuH₂(PMe₃)₄ (Me = CH₃) was used at growth temperatures ranging from 525 to 575 K. Both Ru and P are zero-valent. The films are metastable, becoming increasingly more polycrystalline upon annealing to 775 and 975 K. Surface studies illustrate that demethylation is quite efficient near 560 K. Precursor adsorption at 135 K or 210 K and heating reveal the precursor undergoes a complex decomposition process in which the hydride and trimethylphosphine ligands are lost at temperatures as low at 280 K. Phosphorus and its manner of incorporation appear responsible for the amorphous-like character. Molecular dynamics simulations are presented to suggest the local structure in the films and the causes for phosphorus stabilizing the amorphous phase.     

柴达木盆地北缘的右行走滑冲断系统及其动力学

通过对于断裂系统分析和地球物理资料的解释,证实了柴达木盆地北缘西段的主要构造形成时间为上新世以后,变形样式为一系列右行走滑冲断构造。走滑冲断构造带内部的断层在平面上呈分支复合,剖面上表现为正花状构造,断层上、下盘地层层序无法直接对比。右行走滑冲断构造形成于南祁连由北向南的斜向推覆作用,而主要应力来源于柴达木地块北缘由南向北的陆内俯冲作用。用一个运动学模型解释了柴北缘的右行走滑冲断作用机制。     

压电陶瓷微位移器件迟滞模型的研究

在通过统计物理学角度分析压电陶瓷迟滞规律的基础上，结合数学建模方法，提出了一种简单实用的压电陶瓷迟滞数学模型。并设计了压电陶瓷实验控制系统，对迟滞数学模型进行了验证，实验结果表明，此模型可以有效减小压电陶瓷的迟滞非线性误差，提高压电陶瓷微位移的控制精度，本研究有助于实现基于压电陶瓷的高精度开环微位移控制。     

特低渗透油藏驱替及开采特征的影响因素

应用非达西渗流理论和非线性弹性渗流理论，分析了影响特低渗透油藏驱替及开采特征的主要因素。研究结果表明，启动压力梯度和毛细管压力是影响特低渗透油藏驱替特征的主要因素；而影响特低渗透油藏开采特征的主要因素是储层的弹塑性，即储层的压力敏感性。在特低渗透油藏的开发中应适当缩小注采井距提高驱替压力梯度，采取整体压裂措施减小启动压力梯度，通过气驱或活性水驱油减小毛细管压力，及时补充地层能量以减少压力敏感性对储层的伤害。