Comparison Between a Pt–Rh/Ba/Al2O3 and a Newly Formulated NOX-Trap Catalysts Under Alternate Lean–Rich Flows

In situ FT-IR spectroscopy coupled with mass spectrometry have been used to study the mechanism of nitrates formation and reduction over a common Pt–Rh/Ba/Al₂O₃ NO _x storage catalyst, compared with a different alumina-based compound.The experimental device used consists of a transmission reactor cell (having a very small dead volume) dedicated to the evolution of surface species, and of a mass spectrometer combined with a FT-IR micro-cell for gas analysis, allowing time resolved analysis in stationary and transient conditions.At the first time the nitration properties of the catalysts under a lean flow have been studied in the appropriate temperature window (473–673 K). The dynamics of nitrates formation has been pointed out, as well as the different coordination sites on the compounds surface. Then the catalysts have been alternatively exposed to rich and lean flows very close to the real exhaust composition. This has allowed the identification of reduction pathway, active sites, intermediate species and by-products for NO _X -trap reaction. In particular, we have differentiated the role of the support and of the noble metal in the mechanism, as well as of isocyanate adspecies and ammonia among the detected species. The very high NO _X storage properties and the selectivity (near 100%) in nitrogen of the newly designed catalyst have been pointed out.     

RF sputter deposition of poly(tetrafluoroethylene) films as masking materials for silicon micromachining

Polymers have been studied extensively because of their wonderful array of properties. Their properties can be tailored by many means and can be made useful in many ways. Polymers can be crosslinked or branched and can provide different properties, such as conduction and passivation. This study dealt with the RF sputter deposition of poly(tetrafluoroethylene) (PTFE) films with the aim of using them as masking materials during the fabrication of various micromachined structures. The films were deposited on silicon substrates at different plasma powers (100, 150, and 200 W) for a constant deposition time (60 min). To test the masking properties, the deposited films were immersed in a 20 wt % aqueous KOH solution at 80°C for 60 min. The films showed lower contact angles and interfacial tension, and this indicated good adhesion of the films to the silicon substrates. Good adhesion is an essential quality of masking materials during micromachining. The structural properties of the as‐deposited and etched films were studied with Fourier transform infrared and X‐ray photoelectron spectroscopy. These indicated that the bonding groups and binding energies of C? F and C? CF matched the reported values well. Furthermore, the presence of C? F and C? CF bonds, even after the etching of silicon substrates in highly alkaline KOH solutions for 60 min, showed that the PTFE films remained unchanged in the etchant and, therefore, could function as good masking materials during the fabrication of micromachined structures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1183–1192, 2004     

Infrared studies of the interaction of carbon monoxide and dinitrogen with ferrisilicate MFI-type zeolites

Fourier transform IR spectroscopy of CO and N₂, adsorbed at liquid nitrogen temperature, was used to characterize an MFI-type H-FeZSM-5 ferrisilicate which was synthesized with a Si/Fe ratio of 50. Thermal treatment of this material at 773 and 973 K was performed in order to follow formation of extraframework species. On samples fired at 773 K Brønsted acid sites were present which gave an O-H stretching band at 3630 cm^–1. These hydroxyl groups formed adducts with both probe molecules, which were monitored by the corresponding bathochromic shift, . Corresponding values for adsorbed CO and N₂ were = –270 and = – 100, respectively. Increasing the firing temperature up to 973 K led to complete removal of iron from the zeolite framework, and consequent disappearance of Brønsted acidity. In this process, extraframework iron oxide species were formed which were also characterized by IR spectroscopy of the adsorbed probe molecules. Both CO and N₂ gave Lewis-type adducts with coordinatively unsaturated Fe³⁺ ions present in the extraframework material. A comparison is made with results of a previous study on the H-GaZSM-5 isomorph.     

二苯并噻吩合成方法的改进

对文献报道的由联苯和硫在AlCl3催化下反应合成二苯并噻吩(DBT方法中的提纯过程作了改进，大大简化了提纯步骤，使制备DBT的时间缩短了一半，产率为63．4％，经提纯后的成品含量达99．7％，其纯度、外观、晶相均优于进口试剂，但成本远低于进口试剂。产品用FT-IR、LRS、XRD和^1H NMR表征结果与文献报道完全相符合。     

Isotopic Oxygen Exchange and EPR Studies of Superoxide Species on the SrF2/La2O3 Catalyst

By using the in situ IR spectroscopy, the superoxide species (O₂⁻), characterized by the O–O stretching peak at 1130 cm⁻¹, was detected on the SrF₂/La₂O₃ catalyst at temperatures up to 973 K. The introduction of ¹⁸O₂ isotope caused the 1130 cm⁻¹ peak to shift to lower wavenumbers (1095 and 1064 cm⁻¹), consistent with the assignment of the spectra to the superoxide species. A good correlation between the rate of the disappearance of the O₂⁻ species and that of the formation of C₂H₄ was observed, suggesting that O₂⁻ was the active oxygen species responsible for the oxidative coupling of methane (OCM) on the SrF₂/La₂O₃ catalyst. This conclusion was reinforced by the EPR experiments (g_xx = 2.0001, g_yy = 2.0045, g_zz = 2.0685), showing that O₂⁻ was the only paramagnetic oxygen species detectable on the O₂-preadsorbed SrF₂/La₂O₃ catalyst. These results suggest that superoxide O₂⁻ can be a stable active oxygen species, whose role in the OCM reaction cannot be overlooked.     

高支化度酯类增塑剂的结构鉴定

利用AV50 0核磁共振波谱仪鉴定了一种从聚氨酯材料中分离出的增塑剂。这是一种新型的性能优良的耐迁移性脂肪族增塑剂。使用的手段有红外光谱 ,1 H NMR ,1 3C NMR ,1 3C 1 HCOSY ,1 H 1 HCOSY以及DEPT等技术。     

Interaction of CO with planar Au/TiO2 model catalysts at elevated pressures

The interaction of CO with structurally well-defined, planar Au/TiO₂ model catalysts at elevated pressures (up to 50 mbar) was studied in-situ by polarization-modulated infrared reflection absorption spectroscopy and ex-situ by X-ray photoelectron spectroscopy performed before and after CO exposure. The results indicate a CO-induced partial reduction of the oxide surface, which is evidenced by a low frequency C–O vibration at 2060 cm⁻¹, combined with a spreading of the Au nanoparticles due to a modification of the Au-oxide interface energy. In a 2:1 CO:O₂ atmosphere, TiO₂ support reduction was not observed, and a pre-reduced surface was re-oxidized. The consequences of these results for the understanding of the CO oxidation mechanism on Au/TiO₂ (model) catalysts are discussed.     

Durable antimicrobial treatment of cotton fabrics using N‐(2‐hydroxy)propyl‐3‐trimethylammonium chitosan chloride and polycarboxylic acids

N‐(2‐hydroxy)propyl‐3‐trimethylammonium chitosan chloride (HTCC), a water‐soluble chitosan quaternary ammonium derivative, was used as an antimicrobial agent for cotton fabrics. HTCC has a lower minimum inhibition concentration (MIC) against Staphylococcus aureus, Klebsiella pneumoniae, and Escherichia coli compared to that of chitosan; however, the imparted antimicrobial activity is lost on laundering. Thus crosslinking agents were utilized to obtain a durable antimicrobial treatment by immobilizing HTCC. Several crosslinkers such as dimethyloldihydroxyethylene urea (DMDHEU), butanetetracarboxylic acid (BTCA), and citric acid (CA) were used with HTCC to improve the laundering durability of HTCC treatment by covalent bond formation between the crosslinker, HTCC and cellulose. The polycarboxylic acid treatment was superior to the DMDHEU treatment in terms of prolonged antimicrobial activity of the treated cotton after successive laundering. Also, the cotton treated with HTCC and BTCA showed improved durable press properties without excessive deterioration in mechanical strength or whiteness when compared to the citric acid treatment. With the addition of only 0.1% HTCC to BTCA solutions, the treated fabrics showed durable antimicrobial activity up to 20 laundering cycles. The wrinkle recovery angle and strength retention of the treated fabrics were not adversely affected with the addition of HTCC. Therefore, BTCA can be used with HTCC in one bath to impart durability of antimicrobial activity along with durable press properties to cotton fabric. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1567–1572, 2003     

数字环境中的机构知识库研究略述

机构知识库（Institutional Repository,简称IR）,是伴随着开放获取运动出现的一个新概念,是数字学术环境中的一种资源存储形式和服务方式。综合国内外学者对IR的知识含义、特征、作用与意义的概述,以及国内外研究现状和IR发展中存在的问题,分析其与开放获取和数字图书馆的关系。     

碱体系中系列羟基苯基卟啉红外光谱和拉曼光谱性质研究

本文继续深入研究该体系中相关物质的红外光谱和拉曼光谱的性质.论文结果说明,在碱体系中,NaOH只与羟基苯基卟啉周边meso-位的羟基反应形成盐,这个性质与紫外可见光谱性质是一致的.同时这一结果也为研究卟啉与金属的相互作用提供了有益的理论支持.