TMN协议的攻击及其分类研究

对TMN协议的攻击进行分析，并从协议应该确保的安全日标，即保密性和认证性入手，结合采用的攻击方法对现有的攻击进行分类。     

SBR工艺发展应用综述

关于SBR工艺的书籍和文章很多。本文在这些资料的基础上整理总结 ,对经典SBR工艺的应用进行了综述 ,归纳了经典SBR工艺的特点 ,介绍了各种新型SBR工艺。     

基于Gibbs模型的提高图像分辨率方法

在提高图像分辨率过程中,选择合适的成像模型是获得高分辨率图像的一个关键因素。提出一种基于最大后验概率、采用Gibbs成像模型,并利用多帧序列图像重构高分辨率图像的方法,充分利用序列图像之间的累加信息,从而快速地获得较其他方法更优的高分辨率图像。     

Delamination Analysis for Laminated Composites. II: Numerical Verification

A validation of the delamination analysis models developed in a companion paper is provided through comparisons of predictions with finite‐element and elasticity solutions. The models are applied to the analysis of composite compression specimens reinforced with end tabs. An elasticity solution for the gage section of the specimens is developed. A comparison of the characteristic roots shows that the predictions of the models include the material and geometric parameters that control the behavior, and the roots corresponding to the basic stretching and bending modes are accurately predicted. The stress distribution at the interface between tabs and specimen is in good agreement with a finite‐element simulation. The interlaminar shear and peel stresses show an exponential increase with a maximum intensity at the free edges of the tabs. The behavior of previously tested specimens is explained; and practical guidelines for specimen design are provided to avoid unwanted extraneous modes of failure. The influence of the deformation modes associated with each model is investigated. An assessment of the accuracy and level of complexity is presented.     

The topographic normalization of hyperspectral data: implications for the selection of spectral end members and lithologic mapping

Compact Airborne Spectrographic Imager (CASI) hyperspectral data is used to investigate the effects of topography on the selection of spectral end members, and to assess whether the topographic correction improves the discrimination of rock units for lithologic mapping. A publicly available Digital Elevation Model (DEM), at a scale of 1:50,000, is used to model the radiance variation of the scene as a function of topography, assuming a Lambertian surface. Skylight is estimated and removed from the airborne data using a dark object correction. The CASI data is corrected on a pixel-by-pixel basis to normalize the scene to a uniform solar illumination and viewing geometry. The results show that topography has the effect of expanding end member clusters at times resulting in the overlap of clusters and that the correction process can effectively reduce the variation in detected radiance due to changes in local illumination. When topographic effects are embedded in the hyperspectral data, methods typically used for the selection of end members, such as the convex hull method, can miss end members or result in the selection of nonrepresentative pixels as end members. Thus, end members selected by some conventional methods are very likely “incomplete” or “nonrepresentative” if the topographic effect is embedded in the data. As shown in this study, the topographic correction can reveal hidden end members and achieve a better representation of end members via the statistical center of isolated clusters.     

基于小波的彩色序列图象压缩编码

此文提出了一种基于小波变换的运动估计算法，时间复杂度比常规算法降低了一个数量级，同时在估值精度上可与常规算法媲美。利用更佳频率分辨率小波分解处理运动补偿余量误差善了复现图象质量。实验结果表明，该算法在高压缩比情况下图象复现质量显著优于ＭＰＥＧ－２，具有广阔的应用前景。     

代数应力模式的分析解及其在充分发展旋转管流中的应用

本文通过求解雷诺应力在代数应力模式中与平均速度梯度之间的分析关系，研究了代数应力模式在涡旋流动特别是在充分发展旋转管流中存在的内在缺陷，这些缺陷的主要表现为：（１）在不考虑固壁对湍流影响的代数应力模式中，分析解给出Ｗ∝ｒ和ｖｗ＝０的错误结论；（２）若在代数应力模式中考虑固壁对湍流影响，在对称轴上会有ｖ＾２不等于ｗ＾２的非物理解。与诺应力输运模式相比，代数应力模式的缺陷归限结底在于该模式的基本假设不     

小方坯连铸机的PLC自动控制

本文对弧型小方坯连铸机工艺与设备进行了分析，介绍了连铸生产的ＰＬＣ控制系统。及其软件设计。     

计算机控制的SEESR实验系统的研制

SEESR(Simultaneous Electrochemical ESR)是研究电极过程中的自由基中间体行为的理想和方便的手段。在以前研制的ESR仪数据系统的基础上,我们应用IBM-PC/XT微机与JES-FE1XG型(JEOL产)ESR谱仪及HDV-7型恒电位仪研制了一套由计算机控制的SEESR实验装置。该系统可以完成包括循环伏安法、电流阶跃、电位阶跃及电位反转等多种电化学方法的SEESR实验。系统还具有包括数据平滑、曲线拟合等功能的多种数据处理软件,使用方便。我们应用模型化合物对该系统进行了实际测量,所得结果与文献报道一致。