非调质钢的合金设计与热加工工艺及性能

论述了非调质钢的性能特点，分析了V、Nb、Ti、Mn、Cr、Si等常用合金元素对非调质钢组织和力学性能的影响，并对热加工工艺、热处理等因素个性能的影响作了分析和讨论。     

堆焊技术在板带热连轧机支承辊上的应用

本文介绍堆焊技术在热连轧机支承辊再利用方面的试验和应用,叙述了堆焊材料的选择,堆焊工艺以及取得的效果和经济效益。     

B 炸药中绝热剪切带形成机理的细观研究

通过对快速加载后Ｃｏｍｐ．药柱剖面的扫描电镜和光学显微镜观察分析，对Ｃｏｍｐ．Ｂ炸药在快速加载下剪切带形成机理的微观机制有了初步的认识。文中采用形变试样的剖面观察分析方法，针对固体药柱这种比较软的材料，如何进行磨样、抛光、浸蚀，作了一些尝试和探索，总结出一套有效的实施办法。对不同加载速率条件下受压缩的药柱中细观组织进行了观察、分析、比较，首次给出国产Ｃｏｍｐ．Ｂ炸药装药的原始细观组织形貌，以及快速加载后药柱中细观组织形貌。经过分析，得到冲击载荷下炸药装药中绝热剪切带形成、发展的定性认识，为分析Ｃｏｍｐ．Ｂ炸药装药受冲击载荷时热点形成机理提供了一些有益的实验依据。     

Artificial neural network application for modeling the rail rolling process

Rail rolling process is one of the most complicated hot rolling processes. Evaluating the effects of parametric values on this complex process is only possible through modeling. In this study, the production parameters of different types of rails in the rail rolling processes were modeled with an artificial neural network (ANN), and it was aimed to obtain optimum parameter values for a different type of rail. For this purpose, the data from the Rail and Profile Rolling Mill in Kardemir Iron & Steel Works Co. (Karabük, Turkey) were used. BD1, BD2, and Tandem are three main parts of the rolling mill, and in order to obtain the force values of the 49 kg/m rail in each pass for the BD1 and BD2 sections, the force and torque values for the Tandem section, parameter values of 60, 54, 46, and 33 kg/m type rails were used. Comparing the results obtained from the ANN model and the actual field data demonstrated that force and torque values were obtained with acceptable error rates. The results of the present study demonstrated that ANN is an effective and reliable method to acquire data required for producing a new rail, and concerning the rail production process, it provides a productive way for accurate and fast decision making.     

Cu2O-CuAlO2-Cu基金属陶瓷导电性能研究

通过热压技术制备Cu2O-10CuAlO2-xCu金属陶瓷材料，并对其导电性能进行了研究。结果表明，Cu2O-10CuAlO2-xCu在Cu含量超过15wt．％后呈金属导电性。材料的微观结构观察及物理性能测试表明，金属陶瓷材料的电导率不仅取决于材料的金属相含量，还取决于金属相颗粒尺寸和孔隙率的大小。材料中金属相的颗粒尺寸取决于热压工艺参数，随着热压温度的升高而增大，但随热压压力的升高而减小。     

三元层状Ti2AlC陶瓷材料的合成制备研究

以Ti，Al，C微粉为原料，分别采用放电等离子(SPS)烧结工艺和热压工艺(HP)烧结制备Ti2AlC层状陶瓷材料。X射线衍射和扫描电镜(SEM)分析的结果表明：采用放电等离子(SPS)烧结工艺时，能够在1100℃的温度下制备高纯、致密Ti2AlC材料。采用热压工艺时，则很难合成高纯的Ti2AlC陶瓷材料。     

沥青水下成型技术的研究与应用

介绍了沥青水下成型新工艺。该工艺采用水下低温成型,生产出类似巧克力形状的沥青,彻底解决了沥青烟污染的问题。     

成形压力对氧化铝瓷球性能的影响

本文以不同的压力等静压成形瓷球，研究了成形压力对瓷球烧结温度、密度及耐磨性的影响。结果表明：在本研究系统内随着压力的增加瓷球的烧结温度下降，烧成温度范围拓宽。采用150MPa成形的瓷球密度最大且耐磨性最好。     

Self-propagating high-temperature synthesis of advanced ceramics MoSi2–HfB2–MoB

This study focuses on the investigation of the macrokinetic features of SHS (combustion synthesis) of elemental mixtures Mo–Hf–Si–B, in particular the mechanisms of structure and phase formation in the combustion front as well as the structure and properties of consolidated ceramics. Two routes for the fabrication of the composite SHS powder in system MoSi₂–HfB₂–MoB were used: (1) synthesis using Mo–Si–B and Hf–B mixtures followed by mixing of the combustion products and (2) synthesis using the four-component Mo–Hf–Si–B mixture. Dense ceramic samples with a homogeneous structure and low residual porosity (0.8–3.6%) were prepared by hot pressing of SHS powders. Although the particles size distribution and phase composition of SHS powders are similar for both synthesis routes, the structure and properties of both the composite SHS powders and hot-pressed ceramics differ considerably. Synthesis using the four-component Mo–Hf–Si–B mixture allows one to produce hierarchically ordered nanocomposite material with improved mechanical properties: hardness up to 17.6?GPa and fracture toughness up to 7.16?MPa?m^1/2.     

用压下法测定混有不同量未燃煤粉的高炉渣流动性

用压下法测定了混有不同量未燃煤粉的高炉渣的流动性．结果表明：活塞压下量的变化规律与炉渣粘度相关．压下量随温度升高而升高，随混入渣中未燃煤粉量的增加而降低．压下量增加，流动性变好．活塞压下量的变化可以定性判断混有不同量未燃煤粉高炉渣的流动性。