Prescheduling policy for real-time concurrency control: A performance evaluation

A new priority management policy, aprescheduling policy, is proposed. This policy can be applied on any conventional concurrency control protocol to schedule a real-time transaction. Costly preemption is avoided by the prescheduling policy, and parsing dataset of a transaction is not needed. Three widely used conventional concurrency control protocols (dynamic two-phase locking, basic timestamp ordering, and optimistic) are incorporated with the prescheduling policy to form three real-time concurrency control protocols. Performance of the three protocols is evaluated from three different viewpoints: database management systems, protocols, and transaction. From a database management system viewpoint, we show the prescheduling policy can improve the performance of protocols by raising thevalid ratio and reducingrestart counts. In general, two-phase locking with the prescheduling policy performs the best in most cases and yields the best choice for concurrency control in a real-time application. Deciding factors that affect performance of each protocol are identified from protocol viewpoint. Some suggestions are given for writing a timely transaction from the aspect of transaction viewpoint.     

氮对纳米硅氮薄膜品化的影响

在电容式耦合等离子体化学气相沉积系统中，用高氢稀释硅烷和氮气为反应气氛制备纳米硅氮（ｎｃ－ＳｉＮｘ：Ｈ）薄膜结果表明：当Ｎ＿２／ＳｉＨ＿４气体流量比（Ｘｎ）从１增加为４时，薄膜的晶态年从５８％降至１４％，晶粒尺寸从１０ｎｍ降至５ｕｍ，Ｎ／Ｓｉ含量比从０．０３增至０．１２．当Ｘｎ≥５，则生成非晶硅氮（ａ－ＳｉＮｘ：Ｈ）薄膜．当Ｘｎ从１增加为１０时，薄膜暗电导率从１０￣（－５）（Ωｃｍ）￣（－１）降至１０￣（－１１）（Ωｃｍ）￣（－１），具有逾渗行为，这与薄膜的晶态率紧密相关．     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

90°分束偏光镜光强分束比研究

给出了90°分束偏光镜的e,o光光强分束比的计算公式,以及光强分束比随光波长的变化曲线;在6328Å测得的光强分束比与计算值是一致的。     

In-chain functionalization by alternating anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene

Anionic copolymerizations of styrene (M₁) with excess 1-(4-dimethyl-aminophenyl)-1-phenylethylene (M₂) were conducted in benzene at 25°C for 24h, using sec-butyllithium as initiator. Narrow molecular weight distribution copolymers with M?;_n = 16.1 × 10³ g/mol (M?_w/M?_n = 1.04) and 38.2 × 10³g/mol (M?_w/M?_n = 1.05), and 24 and 38 moles of M₂ per macromolecule, respectively, were characterized by size exclusion chromatography, ¹H NMR spectroscopy and DSC. The monomer reactivity ratio, r₁ = 5.6, was obtained from the copolymer composition at complete consumption of M₁, assuming that the rate constant k₂₂ =0,i.e. r₂ =0. The polymers exhibited T_g values of 128 and 119°C, respectively, which correspond to an estimated T_g = 217°C for the hypothetical homopolymer of M₂.     

SDH中泊松分布下误块率与误码率的关系分析

本文较详细地介绍了ＳＤＨ中的ＢＩＰ误码校验方式，推导了泊松分布下，ＢＩＰ误块率与误码率的一般关系式，给出了ＳＤＨ中几种典型的误块率与误码率的关系曲线，并做了计算机模拟验证     

氢/空气火焰在半开口有障碍管道中的传播特性

针对氢／空气混合物，通过实验研究了其预混火焰在半开口管道中的火焰传播加速现象。结果表明，火焰传播状态随着氢气当量比的变化而发生改变。当氢／空气混合物被点燃后，由于障碍物的扰动，火焰在管道中不断加速传播，并最终到达一准稳态传播。在氢气当量比0．34附近时，火焰速度发生跃变。当氢气当量比足够大时，火焰传播由爆燃态转变为爆轰态。在本实验条件下，爆燃转准爆轰的临界条件是d/λ=2.6(d是圆环形障碍物内径，λ是爆轰格胞尺度）。障碍物阻塞比的变化对最大火焰速度和压力提升的影响不明显。     

鱼雷罐喷粉预处理优化研究

在已经得到的描述鱼雷罐喷粉处理基本参数具体表达式的基础上，运用多目标非线性优化方法，对工艺操作参数进行优化。