Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

赤道西太平洋大气边界层的诊断分析

利用１９９３年ＥＮＳＯ事件爆发（４月）前酝酿时期“热带大洋与全球大气－海洋耦合响应试验”强化观测阶段“向阳红五号”科学考察船１５５°Ｅ，２°Ｓ定点海洋气象和高空大气探测资料，分析了赤道西太平洋大气边界层特征。结果表明：赤道西太平洋上空辐合对流区边界层内也有等温或逆温层存在，大气边界层物理参数变化与大尺度海－气变异有密切关系，赤道太平洋沃克环流加强、东移，边界层上部逆温层出现概率明显增大，边界层内高湿层湿度减小。另外，边界层内实测风速、风向廓线随高度的变化基本上不服从Ｅｋｍａｎ规律，但由其平均，分量合成得到的平均风随高度的变化却基本符合Ｅｋｍａｎ规律。     

海洋天然气水合物的地震识别方法研究

天然气水合物作为21世纪新的自然能源将为人类的生存发展服务。20世纪60年代证实，俄罗斯西伯利亚的麦索亚哈气田为典型的天然气水合物形成的气田，70年代又在海底发现了固体天然气水合物岩样。1971年，RStoll首先将地震剖面中的似海底反向层解释为海洋天然气水合物存在的标志，后来被深海钻探证实，从此地震方法成为大面积研究天然气水合物的重要手段。天然气水合物既是潜在能源，也是影响环境和形成灾害的因素之一，因此，研究天然气水合物是人类在21世纪的重要课题。探讨海洋天然气水合物的地震识别方法，由于这项工作刚刚起步，还没有做出具体的成果，在此只能根据我们仅有的工作和参照国外分开的出版物，以及出国访问得到的有关资料进行分析，提出我们的一些基本设想，与各位专家探讨。     

地震作用对琼州海峡海缆路由区海底稳定性影向的分析

以琼州海峡的北海—临高段海缆路由为例,利用计算对比的方法,分析了地震作用下,路由区3m以浅海底土液化或滑移的可能性,评价了路由区海底的稳定性。结果发现,在地震烈度为Ⅶ度的地震作用下,砂性土海底的地震剪应力平均值(0.86kPa,1.72kPa和2.57kPa)小于砂性土的液化剪应力(1.60kPa,3.20kPa和4.81kPa);粘性土海底的地震剪应力平均值(1.25kPa,2.49kPa和3.74kPa)小于粘性土的抗滑剪应力平均值(4.07kPa,4.61kPa和4.49kPa),路由区海底稳定性良好;在地震烈度为Ⅷ度的地震作用下,砂性土海底的地震剪应力平均值(1.73kPa,3.45kPa和5.12kPa)大于砂性土的液化剪应力;粘性土海底的地震剪应力平均值(2.49kPa,4.98kPa和7.47kPa)除表层外,大于粘性土的抗滑剪应力,路由区海底会发生失稳破坏。     

广东红海湾、珠江口及电白—阳江近海第四纪沉积

根据物探和钻探资料，研究区内第四纪沉积物可分为两部分，下部地震反射结构复杂，斜层理发育，粒度较粗，为晚更新世产物；上部的地震反射结构简单，呈水平状或近水平状结构，粒度较细，为全新世沉积。     

Southern Segment of the European Geotraverse — a wide-angle seismic refraction experiment in the Sardinia Channel

The Sardinia Channel dataset was collected as part of the European Geotraverse (EGT)—a 4000 km seismic refraction line running from Northern Norway to the Sahara, designed to investigate the structure of the lithosphere beneath Europe. Wideangle seismic data recorded by ocean bottom seismometers deployed in the Sardinia Channel as part of the Southern Segment of the EGT, together with gravity data, were used to constrain the final crustal model. In the centre of the Channel the crust is identified as thinned continental in nature, with a crystalline thickness of 10 km overlain by 4 km of sediments and 2.5 km of water in the most extended region. High velocities in the lower crust in the central region are thought to represent an area of underplating or intrusion by igneous material caused by extension related to the opening of the Tyrrhenian Sea. The crust overlies an anomalously low velocity upper mantle.     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

冲绳海槽天然气水合物BSR的地震研究

根据多道地震反射资料分析,在冲绳海槽南部和中部发现了拟海底反射层(BSR)现象。通过对海底异常反射层的振幅特征、速度异常和AVO属性分析,说明该BSR可能反映了天然气水合物的存在,并发现冲绳海槽断层与天然气水合物的形成有密切关系。     

东营北部凸起带古冲沟储层分布规律研究

在油田勘探与开发中 ,充分认识古冲沟油气藏的勘探与开发是十分重要和有意义的。本文利用东营北部凸起带的地质、钻井、航磁和地震等资料 ,对古冲沟在地震剖面上的特征和古冲沟储层预测方法等进行了研究与探讨     

应用地震方法研究九台市营城煤矿塌陷区

应用三维地震勘查方法进行煤矿塌陷区调查,既能够准确圈定采空区范围,又能够很好地解释中、浅层塌陷区分布。三维地震能够克服地质雷达、电法、地震横波等传统勘查方法勘探深度浅(一般为30 m,最多不超过50 m)的缺点,其成果对煤层在30 m以下老矿区综合治理、合理开发利用,提供准确地质资料。