Sampling and Discrete Choice Analysis

Samples used to estimate discrete choice models in geography and regional science are typically assumed to be simple random samples. This assumption is not always met with existing samples. Furthermore, data collection is usually less costly if a stratified sampling strategy is adopted. Existing sampling theory suggests that stratified sampling can affect the consistency of parameter estimates. This paper reviews the salient points of this theory and relates theory to practice by means of a simple example on housing choice by elderly.     

甚高频时岩石介电常数的测试方法和特性

本文讨论20-200MHz频率范围内平行板电容法测量岩石介电常数和电导率的方法,指出常用的静电场公式的局限性,给出较精确的似稳场动态公式,并讨论20-50MHz频率范围内的岩石介电特性。     

Three-dimensional petrographical investigations on borehole rock samples: a comparison between X-ray computed- and neutron tomography

Technical difficulties associated with excavation works in tectonized geological settings are frequent. They comprise instantaneous and/or delayed convergence, sudden collapse of gallery roof and/or walls, outpouring of fault-filling materials and water inflows. These phenomena have a negative impact on construction sites and their safety. In order to optimize project success, preliminary studies on the reliability of rock material found on site are needed. This implies in situ investigations (surface mapping, prospective drilling, waterflow survey, etc.) as well as laboratory investigations on rock samples (permeability determination, moisture and water content, mineralogy, petrography, geochemistry, mechanical deformation tests, etc.). A set of multiple parameters are then recorded which permit better insight on site conditions and probable behavior during excavation. Because rock formations are by nature heterogeneous, many uncertainties remain when extrapolating large-scale behavior of the rock mass from analyses of samples order of magnitudes smaller. Indirect large-scale field investigations (e.g. geophysical prospecting) could help to better constrain the relationships between lithologies at depth. At a much smaller scale, indirect analytical methods are becoming more widely used for material investigations. We discuss in this paper X-ray computed tomography (XRCT) and neutron tomography (NT), showing promising results for 3D petrographical investigations of the internal structure of opaque materials. Both techniques record contrasts inside a sample, which can be interpreted and quantified in terms of heterogeneity. This approach has the advantage of combining genetic parameters (physico-chemical rock composition) with geometric parameters resulting from alteration or deformation processes (texture and structure). A critical analysis of such 3D analyses together with the results of mechanical tests could improve predictions of short- and long-term behavior of a rock unit. Indirect methods have the advantage of being non-destructive. However, as it is the case with large-scale geophysical surveying, XRCT and NT are affected by several error factors inherent to the interaction of a radiation modality (X-ray or neutron beam) with the atomic structure of the investigated materials. Recorded signals are therefore in particular cases not artifact-free and need to be corrected in a subsequent stage of data processing.     

原子荧光光谱分析环境样品中砷锑铋汞易出现的问题及解决方法

针对原子荧光光谱法测试砷锑铋汞中易出现的仪器空白不稳定、样品制备及仪器污染等问题，总结出相应的解决方法。     

利用卫星ETM与样方统计数据研究西鄂尔多斯珍稀濒危植物种群分布规律

使用1999年8月30m分辨率的ETM遥感数据、DEM数据和25个典型的4^4m^2的地面实测样方统计数据、数字化了1994年的珍稀淑危植物分布图，用遥感技术西鄂尔多斯珍稀濒危植物群落进行了水平和垂直带分布规律的研究。图像处理采用遥感弱信息提取技术，识别了建群植物及其种群组合特征；并结合三维景观影像对珍稀植物种群生存生境的地貌、土壤等条件的相关性进行了分析，揭示了垂直、水平地带分异规律，建立了相关分析模型。研究结果为珍稀濒危植物动态监测和物种多样性保护提供了新的技术方法和分析决策依据。     

用离子色谱法测定金矿区水样中常规无机离子

利用DX－120离子色谱仪进行阴阳离子的精密度和准确度测定，100mg/L时相对标准偏差范围为1．00％－3．80％，回收经95．83％－105．00％；5mg／L时相对标准偏差范围为1．18％－4．57％，回收率92．40％－103．20％，完全达到实际要求。用该离子色谱仪测定甘肃阳山金矿山水样中常规无机离子，数据表明该区域水质较好，所测离子浓度都未超过饮用水标准。     

岩石矿物及粉尘中游离二氧化硅的测定

改进了游离二氧化硅（fSiO2)测定中试样的分解方法，采用硫－磷混酸替代单独使用磷酸分解试样，防止了焦磷酸盐的形成，同时，氟硼酸对fSiO2的溶解率符合测定要求。改进的方法用于标准物质中fSiO2的测定，结果与标准值或磷酸溶矿重量法相符。对于ω(fSiO2)=3.26%的标样10次测定的RSD为2．4％。     

如何控制数字地下地形图的空间占用

数字地形图的数据量的大小不但取决于采点密谋，而且也受AUTOCAD中的某些操作的影响。     

远场和超远场前兆的模拟实验研究

在岩石试件、传压块体（包括岩石和钢块）和压机架上布设应变观测点，观测研究它们在岩石试样破裂孕育过程中的变化特征。结果发现，岩样临破坏前除岩样上各个测点都出现异常变化外，同时较远处的测力元件、传压块体和压机架上的应变也出现了突变或扰动前兆异常。岩石试样外部测点的应变特征变化在极临近主破裂时才有反映。而岩样上的测点除极临近主破裂时有突变和扰动外在离主破裂较早时已有反映。岩石试样外的测点距岩样约25－90cm，约为破裂尺度的3－10（多）倍。这表明在孕震区以外很远的地方都可能出现前兆异常。并初步探讨了形成远场前兆的原因。     

随机-模糊处理方法在岩石力学指标统计及岩组划分中的应用

探讨了随机 模糊处理方法在岩石力学指标统计和岩组定量划分中的应用。文中对计算中的隶属函数取值及迭代方式进行了深入讨论。通过计算结果的比较分析, 认为随机 模糊处理方法更符合实际, 并优于其他方法。最后作者提出了岩组定性划分 岩石样本参数的随机 模糊统计分析 岩组定量划分及参数重新统计的分析程序。