基于SiC器件的三电平半桥单电感均压电路

针对辅助变流器中充电机输入端支撑电容电压不均衡导致变压器出现磁饱和的问题,研究一种基于Si C MOSFET器件的单电感均压电路。对单电感均压电路的4种工作模态进行分析,通过两个开关管的互补导通,利用电感实现能量在支撑电容之间的重新分配,可实现支撑电容电压的均衡。对单电感均压电路的3种典型开关状态类型进行分析,并根据其开关状态类型计算单电感均压电路电感选取范围。仿真和小功率实验结果表明单电感均压电路具有较强的均压能力。     

Stereocomplex Crystallization Induced Significant Improvement in Transparency and Stiffness–Toughness Performance of Core-Shell Rubber Nanoparticles Toughened Poly(l-lactide) Blends

Toughening modification of poly(l -lactide) (PLLA) with rubber particles is often realized at the cost of transparency, mechanical strength, and modulus because high rubber loadings are generally required for toughening. In this work, a promising strategy to simultaneously improve the transparency and stiffness–toughness performance of poly(butyl acrylate)-poly(methyl methacrylate) (BAMMA) core-shell rubber nanoparticles toughened PLLA blends by utilizing the stereocomplex (SC) crystallization between PLLA and poly(d -lactide) (PDLA) is devised. The results reveal that the construction of SC crystallites in PLLA matrix via melt-mixing PLLA/BAMMA blends with PDLA can prevent BAMMA nanoparticles from aggregation and promote them to form network-like structure at lower contents. As a result, not only higher toughening efficiency with less rubber contents but also superior transparency is achieved in the PLLA/PDLA/BAMMA blends as compared with the PLLA/BAMMA ones where large aggregated BAMMA clusters are formed. Moreover, the outstanding reinforcement of SC crystallites network for PLLA can impart an enhanced tensile strength and modulus to PLLA/PDLA/BAMMA blends, thus improving the stiffness–toughness performance of PLLA/PDLA/BAMMA blends to a higher degree. This work demonstrates that SC crystallization is a promising solution to solve the contradiction between transparency and mechanical properties and then obtain superior comprehensive performances in rubber toughened PLLA blends.     

新钢基于多元数据采集的电弧炉炼钢过程能量监控系统

电弧炉炼钢过程中能量多元且复杂,采用单一的数据采集方式不能满足对电弧炉炼钢过程各工序能量构成分析要求。通过多元数据采集方式,准确采集电弧炉炼钢过程各工序实际生产数据,并使用Visual Studio 2013、Microsoft SQL Server 2012数据库等软件建立电弧炉炼钢过程能量监控系统。该系统通过实时动态采集到的电弧炉炼钢过程各项冶炼数据,量化电弧炉炼钢过程各工序能量,实现电弧炉炼钢过程能量监控;对电弧炉炼钢过程各工序能量消耗、能量流动、能量利用等方面进行分析,为电弧炉生产过程能量高效利用提供理论依据。     

余热利用供热系统蒸汽负荷平衡调节方案选择

阐述了在余热利用区域的供热系统中 ,蒸汽负荷平衡调节的措施、特点及方案选择。通过工程方案选择的实例 ,指出调节好余热源设备生产出的蒸汽平衡 ,与余热利用同等重要。     

Sn-Ag-Cu-Ce无铅钎料合金体系的热力学计算及预测

利用周模型对Sn—Ag—Cu—Ce无铅钎料合金体系进行了热力学计算预测。热力学计算结果表明，Ag、Cu含量(质量分数)分别为0．5％-4．5％时，当Ce的含量(质量分数)超过0．05％时，体系达到化学平衡状态；当Ce的含量(质量分数)达到0．6％左右时，Sn、Ag、Cu分别都出现了“等活度系数”现象。这一研究结果可为无铅钎料合金的成分设计提供理论指导。     

Phosphorus content in soil, uptake by plants and balance in three European long-term field experiments

The fate of phosphorus (P) derived from mineral fertilisers and organic manures, and the effective P balance, have been assessed in three long-term field experiments at Rothamsted (UK), Bad Lauchstaedt (Germany) and Skierniewice (Poland). This paper discusses the plant availability, uptake and overall utilisation of P over the last 30 years, based on soil test P availability indices and crop analyses determined by the standard methods used in each of the three countries. The data suggest that differences in soil type significantly influence the dynamics of P at the three locations, but most significantly between a loess Chernozem at Bad Lauchstaedt with a high organic matter content and the soils at the other two locations which have a low organic matter content. The application of P either as inorganic fertiliser or organic manure had a considerable influence on the availablity, uptake, leaching or fixing of P, but the crop recovery rate of P from mineral fertiliser did not exceed 35% with the smallest recovery (average 18%) occurring in the soil with the highest clay content at Rothamsted. At Bad Lauchstaedt and Rothamsted the most efficient utilisation of P (averages of 47% and 37%, respectively) was from soils treated with farmyard manure (FYM), with the greater quantity of P either leached or fixed (8 and 25 kg ha^-1 y^-1, respectively) occurring in soils treated with superphosphate. At Skierniewice, however, the reverse was true. Overall, the most efficient crop utilisation from mineral P (30% average) was from the loamy sand at Skierniewice. P balances for the three locations show that quantitatively, for the same P input, the amount of P either leached from or fixed in the plough layer of Broadbalk field, Rothamsted, was 2–3 times greater than at Skierniewice and 3–6 times greater than at Bad Lauchstaedt. The results suggest that differences in the soil physico-chemical properties, climate, the availability of other major nutrients, and the form in which P is applied, all influence the effectiveness of P fertilisation and P balance. The investigation highlights the importance of maintaining long-term field experiments and archived soil and crop samples on a world-wide basis for understanding nutrient cycling and fertility dynamics.     

MES在聚氯乙烯生产中的应用

介绍了MES在聚氯乙烯生产中乙炔站、氯乙烯、聚合各工序的生产平衡、实时参数及关联参数优化、辅助材料的核算等应用情况。     

Has water-saving irrigation recovered groundwater in the Hebei Province plains of China?

This study performed a quantitative evaluation of the impact of water-saving irrigation on the groundwater regime in the Hebei Province plains area. In this work, the change in groundwater regime and the contributions of precipitation and water-saving irrigation development were investigated. The results indicate that the groundwater overdraft has been mitigated to some extent, mainly due to changes in precipitation and the implementation of water-saving irrigation, with contributions of 64.3% and 35.7%, respectively, when considering only these two factors. Water-saving irrigation is accepted as an important means for reducing groundwater depletion, but should be used in conjunction with other measures.     

塔式旋转混凝土布料机的工况计算及配重调控分析

塔式旋转混凝土布料机是一种可高效输送混凝土的工程机械,被广泛用于混凝土浇筑。施工过程中,为减小其布料端悬臂力矩、保证其塔架的稳定性,需要随时根据其伸缩桁架的伸缩量来调节其配重块的位置。运用有限元ANSYS软件,分析了布料机在极限工况条件下的结构强度和最大合力矩,计算了19种不同工况下力矩、桁架伸缩量及配重调节距离之间的数值关系。在此基础上,利用MATLAB的拟合优化功能得出三者之间的函数关系并绘制三维曲线。研究结果为塔式旋转混凝土布料机的安全运行提供数据支持,同时为其后续的优化设计提供参考。     

Dynamics in input and output coefficients for land use studies: a case study for nitrogen in crop rotations

Increasingly, model-based approaches play a role in the design and development of new land use systems. Simulation modeling may play a role in the generation of land use systems for land units, and optimization modeling (e.g. linear programming – LP) may be used in the upscaling to farm and region. In the quantification of new land use systems for land units, often equilibrium conditions with respect to soil resources are assumed, following a so-called target-oriented approach. This facilitates ex ante computation of inputs and emissions of nutrients and allows their use in static optimization models based on LP. The condition of equilibrium in soil resources is often not met, nor is it the ultimate aim. Hence, the dynamics in new systems are insufficiently dealt with. This paper presents an approach for the design of land use systems (crop rotations) and their quantification in terms of input and output coefficients, using particular yields and dynamics in soil resources as targets. Interactions between N input and output of succeeding crops are explicitly taken into account. A simple N-balance model is used describing major processes affecting soil N-dynamics. For the Koutiala region in Mali five crop rotations are evaluated that differ in target crop yield, crop choice, crop residue management and external N source. Modeled crop rotations aiming at high yields, in combination with incorporation of crop residues and legumes, result in depletion of soil N stock. Only in crop rotations aiming at high yields and with incorporation of crop residues combined with a supply of large quantities of animal manure, soil N depletion can be prevented. Four approaches are presented of how to use the dynamic input–output coefficients of these systems in land use studies using LP: (i) use of average coefficients, (ii) use of discounted coefficients, (iii) use of pessimistic estimates of coefficients in an optimization of the land use allocation followed by a recalculation of the objective values for the optimized land use with optimistic coefficients, and (iv) a combined use of systems characteristics, i.e. cumulative N-inputs of land use systems over the time horizon and the magnitude of the soil N pool at the end of the time horizon, which can be used as filters for land use systems. Though none of the approaches completely captures the dynamics in input–output coefficients, they enable a well-founded consideration of the consequences of dynamics in, for instance, soil N stocks in static optimization approaches for farm and regional studies.