用过滤工艺全面提高铸锭质量

探讨了过滤器孔径对6063铝合金铸锭组织和性能的影响规律。在此基础上指出,在过滤工艺恰当时,不仅可以减少铸锭中的夹杂物,而且可以有效地防止裂纹、羽毛晶等连续铸锭中的常见缺陷。     

RS高强Al－Zn－Mg－Cu系合金热处理温度与性能的关系

本文系统研究了ＲＳ高强Ａｌ－Ｚｎ－Ｍｇ－Ｃｕ系合金淬火温度、时效温度与性能关系，同时还分析了合金的微观组织。试验得出在４７０℃淬火峰时效（Ｔ６）的拉伸性能达到σ_ｂ＝７４０ＭＰａ，σ_（０．２）＝７０２ＭＰａ，δ_５＝１０％；双级时（Ｔ７３）可获得σ_ｂ＝６３３ＭＰａ，σ_（０．２）＝６０６ＭＰａ，δ_５＝１１．５％。合金的弥散强化相是Ｃｏ_２Ｎ_９、Ａｌ_３Ｚｒ，沉淀强化相为ＧＰ区、η＇和η。     

铝电解槽料箱排气管结构的优化改造

简要介绍了铝电解槽料箱排气管在原设计上存在的缺陷和不足，针对缺陷产生的原因进行了结构优化改造。     

Plasma Discharge Initiation of Explosives in Rock Blasting Application： A Case Study

A plasma discharge initiation system for the explosive volumetric combustion charge was designed, investigated and developed for practical application. Laboratory scale experiments were carried out before conducting the large scale field tests. The resultant explosions gave rise to less noise, insignificant seismic vibrations and good specific explosive consumption for rock blasting. Importantly, the technique was found to be safe and environmentally friendly.     

无线传输有线接入钻井数据库管理系统

本文详细的介绍了无线传输有线接入钻井数据库管理系统的设计和实现过程,同时对系统体系研制思路及关键技术,数据库系统结构、功能及特点等进行了阐述。通过应用该钻井数据库管理系统,管理者能够迅速、准确、全面、及时地掌握全油田钻井生产状况和钻井生产系统内部的钻井生产物料、资金等的使用情况,以便增强钻井生产系统的应变能力,提高钻井生产管理水平,从整体上提高全油田生产效率、生产资金的利用率,达到提高经营效益的目的。     

大截面导线一牵二张力架线的要点及措施

利用现有的牵张设备和工器具，在三峡至广东500kV直流输电线路工程中，分两次一牵二张力展放大截面导线（ACSR-720／50）。这种施工工艺，在紧线及附件安装过程中采取的不同于以往的措施，起到了很好的效果，既安全可靠，又节约一次性投资。     

Corrosion Control by water‐soluble extracts from leaves of economic plants

Water extracts from leaves of date palm, phoenix dactylifera, henna, Lawsonia inermis, and corn, Zea mays, were tested as corrosion inhibitors for steel, aluminum, copper and brass in acid chloride and sodium hydroxide solutions using weight loss, solution analysis and potential measurements. The inhibition action was found to critically depend on metal type and solution composition. Only, date palm and henna extracts were found highly effective in reducing corrosion rate of steel in acid chloride solutions and aluminum in sodium hydroxide solutions. The inhibition efficiency increased with increasing the concentration of the extract. The inhibition was interpreted in terms of chemisorption of some active ingredients in the leaves according to Temkin isotherm.     

Quantitative assessment of preferential fatigue initiation sites in a multi‐phase aluminium alloy

Complex multi‐phase Al–Sn–Si alloys are commonly employed in the manufacture of small automotive plain bearings. The fundamental fatigue initiation behaviour of this class of alloys is currently not well understood. A range of analytical techniques were applied to investigate preferential initiation site location and to attempt to identify critical microstructural features. It was apparent from experimental studies that points of fatigue crack initiation are associated with the Si secondary phase. Using tessellation approaches and subsequently both adaptive numerical modelling and micro‐scale finite element modelling allowed the identification of features affecting the probability that a given Si phase would initiate a fatigue crack.     

对ADSL接入方式铜缆可用线对率的分析

指出了为发展ADSL而提高市话音频铜线电缆的传输质量和维护水平的必要性,分析了铜线电缆线对有关指标参数低劣的原因和对传输ADSL的影响,并提出了一些改进的意见。     

全新设计的光缆钢丝铠装高速成缆机

主要介绍新型光缆钢丝铠装高速成缆机的总体设计、布局、参数、结构特点。