高吸水树脂的制备、应用及发展前景

介绍了部分高吸水树脂的制备、特性、应用及发展前景。     

植物油多元醇的研究进展

介绍了植物油的组成和植物油多元醇的合成原理,综述了国内外植物油多元醇的合成及在聚氨酯领域中的应用和工业化生产情况.重点介绍了美国堪萨斯聚合物研究中心的植物油多元醇的研究进展,以及USSC,Maskimi,InterMed和陶氏等公司的工业化生产情况及其产品的性能.     

Separation of 1,3-propanediol from glycerol-based fermentations of Klebsiella pneumoniae by alcohol precipitation and dilution crystallization

The separation of 1,3-propanediol from the glycerol-based fermentation broth of Klebsiella pneumoniae plays an important role during the microbial production of 1,3-propanediol. In this paper, the separation of 1,3-propanediol from fermentative broth by a combination of ultrafiltration and alcohol dilution crystallization was investigated. The broth was first filtered by ultrafiltration, and 99% of cells, 89.4% of proteins and 69% of nucleic acids were removed. The obtained broth was further condensed by vacuum distillation, and then alcohol was added. The macromolecular impurities, such as nucleic acids, polysaccharides and proteins, were precipitated, and inorganic and organic salts were crystallized. The optimal volume ratio of alcohol added to the condensed fermentation broth was determined to be 2:1. As a result, proteins, nucleic acids and electric conductivity decreased by 97.4%, 89.7% and 95.8%, respectively, compared with the fermentative broth. The influences of pH and water content in condensed broth on alcohol precipitation and dilution crystallization were also investigated. The experimental results indicated that alcohol precipitation and dilution crystallization was feasible and effective for the separation of 1,3-propanediol from actual fermentation broth. Translated from The Chinese Journal of Process Engineering, 2006, 6(3): 454–457 [译自: 过程工程学报]     

分子筛改性包覆层及与推进剂黏结机理初探

将分子筛添加于包覆层中,可显著提高包覆层的综合性能。从分子筛的结构特点,包括其大的比表面积和表面活泼的硅羟基等方面探讨了分子筛改性丁羟包覆层及其与硝酸酯增塑聚醚(NEPE)推进剂黏结性能提高的机理,发现分子筛改善包覆层的性能与其自身结构特点密切相关。     

超临界CO2GAS沉析HMX制细过程的影响因素

研究了超临界CO2GAS沉析丙酮溶液中HMX的过程压力、温度、溶液初始浓度和溶液的膨胀速度及影响晶体粒度的因素。结果表明，压力增加，沉析颗粒的平均粒度减小；温度控制沉析晶体的晶型，对颗粒度的影响相对较小，温度增加，沉析平均粒度略有增加；溶液初始浓度对平均粒度的影响相对较大，膨胀速度亦是影响粒度及其分布的一个因素。快速膨胀溶液．并使过饱和度足够大，使过饱和度主要消耗在成核上，可得到颗粒小、分布窄的HMX颗粒。     

对-羟基苯海因生产过程中含酚废水的处理

用蒸馏—萃取—大孔树脂吸附的工艺处理化学—酶法生产D 对 羟基苯甘氨酸过程产生的含酚废水 ,苯酚回收率接近 10 0 % ,每 2t废水可回收苯酚 16 0kg ,稀盐酸 170 0kg。蒸馏后的母液套用于对 羟基苯海因 (HPH)的合成 ,可使其收率提高 10 % ,回收得到的酚钠可用于合成     

Deterministic transmission of an arbitrary single-photon polarization state through bit-flip error channel

We present two error-tolerance transmission protocols of a single-photon polarization state when bit-flip error is taken into account. For achieving the transmission target of the single-photon state, the first protocol needs to encode it to a nonmaximally entangled Bell state. Exploiting the interaction of the polarization entanglement with spatial entanglement between two photons, its success probability is 100 %. Different from the first protocol, the second one utilizes the idea of teleportation with an auxiliary Bell state. By performing quantum nondemolition measurement to analyze the parity, conventional measurement, and unitary transformation operations, the success probability of the second protocol is approximately unity. Furthermore, the second protocol can be generalized to the error-tolerance transmission of an arbitrary mixed state or the distribution of an arbitrary multi-photon entangled state.     

钛系催化剂陈化方式和条件对合成高乙烯基聚丁二烯橡胶的影响

本工艺以Ti(OC4H9)4-Al(i-C4H9)3为催化剂合成乙烯基聚丁二烯，采用催化剂陈化方式，考察了陈化温度和时间等条件对聚合的影响。结果表明，本体系高温陈化后可提高催化活性，降低Al用量；Ti－Bd－Al三元陈化的催化活性高于Ti－Al二元陈化；最佳陈化条件为n（Ti）：n（Bd）：n（Al）＝1：20：20，70℃陈化1h；与未陈化和低温陈化聚合的产物相比，高温陈化产品的分子量和1，2－结构含量较高，凝胶含量较低。     

传热设备自动清洗纽带的开孔结构优化研究

对设有开孔结构的自转清洗纽带进行了传热特性及流阻特性研究。结构优化试验的结果表明 :摩擦阻力和传热强化都随开孔面积比率的增大表现出先上升后下降的趋势 ,传热强化的幅度在 2 %— 18%之间 ,摩擦阻力系数在开孔率 18%时最大 ,其中 7#开孔比率纽带的综合性能最佳。因此 ,这种开孔结构的纽带更宜用于中低Re工况下应用 ,在 2 .0m/s以上的高流速工况下应采用高开孔率结构的纽带或螺旋带