Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.     

Electrical and electroluminescent properties of poly(p-phenylene vinylene) LB films based LEDs using aluminum metal as the electrode

The electrical properties of poly(p-phenylene vinylene) (PPV) Langmuir-Blodgett (LB) films were investigated, wherein transparent indium-tin oxide (ITO) and aluminum (Al) were used as the electrodes. Their I–V characteristics depended strongly on the thickness of PPV LB film, and the electric conductivity of the PPV LB film was in the range of 10⁻²–10⁻¹⁵ (S/cm). Their C–V characteristics showed that the capacitance was reversibly proportional to the thickness of PPV LB film and was kept constant when the applied voltage changed from −1.0 V to +1.0 V. These results indicated that PPV LB film was an insulator in this range of applied voltage without doping. Under forward bias, yellow-green light emission was observed in PPV LB film based light emitting diodes (LEDs), the highest light emission reached more than 100 cd/m² in the case that PPV LB film was deposited for 80 layers, i.e. a ITO/PPV(80L)/Al device.     

The development of pivot bearing with multiple degrees of freedom: 1st report: Prototype of pivot bearing with two degrees of freedom

This paper deals with the prototype of a new pivot bearing having two degrees of freedom. The idea of the pivot bearing is based on a continuous velocity joint (CVJ). The experimental axial stiffness and contact pressure are compared with those determined by theoretical analysis. Then, it is confirmed that the pivot bearing swings smoothly with a range of ±25°. Furthermore, the stiffness of the bearing increases as the swinging angle becomes larger. Therefore, this newly developed pivot bearing may be applied to a parallel mechanism, a joint of robot and so on.     

Highly Reproducible and Regulated Conductance Quantization in a Polymer‐Based Atomic Switch

A detailed understanding of the conductance quantization and resistive switching phenomena in redox‐based memories is crucial for realizing atomic‐scale memory devices and for finding the adequate design principles on which they can be based. Here, the emergence of quantized conductance states and their correlation with resistive switching characteristics in polymer‐based atomic switches are investigated using combinations of current–voltage measurements and first‐principles density functional theory (DFT) simulations. Various conductance states, including integer and half‐integer multiples of a single atomic point contact and fractional conductance variations, are observed in an Ag/polyethylene oxide/Pt device under sweeping of bias voltage. Moreover, highly controllable and reproducible quantized conductance behaviors by tuning the voltage sweep rate and the sweep voltage range, suggesting well‐controlled formation of the atomic point contact, are demonstrated. The device also exhibits longer retention times for higher conductance states. The DFT simulations reveal the transmission eigenstate of geometrically optimized atomic point contact structures and the impact of the atomic configurations and structural stability on the conductance state, which also explains their resistive switching behaviors. The well‐defined, multiple quantized conductance states observed in these polymer‐based atomic switches show promise for the development of new multilevel memory devices.     

Evaluation of both image resolution and contrast-to-noise ratio in scanning electron microscopy

The contrast-to-gradient (CG) resolution has been defined as a weighted harmonic mean of the local resolution, i.e. the length defining the object's local fine structure at each pixel position. The newly defined resolution Res is defined as 2 sigma/ sqrt 2, where 2 sigma is a sharpness factor of the image pattern obtained by the conversion 2 sigma = ARCG + B using default constants A and B. In the present study, we have extended the algorithm to change the constants from default values to calibrated ones using standard images that are same in both pattern and contrast-to-noise ratio (CNR) as the original SEM image to be evaluated. The calibrated image resolution with a weak noise dependency is evaluated with the CNR as a given parameter.     

Simulation study on image contrast and spatial resolution in helium ion microscope

We performed Monte Carlo simulation of helium (He) ion induced secondary electron (SE) emission in order to compare the secondary electron image characteristics between He and gallium (Ga) scanning ion microscopes (SIM) and scanning electron microscope (SEM). For 10-50 keV He ion bombardment SE yield increases gradually with increasing the atomic number, Z2, of the target, as well as for the electron bombardment. However, for 30 keV Ga ion bombardment, SE yield shows an opposite Z2 dependence. The calculated SE yield is much larger than that for both electron and Ga ion bombardment. The incident angle dependence of the SE yield approximately obeys the inverse cosine law even at high angles of 85 degrees and more. On the other hand, for electron bombardment, the incident angle dependences are much weaker for low energy and high Z2. These indicate that the image contrast on He-SIM is clearer than those of SEM. Among the electron excitations by incident He ions, recoiled target atoms and excited electrons, the first one having narrow excitation volume dominates the SE yield, so that the spatial image resolution in SIM using zero-diameter He beams with the energies of 10-50 keV is prospected to be smaller or better (<0.1 nm) than for 30 keV Ga ion and 1 keV electron beams.     

Calculating optimal modulation periods to maximize the peak capacity in two-dimensional HPLC

Theoretical calculations are presented to optimize modulation period for maximum total peak capacity in comprehensive two-dimensional HPLC (2D-HPLC) taking into account the effect of modulation on the apparent peak capacity of the first-dimension (1D) separation. Results indicate that modulation periods are most favorable when they are adjusted to approximately 2.2-4 times the standard deviation of a 1D peak in order to avoid excessively short run times at the second dimension (2D). Data are presented that effective peak capacities of several thousand in 60 min can be expected for practical 2D-HPLC conditions, utilizing 1D gradient elution followed by 2D isocratic elution, that remain at approximately 50-70% of the theoretical maximum peak capacity. This work suggests that lower modulation frequencies and longer 2D separation times than previously proposed are favorable under realistic chromatographic conditions, alleviating some practical problems associated with 2D-HPLC.     

Immunoassay on a power-free microchip with laminar flow-assisted dendritic amplification

We demonstrate a rapid (<30 min) and ultrasensitive (sub-picomolar) immunoassay on a microchip which needs no external power sources for fluid transport. We previously reported a rapid immunoassay of human C-reactive protein (CRP) on the power-free microchip with moderate sensitivity, i.e., a limit of detection (LOD) in sub-nanomolar range, due to the lack of signal amplification. In the current work, we have improved the LOD by 3 orders of magnitude by employing dendritic amplification (DA) methods. Specifically, a sandwich immunocomplex with a biotinylated secondary antibody was constructed on the inner surface of the microchannel as described in the previous report. Onto the immunocomplex, solutions of FITC-labeled streptavidin (F-SA) and biotinylated anti-streptavidin (B-anti-SA) were supplied to grow a dendritic structure. First, we alternately supplied the two solutions for layer-by-layer growth up to three layers. As a result, we obtained an LOD of 0.21 pM with a CRP sample volume of 1.0 microL and assay time of approximately 30 min under an ordinary fluorescence microscope. Second, to reduce the number of incubation steps, we have devised a new DA method: laminar flow-assisted dendritic amplification (LFDA). In this method, F-SA and B-anti-SA were simultaneously and continuously supplied from two laminar streams formed by a Y-shaped microchannel. The immunoassay with the LFDA for 10 min (total assay time of approximately 23 min) with a CRP sample volume of 0.5 microL yielded an LOD of 0.15 pM, which is equivalent to 75 zmol. The combination of the power-free microchip and the LFDA will provide a new opportunity for ultrasensitive point-of-care testing.     

Electrochemical reduction of carbon dioxide to ethylene with high Faradaic efficiency at a Cu electrode in CsOH/methanol

The electrochemical reduction of CO₂ with a Cu electrode in CsOH/methanol-based electrolyte was investigated. The main products from CO₂ were methane, ethylene, ethane, carbon monoxide and formic acid. A maximum Faradaic efficiency of ethylene was 32.3% at −3.5 V vs. Ag/AgCl saturated KCl. The best methane formation efficiency was 8.3% at −4.0 V. The ethylene/methane current efficiency ratio was in the range 2.9–7.9. In the CsOH/methanol, the efficiency of hydrogen formation, being a competitive reaction against CO₂ reduction, was depressed to below 23%.     

Measurement of electric intensity distribution inside human cadaver cochlea for multichannel cochlear implants

We have proposed a Tripolar Electrode Stimulation Method (TESM) which may succeed in narrowing the stimulation region and continuously moving the stimulation site for cochlear implants. The TESM stimulates the auditory nerve array through lymphatic fluid by means of three adjacent electrodes selected from among an electrode array. Currents are emitted from the electrodes on each side and the central electrode receives them. The current received by the latter electrode is equal to the sum of the currents emitted from the electrodes on the two sides. In this paper, the electric intensity profiles produced by the TESM and by monopolar stimulation were measured in a human cadaver cochlea and in a saline solution. We found that in the TESM, the electric intensity profile produced in the human cadaver cochlea was about the same as that in the saline solution. In addition, in the TESM, the electric intensity profile was much sharper than that of monopolar stimulation in the human cadaver cochlea. Furthermore, the nervous excitation region could be localized in a certain range by means of TESM. © 1999 Scripta Technica, Electr Eng Jpn, 129(1): 1–9, 1999