State estimation for high-dimensional chemical processes

The application of conventional observer designs for high-dimensional systems may not always be practical due to high computational requirements or the resulting observers being too sensitive to measurement noise. In order to address these issues, this paper presents two observer design techniques for state estimation of high-dimensional chemical processes. One technique is used for systems with inputs, whereas the other one is specifically geared towards systems that are not excited from the outside. Both of these observers are applicable to linear and with a modification to non-linear systems.The main idea behind the presented observer designs is that a reduced-order observer is implemented instead of a conventional state estimator. The motivation is that subspaces, which are close to being unobservable, cannot be correctly reconstructed in a realistic setting due to measurement noise and inaccuracies in the model. The presented approaches make use of this observation and only reconstruct the parts of the system where accurate state estimation is possible. The observer designs are illustrated on a 30-tray distillation column model. Additionally, it has been shown that the location of process measurements has a major effect on the performance of the presented reduced-order observers.     

Impact of processing conditions and sizing on the thermomechanical and morphological properties of polypropylene/carbon fiber composites fabricated by material extrusion additive manufacturing

For the 3D printed composites, fiber alignment is affected by the direction of melt-flow during extrusion of filaments and subsequently through the printing nozzle. The resulting fibers orientation and the fiber-matrix compatibility have a direct correlation with mechanical properties. This study investigates the impact of processing conditions on the state of the carbon fiber types and their orientation on the mechanical properties of 3D-printed composites. Short and long carbon fibers were used as starting reinforcing materials, and the state of fibers at the beginning and on the printed parts were evaluated. Strong anisotropy in terms of mechanical properties (flexural and impact properties) was observed for the samples printed with different printing orientations. Interestingly, the number of voids in the printed composites was found to be correlated with the fiber types. The present work provides a step towards the optimization of tailored composite properties by additive manufacturing.     

Characterization of weld seam properties of extruded magnesium hollow profiles

Extrusions of hollow profiles with weld seams were conducted using the magnesium alloy ME21 applying various extrusion ratios. Subsequent analysis of the profiles’ microstructure was performed comparing weld free with weld seam containing material using (polarized) light optical microscopy (LOM). Additionally, the local texture and microstructure in the weld-free material as well as in the weld seam region has been examined with a scanning electron microscope coupled with electron backscatter diffraction technique (SEM-EBSD). The weld-free material and the weld seam are characterized by recrystallized microstructures, whereas few residual cast grains were identified. The local texture distinctively changes from the weld-free material to the weld seam. The texture of the weld-free material is comparable with the typical ME21 sheet texture. In the weld seam area, a pole density is found, which is distributed towards the transverse direction (TD) combined with a split and broadening of the pole density in the extrusion direction (ED). This texture influences the mechanical anisotropy due to the dependence of the activation of basal 〈a〉-slip and \( \{ 10\bar{1}2\} \;\langle 10\bar{1}1\rangle \)-extension twinning on the loading direction in favorably oriented grains.     

Dynamic optimal experimental design yields marginal improvement over steady‐state results for computational maximisation of regulatory T‐cell induction in ex vivo culture

The isolation of T cells, followed by differentiation into Regulatory T cells (Tregs), and re‐transplantation into the body has been proposed as a therapeutic option for inflammatory bowel disease. A key requirement for making this a viable therapeutic option is the generation of a large population of Tregs. However, cytokines in the local microenvironment can impact the yield of Tregs during differentiation. As such, experimental design is an essential part of evaluating the importance of different cytokine concentrations for Treg differentiation. However, currently only single, constant concentrations of the cytokines have been investigated. This work addresses this point by performing experimental design in silico which seeks to maximize the predicted induction of Tregs relative to Th17 cells, by selecting an optimal input function for the concentrations of TGF‐β, IL‐2, IL‐6, and IL‐23. While this approach sounds promising, the results show that only marginal improvements in the concentration of Tregs can be achieved for dynamic cytokine profiles as compared to optimal constant concentrations. Since constant concentrations are easier to implement in experiments, it is recommended for this particular system to keep the concentrations constant where IL‐6 should be kept low and high concentrations of TGF‐β, IL‐2, and IL‐23 should be used.Inspec keywords: patient treatment, molecular biophysics, proteins, cellular biophysics, diseasesOther keywords: Tregs relative, optimal input function, dynamic cytokine profiles, optimal constant concentrations, IL‐23, computational maximisation, regulatory T‐cell induction, inflammatory bowel disease, viable therapeutic option, local microenvironment, Treg differentiation, single concentrations, predicted induction, dynamic optimal experimental design, interleukin‐2, IL‐6, transforming growth factor‐β     

Cervical pain and proprioceptive sensitivity

With the intent of estimating the proprioceptive sensitivity of the cervical rachis, the Authors subjected 17 healthy volunteers and 20 patients suffering from various cervical disorders to a clinical head positioning test, which was previously experimented upon by several french Authors was modified under certain aspects by our equipe. The test, consists in flexion and extension of the head after maximal rotations to the left and right, then repositioning the head at the starting point "0" which corresponds to the crossing point of two orthogonal axis of a target. The positions are marked on the target by a laser beam situated on the helmet worn by the subject undergoing testing. The results obtained corresponding to the errors committed regarding point "0", permit us to confirm the reliability of the test and significant definitions between the control group and the patients suffering from cervical disorders.     

The influence of design aesthetics in usability testing: Effects on user performance and perceived usability

This article examined the effects of product aesthetics on several outcome variables in usability tests. Employing a computer simulation of a mobile phone, 60 adolescents (14-17 yrs) were asked to complete a number of typical tasks of mobile phone users. Two functionally identical mobile phones were manipulated with regard to their visual appearance (highly appealing vs not appealing) to determine the influence of appearance on perceived usability, performance measures and perceived attractiveness. The results showed that participants using the highly appealing phone rated their appliance as being more usable than participants operating the unappealing model. Furthermore, the visual appearance of the phone had a positive effect on performance, leading to reduced task completion times for the attractive model. The study discusses the implications for the use of adolescents in ergonomic research.     

Ceramic micro parts produced by micro injection molding: latest developments

Powder injection molding is a preferred technology for the production of micro parts or microstructured parts. Derived from the well known thermoplastic injection molding technique it is suitable for a large-scale production of ceramic and metallic parts without final machining. To achieve good surface quality and control the part size and distortions is an important goal to allow mass production. This means that all process steps like part design adjusted for MIM/CIM-technology, appropriate choice of powder and binder components and injection molding simulation to design the sprue are required. Concerning the injection molding itself high quality mold inserts, high-precision injection molding with suitable molding machines like Battenfeld Microsystem50 or standard machine with special equipment like variotherm or evacuation of the molding tool and an adjusted debinding and sintering process have to be available. Results of producing micro parts by powder injection molding of ceramic feedstock will be presented.     

The influence of prototype fidelity and aesthetics of design in usability tests: effects on user behaviour, subjective evaluation and emotion

An empirical study examined the impact of prototype fidelity on user behaviour, subjective user evaluation and emotion. The independent factors of prototype fidelity (paper prototype, computer prototype, fully operational appliance) and aesthetics of design (high vs. moderate) were varied in a between-subjects design. The 60 participants of the experiment were asked to complete two typical tasks of mobile phone usage: sending a text message and suppressing a phone number. Both performance data and a number of subjective measures were recorded. The results suggested that task completion time may be overestimated when a computer prototype is being used. Furthermore, users appeared to compensate for deficiencies in aesthetic design by overrating the aesthetic qualities of reduced fidelity prototypes. Finally, user emotions were more positively affected by the operation of the more attractive mobile phone than by the less appealing one.