Crystallization behavior of poly(lactic acid)/elastomer blends

Differential Scanning Calorimetry (DSC) was used to evaluate the crystallization behavior of poly(lactic acid) and its blends with elastomer. It has been observed that the cold crystallization temperature of the blends decreased as the weight fraction of elastomer increased as well as the onset temperature of cold crystallization also shifted to lower temperature. In non-isothermal crystallization experiments, the crystallinity of poly(lactic acid) increased with a decrease in the heating and cooling rate. The melt crystallization of poly(lactic acid) appeared in the low cooling rate (1, 5 and 7.5 °C/min). The presence of low elastomer tends also to increase the crystallinity of poly (lactic acid). The DSC thermogram at ramp of 10 °C/min showed the maximum crystallinity of poly(lactic acid) is 36.95% with 20 wt% elastomer contents in blends. In isothermal crystallization, the cold crystallization rate increased with increasing crystallization temperature in the blends. The Avrami analysis showed that the cold crystallization was in two stages process and it was clearly seen at low temperature. The Avrami exponent (n) at first stage was varying from 1.59 to 2 which described a one-dimensional crystallization growth with homogeneous nucleation, whereas at second stage was varying from 2.09 to 2.71 which described the transitional mechanism to three dimensional crystallization growth with heterogeneous nucleation mechanism. The equilibrium melting point of poly(lactic acid) was also evaluated at 176 °C.     

Growth of cubic boron nitride films by ibad and triode sputtering: development of intrinsic stress

Two methods are employed to evidenced the stress behavior in c-BN films. On the one hand, in depth stress profile of c-BN film, deposited by ion beam assisted evaporation, was performed by recording infrared spectra and substrate curvature after reactive ion etching (RIE) steps. It shows a peak of stress up to −17 GPa in the h-BN basal layer and a stress relaxation when the cubic phase appears. On the other hand, dynamic stress profiles of c-BN films deposited by a triode sputtering system, are obtained by recording infrared spectra and substrate curvature after various c-BN deposition times, with the same experimental conditions. Likewise, a peak of stress of −12 GPa is unmistakably observed in the h-BN basal layer followed by a stress release during c-BN nucleation, where an average value of −12 GPa is observed in the c-BN film volume. These results provide a support for the stress model proposed by McKenzie even if along with a minimum stress a high level of densification of the layer is needed.     

Selective retension of active cells employing low centrifugal force at the medium change during suspension culture of Chinese hamster ovary cells producing tPA

The effect of centrifugal force applied for cell separation at the medium change on the growth, metabolism and tissue plasminogen activator (tPA) productivity of Chinese hamster ovary (CHO) cells suspension culture was investigated. The viability of the precipitated cells increased exponentially as the centrifugal force decreased. However, the cell recovery was lower than 91% when centrifugal forces applied for 5 min was less than 67 x g. In cultures incubated for 474 h with 7 medium changes employing centrifugal forces ranging from 67 to 364 x g, a centrifugal force lower than 119 x g resulted in higher specific rates of growth, glucose consumption, and lactate and tPA production during the whole culture period. On the other hand, daily centrifugation at 67 to 537 x g without discarding the supernatant had no effect on the specific rates. The cultures inoculated with cells precipitated at a centrifugal force of 67 x g showed apparently higher specific rates of metabolism compared to those inoculated with cells in the supernatant. The cells in the supernatant and the precipitate obtained following centrifugation at 67 x g have average diameters of 15.5 and 17.4 microm, respectively. The intracellular contents of amino acids, especially nonessential amino acids, of the precipitated cells were markedly higher than those of the cells in the supernatant. These results indicate that large cells with high amino acid content and metabolic activity were selectively retained in the culture by means of centrifugation at low forces such as 67 x g. Consequently, application of a low centrifugal force is recommended for medium change in order to maintain higher specific productivity of suspended mammalian cells in perfusion culture.     

Direct evidence of atmospheric secondary organic aerosol formation in forest atmosphere through heteromolecular nucleation

Atmospheric aerosols play a central role in climate and atmospheric chemistry. Organic matter frequently composes aerosol major fraction over continental areas. Reactions of natural volatile organic compounds, with atmospheric oxidants, are a key formation pathway of fine particles. The gas and particle atmospheric concentration of organic compounds directly emitted from conifer leaf epicuticular wax and of those formed through the photooxidation of alpha- and beta-pinene were simultaneously collected and measured in a conifer forest by using elaborated sampling and GC/ MS techniques. The saturation concentrations of acidic and carbonyl photooxidation products were estimated, by taking into consideration primary gas- and particle-phase organic species. Primary organic aerosol components represented an important fraction of the atmospheric gas-phase organic content Consequently, saturation concentrations of photooxidation products have been lowered facilitating new particle formation between molecules of photooxidation products and semi-volatile organic compounds. From the measured concentrations of the above-mentioned compounds, saturation concentrations (Csat,i) of alpha- and beta-pinene photooxidation products were calculated for nonideal conditions using a previously developed absorptive model. The results of these calculations indicated that primarily emitted organic species and ambient temperature play a crucial role in secondary organic aerosol formation.     

Physiological relevance of food grade microcapsules: Impact of milk protein based microcapsules on inflammation in mouse models for inflammatory bowel diseases

In order to increase beneficial effects of bioactive compounds in functional food and dietary supplements, enormous efforts are put in the technological development of microcapsules. Although these products are often tailor‐made for disease susceptible consumer, the physiological impact of microcapsule uptake on the respective target consumer has never been addressed. The present study aimed to assess the relevance of this aspect by analyzing the impact of milk protein based microcapsules on experimental inflammatory bowel disease. Long‐term feeding of sodium caseinate or rennet gel microcapsules resulted in significant alterations in the intestinal microbiota of healthy mice. In TNFΔARE/wt mice, a model for chronic ileal inflammation, rennet gel microcapsules resulted in further increased splenomegaly, whereas ileal inflammation was unchanged. In IL10^?/? mice, a model for chronic colitis, both types of microcapsules induced a local increase of the intestinal inflammation. The present study is the first to demonstrate that, independent of their cargo, microcapsules have the potential to affect the intestinal microbiota and to exert unprecedented detrimental effects on disease‐susceptible individuals. In conclusion, the impact of microcapsule uptake on the respective target consumer groups should be thoroughly investigated in advance to their commercial use in functional food or dietary supplements.     

Using symmetries in the eigenvalue method for polynomial systems

One way of solving polynomial systems of equations is by computing a Gröbner basis, setting up an eigenvalue problem and then computing the eigenvalues numerically. This so-called eigenvalue method is an excellent bridge between symbolic and numeric computation, enabling the solution of larger systems than with purely symbolic methods. We investigate the case that the system of polynomial equations has symmetries. For systems with symmetry, some matrices in the eigenvalue method turn out to have special structure. The exploitation of this special structure is the aim of this paper. For theoretical development we make use of SAGBI bases of invariant rings. Examples from applications illustrate our new approach.     

Epoxidized natural rubber/dicarboxylic acid self-vulcanized blends

Curing behaviour as well as mechanical properties of binary blends of epoxidized natural rubber (ENR) and dodecanedioic acid (DA) were investigated for development of self-vulcanizable elastomer blends. Cross-linking reaction at 180 °C of reactive functional rubber containing 25 and 10 mol% epoxide groups was followed by rheology. The properties of the cured materials were studied by dynamic mechanical analysis, stress-strain experiments, and DSC measurements. It was shown that a specific ratio ENR/DA gave rise to optimum mechanical properties. This ratio decreases together with the epoxidation level of the rubber. DSC measurements revealed that the glass transition temperature of the cured material increases nonlinearly at high concentrations of cross-linking agent. By comparing cross-linking with DA and reaction with monofunctional lauric acid, this behaviour was attributed to polar interactions due to free carboxylic groups of pending diacid grafts.