Crystallization behavior of poly(lactic acid)/elastomer blends

Differential Scanning Calorimetry (DSC) was used to evaluate the crystallization behavior of poly(lactic acid) and its blends with elastomer. It has been observed that the cold crystallization temperature of the blends decreased as the weight fraction of elastomer increased as well as the onset temperature of cold crystallization also shifted to lower temperature. In non-isothermal crystallization experiments, the crystallinity of poly(lactic acid) increased with a decrease in the heating and cooling rate. The melt crystallization of poly(lactic acid) appeared in the low cooling rate (1, 5 and 7.5 °C/min). The presence of low elastomer tends also to increase the crystallinity of poly (lactic acid). The DSC thermogram at ramp of 10 °C/min showed the maximum crystallinity of poly(lactic acid) is 36.95% with 20 wt% elastomer contents in blends. In isothermal crystallization, the cold crystallization rate increased with increasing crystallization temperature in the blends. The Avrami analysis showed that the cold crystallization was in two stages process and it was clearly seen at low temperature. The Avrami exponent (n) at first stage was varying from 1.59 to 2 which described a one-dimensional crystallization growth with homogeneous nucleation, whereas at second stage was varying from 2.09 to 2.71 which described the transitional mechanism to three dimensional crystallization growth with heterogeneous nucleation mechanism. The equilibrium melting point of poly(lactic acid) was also evaluated at 176 °C.