Optical topography: practical problems and new applications

We will briefly review the present status of optical topography and then discuss the method of improving practicality, i.e., the signal-to-noise (S/N) ratio and the spatial resolution in observations of higher-order brain functions. The optimum wavelength pair improved the S/N ratio sixfold for deoxyhemoglobin, and new configurations of light irradiation and detection positions doubled the spatial resolution. We also report on developing application fields of optical topography. This modality will bridge the gap between natural sciences, neuroscience, and pedagogy, and show actual real-time brain activity.     

Microstructure and anodic polarization behavior of experimental Ag–18Cu–15Pd–12Au alloy in aqueous sulfide solution

The anodic corrosion behavior of an experimental Ag–15Pd–18Cu–12Au alloy in 0.1% Na₂S solution in relation to its microstructure was investigated using potentiodynamic and potentiostatic polarization techniques with analyses of corrosion products by X-ray diffractometry, Auger electron spectroscopy, and X-ray photoelectron spectroscopy. The role of Pd in improvement of the corrosion resistance was also investigated. In the potential/current density curve, three distinct current peaks, at –520 mV (peak I), –425 mV (peak II) and –175 mV (peak III), were observed. The Ag-rich ₂ matrix with coarse Cu and Pd-rich lamellae was the most corrosion-susceptible region, and this region was preferentially corroded at peak I with the formation of granular deposits of Ag₂S. A small amount of Ag–Cu mixed sulfide deposited on the Cu and Pd-rich coarse particles and dissolution of Ag as AgO^– might have occurred in parallel with Ag₂S formation at peak II. Enrichment of Pd on the alloy surface occurred at peak III due to preferential dissolution of Ag and Cu. A high level of corrosion resistance was attained with the formation of a thin Pd-rich sulfide film, which enhanced the passivity of the alloy in an alkaline sulfide solution. It was found that passivity is an important phenomenon not only for base metal alloys but also for noble metal alloys to maintain high levels of resistance to corrosion and tarnishing in sulfide environments.     

Surface acoustic wave based sensors employing ionic liquid for hydrogen sulfide gas detection

This paper describes a new type hydrogen sulfide (H₂S) gas sensor using ionic liquid (IL). In this sensor, a reservoir for the IL was integrated on a surface acoustic wave (SAW) resonator. The IL serves as an absorber for H₂S gas. Mass change due to this absorption is detected as shift in the resonant frequency. In this study, we fabricated and demonstrated the sensor using the lithium niobate (LiNbO₃) SAW resonator with the resonant frequency of 38 MHz. The integrated reservoir was filled by the IL 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]-[PF₆]). As an experimental result, we observed the linear correlation between the frequency-shift and the exposure time of the sensor to the H₂S gas.     

Fast Labelling of Natural Scenes Using Enhanced Knowledge

A new technique for labelling natural scenes is proposed. This technique labels disjoint regions on an image of a natural scene on the basis of knowledge about the relationship among objects. The proposed technique consists of three stages: (1) segmentation, (2) initial labelling, and (3) label improvement. One of the most promising previous techniques uses simulated annealing to find the solution, while our technique uses local hill-climbing with enhanced knowledge for speeding up the processing. Local hill-climbing is known to be easy to be captured by a local minimum. We solved this problem by enhancing the knowledge being used as constraints for the search. Our knowledge represents 1-to-n relationships among regions, pair-wise relationships of regions, and relative locations of the regions to the image. In addition, we introduced two region features: an entropy in intensity; and a linearity of contours of each region. The linearity evaluation aims to distinguish artificial objects from natural objects. The validity of the technique is supported by some experiments. These experiments showed that the proposed technique is much faster with the almost same accurate.     

A new recovery process of carbon dioxide from alkaline carbonate solution via electrodialysis

Bipolar membrane electrodialysis is applied to CO₂ recovery from alkaline carbonate solution. CO₂ in flue gas is captured by an alkaline hydroxide absorbing solution to form an alkaline carbonate solution. The captured CO₂ is recovered from the alkaline carbonate solution via bipolar membrane electrodialysis, and the alkaline solution is regenerated simultaneously. To reduce the power requirement for CO₂ recovery, this study considers optimal design and operation. Three membrane arrangements were compared, and the results indicate the membrane arrangement comprising a bipolar membrane and cation exchange membrane is the most energy saving. With further optimization of operation conditions, the minimum power requirement for CO₂ recovery was reduced to 2.1 MJ/kg‐CO₂ (or 2.1 GJ/t‐CO₂). © 2009 American Institute of Chemical Engineers AIChE J, 2009     

Single-step synthesis and characterization of single-walled carbon nanohorns hybridized with Pd nanoparticles using N2 gas-injected arc-in-water method

Single-walled carbon nanohorns (SWCNHs) hybridized with palladium (Pd) nanoparticles were synthesized by a single-step gas-injected arc-in-water method (GI-AIW) with a Pd wire inserted inside the anode hole. In the arc zone, carbon and Pd were vaporized simultaneously, leading to the formation of hybrid material of SWCNHs and Pd nanoparticles due to effective quenching. Based on TEM and CO chemisorption analyses, Pd nanoparticles were found to be embedded inside SWCNH aggregates. The size of Pd nanoparticles, determined by X-ray diffraction, was in the range of 3–6 nm when Pd wires with diameters of 0.1 and 0.3 mm were used. Using a Pd wire with a diameter larger than 0.5 mm results in larger Pd nanoparticles which tend to be exposed to the outer surface of the hybrid material. According to thermogravimetric analyses, the weight fraction of Pd nanoparticles is increased by increasing the Pd wire diameter although the yield of Pd nanoparticles decreased. SWCNHs hybridized with dispersed Pd nanoparticles, synthesized with 0.1 mm Pd wire, exhibited strong anti-oxidation resistance with a highly graphitic structure.     

Solid-state characterization of polyethylene reactor powders and their structural changes upon annealing

Polyethylene reactor powders prepared under different conditions were characterized using transmission electron microscopy, ¹H nuclear magnetic resonance and X-ray diffraction techniques. The molecular weight of the polyethylene reactor powders was around 1 × 10⁵. A unique domain morphology, quite different from the usual melt- or solution-crystallized lamellar structure, was observed, independent of polymerization temperature (T_poly). Annealing of reactor powders caused the aggregation of these crystalline domains, due to the significant molecular motion of the amorphous chains, before melting. The critical temperature was 20 °C higher than each T_poly, and corresponded to the temperature at the active catalyst site producing the chain growth. The morphologies of powders prepared at the lower T_poly contained smaller crystals that exhibited a constrained monoclinic form. In contrast, only usual orthorhombic crystals of larger size were found within the powder prepared at the higher T_poly. These results suggest that the competitive processes of chain propagation and crystal growth upon polymerization may lead to unique variations of the crystalline and amorphous phases, but with similar intermediate components in the phase that connects them.     

One-Dimensional Phonon State of 4He Films Adsorbed in Straight Nanopores

We have studied heat capacities of ⁴He adsorbed in straight nanopores 1.8, 2.2, and 2.8 nm in diameter. Heat capacities of the ⁴He fluid film on the solid layer at 0.08–0.4 K show power laws close to T in 1.8 nm pores, close to T ² in 2.8 nm pores, and a crossover from T to T ² with increasing temperature in 2.2 nm pores. These heat capacities are explained by a model assuming a phonon dispersion with continuous one-dimensional (1D) states in the axial direction and discrete energy levels in the azimuthal direction. By fitting experimental data to the model, the phonon velocity along the pore axis and the energy gap for propagation in the cross section are derived. At temperatures sufficiently lower than the energy gap, where the thermal wave length of phonons is much longer than the effective pore diameter, the ⁴He fluid films show a T-linear heat capacity of 1D phonons propagating only along the pore axis. At higher temperatures, a 1D-2D crossover of phonons occurs.      

On the pseudo-freeness and the CDH assumption

The notion of pseudo-free group was first introduced by Hohenberger (Master’s thesis, EECS Dept., MIT, 2003). Rivest (TCC 2004. LNCS 2951, 505–521, 2004) formalized it and showed that several standard cryptographic assumptions hold on pseudo-free groups, such as the RSA assumption, the strong RSA assumption and the discrete logarithm assumption. Rivest (TCC 2004. LNCS 2951, 505–521, 2004) also proposed some variations of pseudo-free group, and those were formalized by Hirano and Tanaka (Research Reports, Series C: Computer Science, C-239, Tokyo Institute of Technology, 2007). In this paper, we study the relationships among such variations of pseudo-free group. We show that the pseudo-freeness implies the weak pseudo-freeness, and that the pseudo-freeness is equivalent to the pseudo-freeness with generalized exponential expressions. We also show that the computational Diffie-Hellman assumption holds on pseudo-free groups in a slightly varied form.