Implementation and test results of a wide-area measurement-based controller for damping interarea oscillations considering signal-transmission delay

The paper describes the implementation of a centralised control-design scheme in a real-time laboratory-based dynamic simulator. A centralised multivariable-control algorithm is designed employing remote feedback signals considering delay in signal transmission. The transmitted signals can be used for multiple-swing-mode damping using a single controller. Such an algorithm is numerically intensive owing to the high controller size and the predictor that takes care of the delay in signal transmission. The performance of the proposed controller is demonstrated by practical implementation using a rapid-prototyping controller mounted on a PC-ATX. Results of the experimental tests are shown for a detailed model of the power system implemented using Linux PC-based multiprocessor technology.     

An adaptive color image steganography method using adjacent pixel value differencing and LSB substitution technique

Abstract

Steganography is a data-concealing technique that provides a covert communication. This paper proposes a spatial domain color steganography method that uses a neighboring pixel-pair differencing concept to enhance the embedding capacity. The proposed method considers the distortion tolerance capacity of each color plane and the difference value between two neighboring pixels while deciding the number of bits that can be concealed in that pixel-pair. Each plane is divided into some disjoint blocks of size 3?×?3 pixels. The method forms eight pairs of pixels in one block using the eight-neighboring pixel concept, which enables the method to utilize all the edge pixels in all probable directions. It also uses the XOR encoding technique before the embedding process. This step provides an additional layer of security to the secret information. The simulation results show that the proposed method is able to achieve a high embedding capacity with good visual quality as per the calculation of imperceptibility metrics. The robustness of the method is tested by RS steganalysis and pixel difference histogram analysis. Further, a comparison between the proposed method and the existing methods on the basis of embedding capacity and stego image quality is shown.     

Insights into the physics of spray coating of SWNT films

Spray coating is a scalable and high-throughput process for fabrication of transparent and conducting coatings (TCCs) composed of single-walled carbon nanotubes (SWNTs). Presently the fundamentals of this process are not well understood. We show that suppression of coalescence of spray droplets by sufficiently rapid heat- and mass-transfer yields homogeneous SWNT films by preventing the formation of ‘coffee stains’ of larger length scale. Such heat and mass transfer is driven by differential evaporation between the top and edges of the drops, whereas thermal and compositional effects on surface tension and buoyancy are weak. Ultrasonic spraying ensures that the droplets are deposited without significant splashing, and delayed splashing at higher Weber number is evidenced. We find that the performance of spray-coated TCCs made from HiPCO SWNTs is limited by bundle diameter rather than length of the constituent SWNTs and bundes. Vapor acid doping with concentrated sulfuric acid roughly doubles the conductivity of the TCCs.     

Critical Issues in Sol-Gel Derived Ferroelectric Thin Films: A Review

In this article we have reviewed our recent research efforts on the synthesis and characterization of a wide spectrum of ferroelectric thin films for a variety of electronic and electro-optic devices including computer memories, tunable microwave devices, infra-red detectors, and electro-optic modulators. The review is separated into three sections; first we have described the process induced modifications of the properties of perovskite films prepared by sol-gel technique. The next section reviews the effect of certain impurity elements (e.g. La, Nd, Ce etc) in modifying the electrical characteristics of perovskite thin films followed by our experimental observations on the synthesis of epitaxially grown perovskite thin films by sol-gel technique. The epitaxial quality of BST thin films has been evaluated by fabricating eight element coupled microstrip phase shifters at NASA Glenn Research Center. Finally, future directions of sol-gel thin film research have been highlighted in view of these experimental observations.     

Comparison of the Electrical Characteristics of PZT and SBT Thin Films

The electrical properties of lead zirconate titanate (PZT) and strontium bismuth tantalate (SBT) thin films are compared for nonvolatile random access memory applications. PZT thin films have high switchable polarization with poor fatigue resistance and higher leakage current densities as compared to SBT thin films deposited on platinized silicon substrates. Characterization of these films in terms of their domain dynamics under application of sub-switchable and switchable electric fields give valuable insight about the observed differences in the electrical behavior. In the present work the dielectric behaviors of SBT and PZT thin films at sub-switchable electric field were analyzed in terms of Rayleigh law. The reversible and irreversible polarization component of switchable polarization was separated by the measurement of capacitance-voltage (C-V) and polarization hysteresis loops. The conduction mechanisms in these films were evaluated by measuring field dependence of leakage current densities at various temperatures. The observed differences in electrical properties are explained in terms of the intrinsic defects and defect-domain interaction of these two materials.     

Anomalies in hepatobiliary excretion of technetium-99m-MAG3 preparations

Technetium-99m-MAG3 is accepted as a renal tubular function agent. However, sporadic liver and gall bladder visualisation during its clinical use is clearly a disadvantage. HPLC-purified 99mTc-MAG3 samples exhibited appreciable hepatobiliary uptake (7%), and an elevated level of such uptake was observed in unpurified kit preparations, which was stated to be associated with the excretory property of the radiolabeled kit impurities. To verify this we attempted to quantitate the hepatobiliary uptake of the kit preparations with that of its radiolabeled components. The contribution of each component toward hepatobiliary uptake of the sample was calculated from their abundance in the chelate mixture and the individual biodistribution of the isolated components. However, the anticipated hepatobiliary uptake of different preparations of 99mTc-MAG3 calculated in this way was always lower than that of the experimental value determined directly. Further work is needed to explain the anomaly.     

Landcover classification in MRF context using Dempster-Shafer fusion for multisensor imagery.

This work deals with multisensor data fusion to obtain landcover classification. The role of feature-level fusion using the Dempster-Shafer rule and that of data-level fusion in the MRF context is studied in this paper to obtain an optimally segmented image. Subsequently, segments are validated and classification accuracy for the test data is evaluated. Two examples of data fusion of optical images and a synthetic aperture radar image are presented, each set having been acquired on different dates. Classification accuracies of the technique proposed are compared with those of some recent techniques in literature for the same image data.     

A MRF model-based segmentation approach to classification formultispectral imagery

An unsupervised segmentation approach to classification of multispectral image is suggested here in Markov random field (MRF) frame work. This work generalizes the work of Sarkar et al. (2000) on gray value images for multispectral images and is extended for landuse classification. The essence of this approach is based on capturing intrinsic characters of tonal and textural regions of any multispectral image. The approach takes an initially oversegmented image and the original. multispectral image as the input and defines a MRF over region adjacency graph (RAG) of the initially segmented regions. Energy function minimization associated with the MRF is carried out by applying a multivariate statistical test. A cluster validation scheme is outlined after obtaining optimal segmentation. Quantitative evaluation of classification accuracy of test data for three illustrations are shown and compared with conventional maximum likelihood procedure. Comparison of the proposed methodology with a recent work of texture segmentation in the literature has also been provided. The findings of the proposed method are found to be encouraging     

Breast cancer diagnosis using N2 laser excited autofluorescence spectroscopy

Carbonic anhydrase VI (CA VI) is a secreted enzyme produced predominantly by serous acinar cells of submandibular and parotid glands. We have investigated the developmental pattern of CA VI production by these glands in the sheep, from fetal life to adulthood, using immunohistochemistry. Also, a specific radioimmunoassay for CA VI was used to measure changes in enzyme expression in the parotid gland postnatally. CA VI is detectable by immunohistochemistry in parotid excretory ducts from 106 days gestation (term is 145 days), in striated ducts from 138 days and in acinar cells from 1 day postnatal. The duct cell content of CA VI declined as the acinar cell population increased, a feature also of CA VI immunoreactivity in the submandibular gland. Production of CA VI by submandibular duct cells was detectable initially at 125 days gestation, and acinar production was not seen before 29 days post-natal. Apart from the differing ontogeny of CA VI production in ducts and acini of parotid and submandibular glands, there was a parallel pattern of CA VI expression during the development of these major salivary glands. With the development of the acinar tissues in the postnatal lamb, there was a dramatic increase (about 600-fold) in the level of expression of CA VI in the parotid gland between days 7 and 59 as measured by radioimmunoassay.     

Electricity Generation and Wastewater Treatment of Oil Refinery in Microbial Fuel Cells Using Pseudomonas putida

Microbial fuel cells (MFCs) represent a novel platform for treating wastewater and at the same time generating electricity. Using Pseudomonas putida (BCRC 1059), a wild-type bacterium, we demonstrated that the refinery wastewater could be treated and also generate electric current in an air-cathode chamber over four-batch cycles for 63 cumulative days. Our study indicated that the oil refinery wastewater containing 2213 mg/L (ppm) chemical oxygen demand (COD) could be used as a substrate for electricity generation in the reactor of the MFC. A maximum voltage of 355 mV was obtained with the highest power density of 0.005 mW/cm² in the third cycle with a maximum current density of 0.015 mA/cm² in regard to the external resistor of 1000 Ω. A maximum coulombic efficiency of 6 × 10⁻²% was obtained in the fourth cycle. The removal efficiency of the COD reached 30% as a function of time. Electron transfer mechanism was studied using cyclic voltammetry, which indicated the presence of a soluble electron shuttle in the reactor. Our study demonstrated that oil refinery wastewater could be used as a substrate for electricity generation.