Mixing characteristics for the single and air-water two-phase flows in miniaturized parallel multichannel-based devices

Investigation on the miniaturized parallel multichannel-based devices packed with glass beads to improve the mass exchange execution is the critical focal point of the current study. One of the essential parameters to specify the miniaturized devices' flow distribution is the residence time distribution (RTD). In the present context, the RTDs of a liquid tracer were investigated for the air-water multiphase flows (concurrent) across the multichannel-based miniaturized devices (comprising of 11 similar dimensional parallel channels). The devices were variable in height and packed with glass beads. The conductivity estimations generated the RTD curves and were addressed by the axial dispersion model (ADM). The fluid-flow rates differed within the range of 5–23 ml min⁻¹. The axial dispersion coefficients and the rate of the specific energy dispersion were investigated. The effects of pressure difference and geometry on the hydrodynamic attributes and mixing properties were well-illustrated, and the new correlations were suggested.     

A novel endonuclease from kinetoplastid hemoflagellated protozoan parasite Leishmania

A nuclease activity has been purified from the nuclei-kinetoplast fraction of Leishmania. This enzyme, termed endonuclease M (Endo M), is shown by electrophoresis in a denaturing polyacrylamide gel to be associated with a single polypeptide of molecular mass 52 kDa. Physical analysis of the enzyme indicates that it has a sedimentation coefficient S20,w of 4.5S, a Stoke's radius of 32.5 A, and a native molecular mass of 53 kDa. The final Mono Q purified Endo M possesses both DNase and RNase activities. It acts as an endonuclease by introducing random single-stranded nicks into the supercoiled DNA molecules, that often leads to its linearization due to nicking at the opposite strands, and subsequent degradation of the DNA with further incubation. Single-stranded DNA is twice preferred to double-stranded DNA as substrate. Single-stranded RNA is also degraded rapidly and is competitive as a substrate with single-stranded DNA. RNA:DNA hybrids, however, are largely resistant to the Endo M digestion.     

Inversin, a novel gene in the vertebrate left-right axis pathway, is partially deleted in the inv mouse

A DNA fragment containing the recA gene of Gluconobacter oxydans was isolated and further characterized for its nucleotide sequence and ability to functionally complement various recA mutations. When expressed in an Escherichia coli recA host, the G. oxydans recA protein could efficiently function in homologous recombination and DNA damage repair. The recA gene's nucleotide sequence analysis revealed a protein of 344 amino acids with a molecular mass of 38 kDa. We observed an E. coli-like LexA repressor-binding site in the G. oxydans recA gene promoter region, suggesting that a LexA-like mediated response system may exist in G. oxydans. The expression of G. oxydans recA in E. coli RR1, a recA+ strain, surprisingly caused a remarkable reduction of the host wild-type recA gene function, whereas the expression of both Serratia marcescens recA and Pseudomonas aeruginosa recA gene caused only a slight inhibitory effect on function of the host wild-type recA gene product. Compared with the E. coli RecA protein, the identity of the amino acid sequence of G. oxydans RecA protein is much lower than those RecA proteins of both S. marcescens and Pseudomonas aeruginosa. This result suggests that the expression of another wild-type RecA could interfere with host wild-type recA gene's function, and the extent of such an interference is possibly correlated to the identity of the amino acid sequence between the two classes of RecA protein.     

Autocalibration of multiprojector CAVE-like immersive environments

In this paper, we present the first method for the geometric autocalibration of multiple projectors on a set of CAVE-like immersive display surfaces including truncated domes and 4 or 5-wall CAVEs (three side walls, floor, and/or ceiling). All such surfaces can be categorized as swept surfaces and multiple projectors can be registered on them using a single uncalibrated camera without using any physical markers on the surface. Our method can also handle nonlinear distortion in the projectors, common in compact setups where a short throw lens is mounted on each projector. Further, when the whole swept surface is not visible from a single camera view, we can register the projectors using multiple pan and tilted views of the same camera. Thus, our method scales well with different size and resolution of the display. Since we recover the 3D shape of the display, we can achieve registration that is correct from any arbitrary viewpoint appropriate for head-tracked single-user virtual reality systems. We can also achieve wallpapered registration, more appropriate for multiuser collaborative explorations. Though much more immersive than common surfaces like planes and cylinders, general swept surfaces are used today only for niche display environments. Even the more popular 4 or 5-wall CAVE is treated as a piecewise planar surface for calibration purposes and hence projectors are not allowed to be overlapped across the corners. Our method opens up the possibility of using such swept surfaces to create more immersive VR systems without compromising the simplicity of having a completely automatic calibration technique. Such calibration allows completely arbitrary positioning of the projectors in a 5-wall CAVE, without respecting the corners.     

Energy Efficiency of Two‐Phase Mixing in a Modified Bubble Column

Energy efficiency for gas liquid mixing in a modified downflow bubble column reactor has been analyzed in this paper. Efficiencies of the different parts of the bubble column have been assessed on the basis of energy dissipation. Prediction of the energy dissipation coefficient as well as energy utilization efficiency due to gas‐liquid mixing as a function of different physical, geometric and dynamic variables of the system has been done by correlation method. The distribution of energy utilization in the different zones of the column has also been analyzed. Experiments were carried out with air‐water and air‐aqueous solutions of carboxy methyl cellulose with different concentrations.     

Occurrence of wax esters and 1-O-alkyl-2,3-diacylglycerols in goat epididymal sperm plasma membrane

Two unusual lipid classes were detected by thin-layer chromatography in the neutral lipids derived from goat cauda-epididymal sperm plasma membrane. The lipids were identified as wax esters and 1-O-alkyl-2,3-diacylglycerols based on chromatographic properties, identity of their hydrolysis products, and infrared/¹H nuclear magnetic resonance spectral evidence. The membrane containedca. 3 and 5 μg/mg protein of wax esters and alkyldiacylglycerols, respectively. The relative proportions of wax esters and alkyldiacylglycerols in the total neutral lipids were 1.5% and 2.4%, respectively. The lipids contained fatty acids with chain lengths of C₁₄ to C₂₂. The major fatty acids of the wax esters were 14∶0, 16∶0, 16∶1ω7, 18∶0 and 18∶1ω9. The fatty acids in alkyldiacylglycerol were 16∶0, 18∶0, 22∶5ω3 and 22∶6ω3. Alkyldiacylglycerol was particularly rich in docosahexaenoic acid 22∶6ω3) representing 30% of the total fatty acids. The alcohols of wax ester were all saturated with C₂₀–C₂₉ carbon chains. The deacylated products derived from alkyldiacylglycerols were identified as hexadecyl, octadecyl and octadec-9′-enyl glycerol ethers.     

Artificial Neural Network and Grey Wolf Optimizer Based Surrogate Simulation-Optimization Model for Groundwater Remediation

We herein propose a simulation-optimization model for groundwater remediation, using PAT (pump and treat), by coupling artificial neural network (ANN) with the grey wolf optimizer (GWO). The input and output datasets to train and validate the ANN model are generated by repetitively simulating the groundwater flow and solute transport processes using the analytic element method (AEM) and random walk particle tracking (RWPT). The input dataset is the different realization of the pumping strategy and output dataset are hydraulic head and contaminant concentration at predefined locations. The ANN model is used to approximate the flow and transport processes of two unconfined aquifer case studies. The performance evaluation of the ANN model showed that the value of mean squared error (MSE) is close to zero and the value of the correlation coefficient (R) is close to 0.99. These results certainly depict high accuracy of the ANN model in approximating the AEM-RWPT model. Further, the ANN model is coupled with the GWO and it is used for remediation design using PAT. A comparison of the results of the ANN-GWO model with solutions of ANN-PSO (ANN-Particle Swarm Optimization) and ANN-DE (ANN-Differential Evolution) models illustrates the better stability and convergence behaviour of the proposed methodology for groundwater remediation.

     

Review of anthropometric considerations for tractor seat design

Tractor driving imposes a lot of physical and mental stress upon the operator. If the operator's seat is not comfortable, his work performance may be poor and there is also a possibility of accidents. The optimal design of tractor seat may be achieved by integrating anthropometric data with other technical features of the design. This paper reviews the existing information on the tractor seat design that considers anthropometry and biomechanical factors and gives an approach for seat design based on anthropometric data. The anthropometric dimensions, i.e. popliteal height sitting (5th percentile), hip breadth sitting (95th percentile), buttock popliteal length (5th percentile), interscye breadth (5th and 95th percentile) and sitting acromion height (5th percentile) of agricultural workers need to be taken into consideration for design of seat height, seat pan width, seat pan length, seat backrest width and seat backrest height, respectively, of a tractor. The seat dimensions recommended for tractor operator's comfort based on anthropometric data of 5434 Indian male agricultural workers were as follows: seat height of 380 mm, seat pan width of 420–450 mm, seat backrest width of 380–400 mm (bottom) and 270–290 mm (top), seat pan length of 370±10 mm, seat pan tilt of 5–7° backward and seat backrest height of 350 mm.

Relevance to industry

The approach presented in this paper for tractor seat design based on anthropometric considerations will help the tractor seat designers to develop and introduce seats suiting to the requirements of the user population. This will not only enhance the comfort of the tractor operators but may also help to reduce the occupational health problems of tractor operators.