Effective renaturation of reduced lysozyme by gentle removal of urea

To increase the folding yield of concentrated reduced lysozyme,we developed a renaturation method by means of dialysis fromconcentrated urea with redox agents. After lysozyme was incubatedin the reducing buffer (8 M urea solution) with oxidized glutathione,renaturation of reduced lysozyme was started by dialysis againstthe dialyzing buffer containing 8 M urea with redox agents.The urea concentration of the dialyzing bottle was graduallydiluted with dialyzing buffer without urea at a flow rate of0.1 ml/min by high pressure pump. Using this systematic dialysis,a concentration as high as 5 mg/ml of reduced lysozyme couldbe renaturated in 80% yield, while the folding yield was <5%even at a concentration of 1 mg/ml using a conventional rapiddilution method [Goldberg et al. (1991) Biochemistry, 30, 2790–2797].Therefore, it was concluded that gentle removal of urea fromdenatured proteins, dissolved in concentrated urea solution,by means of dialysis should be useful to renature denaturedproteins effectively.     

Warm deep drawing of wrought magnesium alloy sheets produced by semi-solid roll strip-casting process

This paper is concerned with the development of a continuous strip-casting technology to facilitate the manufacture of magnesium sheet alloys economically whilst maintaining high quality. Established in the paper is warm formability of cast magnesium alloy sheets after being hot rolled by semi-solid roll strip-casting process. It has been found that magnesium sheet with 2.0–4.0 mm thickness could be produced at a speed of 25 m/min. Hot rolling and annealing temperatures during hot rolling were also changed to examine which condition would be appropriate for producing wrought magnesium alloys with good formability. Microstructures of the crystals of the manufactured wrought magnesium alloys were observed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep-drawing test of the cast magnesium alloy sheets after being hot rolled.     

New dissimilarity measure for recognizing noisy subsequence trees

Tree is a data structure used to express various objects such as semistructured data and genes. When objects are represented as trees, computing tree similarity is essential for pattern recognition and retrieval. This paper considers the noisy subsequence tree recognition problem whose purpose is to recognize the original tree, given its noisy subsequence tree. Previous research on this problem relied on constrained tree edit distance to measure the dissimilarity. However, the number of relabelings must be predetermined to compute it. This paper proposes a new dissimilarity measure for this problem. Our dissimilarity measure is obtained by counting the node edit operations included in the unit‐cost tree edit distance that contribute to the matching of node labels. The number of relabelings need not be specified to compute our dissimilarity measure. Moreover, our measure achieves more accurate recognition performance and faster execution speed than the constrained tree edit distance. Our measure is also useful to solve the tree inclusion problem which is the problem of deciding whether a tree includes another tree and shows the extent of approximate tree inclusion when a tree incompletely includes another tree. © 2011 Wiley Periodicals, Inc.     

Flashover voltage of alumina ceramic contaminated by metal vapor in vacuum interrupters

We investigated the influence of metal vapor contamination of ceramic surfaces on flashover voltage (FOV) in vacuum. First, disk shape alumina (Al/sub 2/O/sub 3/) ceramics with surface resistivity (/spl rho/) of 10/sup 2/-10/sup 15/ /spl Omega/ were produced using deposition phenomena of metal vapor emitted from CuCr contacts. The impulse FOV for the ceramics decreased, as /spl rho/ reduced; FOV, the conditioning effect on FOV, and the scattering of FOV decreased when /spl rho/ was below 10/sup 12/ /spl Omega/. Therefore, the criterion value /spl rho/, which maintains excellent flashover performances of ceramic surface, is 10/sup 12/ /spl Omega/. Second, experimental vacuum interrupters (VIs) were produced to measure breakdown voltage before and after forty short-circuit current switchings with 20-40 kA/sub rms/ and were disassembled to measure the /spl rho/ of their inner ceramic surface. In a VI, which has inside diameters at both ends of the main shield much larger than the contact diameter, /spl rho/ was reduced to 10/sup 4/ /spl Omega/, further decreasing breakdown voltage between terminals.     

Order-disorder transition and its effect on microwave quality factor Q in Ba(Zn1/3Nb2/3)O3 system

Influences of composition deviation from stoichiometry and heat treatment on crystal phases and Q factor in Ba(Zn_1/3Nb_2/3)O₃(BZN) were studied. The structural order and the crystal phases strongly depended on the slight composition deviation from stoichiometric BZN. The maximum Q factor was obtained at the vicinity of the stoichiometric BZN. In the other regions, non-stoichiometric disordered BZN or ordered BZN with secondary phase were formed, and their Q factors were found to be low. For the stoichiometric BZN, the order-disorder phase transition occurred between 1300 and 1400^°C. The crystal-structural ordering of the stoichiometric BZN was improved by post-annealing at below its transition temperature, conserving the density and the grain size. However, no significant Q factor improvement was found. The Q factor of the stoichiometric BZN strongly depends on the density and grain size not on the crystal-structural order. These results suggest that the ceramic microstructure such as the pore and grain boundary, the secondary phase and lattice defect caused by non-stoichiometry affect the variation of the Q factor in BZN system than the crystal-structural ordering.     

Current dependence of performance of TES microcalorimeters and characteristics of excess noise

We are developing transition edge sensor (TES) microcalorimeter arrays for future Japanese astronomy missions. Although 6.6 eV energy resolution for 5.9 keV and 74 μs decay time are achieved, our energy resolution was limited by the excess noise of unknown origin. The dominant noise showed 1/R dependence and it only appeared when the current through the TES, I, is larger than 10 μA. This is explained if we assume a constant voltage noise source with a level of 2(4kT_CR_n)^1/2. We also investigated the influence of I on the TES performance and found the TES sensitivity is reduced when the ratio of current to the critical current I/I_C is large. It can explain the reduction of observed when operated without a magnetic shield. We also found a strong correlation between I_C and or the baseline width. Thus, we conclude that I_C is an essential parameter for the TES performance.     

Sol–Gel‐Derived High‐Performance Stacked Transparent Conductive Oxide Thin Films

Single‐ and multi‐layer transparent conductive oxide (TCO) thin films exhibiting high performance, good packing density and low surface/interface roughness are deposited on silica glass substrates by the sol–gel method. The crystal and microstructural properties of the TCO thin films are evaluated as an alternate to films prepared by ultra‐high vacuum deposition. Tin‐doped indium oxide (ITO) thin films produced using a two‐step drying process showed low surface roughness because of dense packing structure not only horizontal but also vertical directions. As a result, electrical conductivity, carrier concentration, carrier mobility, and optical transmittance of 2.3 × 10³ S/cm, 8 × 10²⁰ cm^?3, 18 cm²/Vs, and over 98% at 500 nm, respectively, were achieved. A multilayer ZnO/ITO stacked structure was also fabricated using the sol–gel process. Our findings suggest that solution‐based methods show promise as an alternative to existing ultra‐high vacuum methods to fabricate TCO thin films.     

Influence of a fiber-network microstructure of paper-structured catalyst on methanol reforming behavior

A novel microstructured catalyst that consists of Cu/ZnO catalyst powders and ceramic fibers was successfully prepared using pulp fibers as a tentative matrix by a papermaking technique. As-prepared material, called a paper-structured catalyst, possessed porous microstructure with layered ceramic fiber networks (average pore size ca. 20 μm, porosity ca. 50%). In the process of methanol autothermal reforming (ATR) to produce hydrogen, paper-structured catalysts demonstrated both high methanol conversion and low concentration of undesirable carbon monoxide as compared with catalyst powders and pellets. The catalytic performance of paper-structured catalysts depended on the use of pulp fibers, which were added in the paper-forming process and finally removed by thermal treatment before ATR performance tests. Confocal laser scanning microscopy and mercury intrusion analysis suggested that the tentative pulp fiber matrix played a significant role in regulating the fiber-network microstructure inside paper composites. Various metallic filters with different average pore sizes, used as supports for Cu/ZnO catalysts, were subjected to ATR performance tests for elucidating the pore effects. The tests indicated that the pore sizes of catalyst support had critical effects on the catalytic efficiency: the maximum hydrogen production was achieved by metallic filters with an average pore size of 20 μm. These results suggested that the paper-specific microstructures contributed to form a suitable catalytic reaction environment, possibly by promoting efficient diffusion of heat and reactants. The paper-structured catalyst with a regular pore microstructure is expected to be a promising catalytic material to provide both practical utility and high efficiency in the catalytic gas-reforming process.     

Laser diode optical frequency stabilisation technique on ITU-T frequency grid employing modulated sideband light

A novel optical frequency stabilisation technique on the ITU-T frequency grid employing modulated sideband light is proposed. The L-band laser diode second sideband light generated by phase-modulation is locked to a carbon monoxide ¹²C¹⁶O gas absorption line; the original carrier is placed on the ITU-T frequency grid. The square root of Allan variance of 10^-8 has been achieved for a period of 12 h.