Potential and viability of grid-connected solar PV system in Bangladesh

The potential of grid-connected solar PV system in Bangladesh was estimated utilizing GeoSpatial toolkit, NASA SSE solar radiation data and HOMER optimization software. Financial viability of solar photovoltaic as an electricity generation source for Bangladesh was also assessed utilizing a proposed 1-MW grid-connected solar PV system using RETScreen simulation software for 14 widespread locations in Bangladesh. The technical potential of gird-connected solar PV in Bangladesh was calculated as about 50174 MW. The annual electricity generation of the proposed system varied depending on the location between 1653 MWh and 1854 MWh, with a mean value of 1729 MWh. Several different economic and financial indicators were calculated, such as the internal rate of return, net present value, benefit-cost ratio, cost of energy production and simple payback. All indicators – for all sites – showed favorable condition for development of the proposed solar PV system in Bangladesh. The results also showed that a minimum of 1423 tons of greenhouse gas emissions can be avoided annually utilizing the proposed system at any part of the country.     

Strand Current Distribution Modeling in Turbo-generators Using Finite-element Method Based on Proposed Dual Method

Abstract—The necessity of using a 3D model is one of the main problems for modeling Roebel bar transposition in turbo-generators by the finite-element method. This article proposes a 2D dual model for computing strand current distribution in the Roebel bar of turbo-generators. Considering the leakage and mutual inductances for each strand and the coupling inductances between them, the end winding region is modeled in this 2D dual model. In this article, the Roebel bar structure including 16 strands was considered, and these distributions are calculated for different transpositions using the finite-element method. In the finite-element method model, the circulating currents are calculated by subtracting a load current at each strand from the total of strand current. Also, for different transpositions, such as 90°, 180°, 360°, and 540°, the circulating currents are calculated using an analytical method. The obtained strand current distributions from the 2D dual model have good agreement with the obtained results from the analytical method for the 180° and 360° transposed coil models.     

An ambipolar polymer additive for enhanced open circuit voltage in a bulk heterojunction solar cells

Open circuit voltage (V_OC) of organic bulk heterojunction solar cell is extended by the addition of a 20 wt % of F8TBT, an ambipolar polymer in the active layer matrixes (P3HT:PCBM) and then spin casted (1000 rpm/30 s) in the optimized devices on the PEDOT:PSS layer of the ITO glass. A substantial increase in the open circuit voltage from approximately 0.61–0.88 V (44.26%) has been observed with slight increase in efficiency up to 1.91% in the fabricated devices. However, further increment of F8TBT content to 40 wt % reduces the photovoltaic efficiency and affects the J_SC values remarkably, possibly due the excess amount of resistance developed. The enhancement of V_OC is attributed to the ambipolar nature of F8TBT polymer which facilitates the generated electron and hole transfer at the respective electrodes, enhanced π–π* conjugation in polymer matrix, a superior nanoscale separation, and better molecular conformation at the film interface, thus giving an ample opportunities to explore the impact of blending of materials rather than depositing a thin buffer layer by expensive vapor phase technologies. The details of electrical and microstructure characterization of the film were analyzed by AFM, SEM, UV–Vis, J–V characteristics, and EQE techniques. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43042.     

Optimization of algal lipid extraction by mixture of ethyl acetate and ethanol via response surface methodology for biodiesel production

The effects of extraction time, extraction temperature, solvent to biomass ratio and solvent composition on lipid yield from lyophilized Chlorococcum sp. biomass using a mixture of ethyl acetate and ethanol (EAE), a new proposed solvent, were studied. Subsequently, the process conditions of extraction by EAE were optimized using Box-Behnken design (BBD). The results revealed that the extraction temperature had the greatest effect on lipid extraction efficiency, followed by volume ratio of ethyl acetate to ethanol (EA/E) and extraction time. The largest lipid extraction yield of 15.74% was obtained under the following extraction conditions: 40mL solvents per gram of biomass for 270 min with gentle stirring at 80 °C by EAE with an EA/E of 1.0. Furthermore, palmitic acid, stearic acid, oleic acid, and linoleic acid were the most abundant fatty acids in the lipids extracted, indicating the great potential of the proposed lipid extraction procedure for microalgae-based biodiesel production.     

Geometrical design of thin film photovoltaic modules for improved shade tolerance and performance

Partial shading in photovoltaic modules is an important reliability and performance concern for all photovoltaic technologies. In this paper, we show how cell geometry can be used as a design variable for improved shade tolerance and performance in monolithic thin film photovoltaic modules (TFPV). We use circuit simulations to illustrate the geometrical aspects of partial shading in typical monolithic TFPV modules with rectangular cells, and formulate rules for shade tolerant design. We show that the problem of partial shading can be overcome by modifying the cell shape and orientation, while preserving the module shape and output characteristics. We discuss two geometrical designs with cells arranged in radial and spiral patterns, which (i) prevent the reverse breakdown of partially shaded cells, (ii) improve the overall power output under partial shading, and (iii) in case of spiral design, may additionally improve the module efficiency by reducing sheet resistance losses. We compare these designs quantitatively using realistic parameters and discuss the practical aspects for their implementation. Copyright © 2013 John Wiley & Sons, Ltd.     

MOFs 材料金属位点设计及沼气纯化应用研究

改变MOFs材料的中心金属能影响其气体的亲和性和双组份气体的吸附选择性（如比表面积,孔道结构,内部电场等）,本文合成并表征了M－DABCO系列（M＝Ni, Co, Cu, Zn） MOFs材料。并应用理想吸附溶液理论（Ideal Adsorbed Solution Theory,简称IAST）量化模拟了环境条件下双组分混合气体（组分比CO2：CH4＝40％：60％）的吸附选择性。 Ni－DABCO材料具有良好的CO2吸附性能和在环境条件下对CO2／CH4混合气体的吸附选择性。本文通过实验、表征及计算等来讨论中心金属对M－DABCO系列吸附位点的影响。     

Bioequivalence of two brands of ciprofloxacin 750 mg tablets (Sarf and Ciprobay) in healthy human volunteers

An open, randomized, two-way crossover study was carried out in 28 healthy volunteers at Gulf Pharmaceutical Industries (Julphar), as a joint venture with Saqr Hospital, Ras Al-Khaimah, UAE. The two commercial brands used were Sarf (Julphar, UAE) as test and Ciprobay (Bayer AG, Germany) as reference product. The drug was administered to each subject with 240 mL of water after an overnight fasting in two treatment days separated by a one-week washout period. After dosing, serial blood samples were collected for a period of 24 hr and serum was separated and analyzed for ciprofloxacin using a sensitive, reproducible, and accurate high-performance liquid chromatography (HPLC) method with ultraviolet (UV) detection. Various pharmacokinetic parameters, including AUC0-t, AUC0-infinity, Cmax, Tmax, t1/2, and lambdaz, were determined from ciprofloxacin serum concentration-time profiles for both formulations and found to be in good agreement with reported values. The parameters AUC0-t, AUC0-infinity, and Cmax were tested for bioequivalence after log-transformation of data. No significant difference was found based on analysis of variance (ANOVA); the 90% confidence intervals (95.73-107.62%, 94.98-108.26%, 92.80-103.90% for AUC0-t, AUC0-infinity, Cmax, respectively) for the test/reference ratios of these parameters were within the bioequivalence acceptance range of 80-125%. Based on this data, it is concluded that both formulations are bioequivalent and are interchangeable in medical practice.     

Target tracking in infrared imagery using weighted composite reference function-based decision fusion.

In this paper, we propose a novel decision fusion algorithm for target tracking in forward-looking infrared image sequences recorded from an airborne platform. An important part of this study is identifying the failure modes in this type of imagery. Our strategy is to prevent these failure modes from developing into tracking failures. The results furnished by competing ego-motion compensation and tracking algorithms are evaluated based on their similarity to a target model constructed using the weighted composite reference function.