Hybrid Solar Cells Based in Silicon Nanowires: Electronic Simulation and Optimization

Silicon - This paper presents recent progress in computational modeling on blend morphology of silicon nanowires (SiNWs) dispersed in a conjugated polymer poly(3-hexylthiophene) P3HT hybrid solar...     

The use of carbon nanomaterials in membrane distillation membranes: a review

Membrane distillation (MD) is a thermal-based separation technique with the potential to treat a wide range of water types for various applications and industries. Certain challenges remain however, which prevent it from becoming commercially widespread including moderate permeate flux, decline in separation performance over time due to pore wetting and high thermal energy requirements. Nevertheless, its attractive characteristics such as high rejection (ca. 100%) of non-volatile species, its ability to treat highly saline solutions under low operating pressures (typically atmospheric) as well as its ability to operate at low temperatures, enabling waste-heat integration, continue to drive research interests globally. Of particular interest is the class of carbon-based nanomaterials which includes graphene and carbon nanotubes, whose wide range of properties have been exploited in an attempt to overcome the technical challenges that MD faces. These low dimensional materials exhibit properties such as high specific surface area, high strength, tuneable hydrophobicity, enhanced vapour transport, high thermal and electrical conductivity and others. Their use in MD has resulted in improved membrane performance characteristics like increased permeability and reduced fouling propensity. They have also enabled novel membrane capabilities such as in-situ fouling detection and localised heat generation. In this review we provide a brief introduction to MD and describe key membrane characteristics and fabrication methods. We then give an account of the various uses of carbon nanomaterials for MD applications, focussing on polymeric membrane systems. Future research directions based on the findings are also suggested.     

An Eco-Friendly Approach to the Control of Pathogenic Microbes and Anopheles stephensi Malarial Vector Using Magnesium Oxide Nanoparticles (Mg-NPs) Fabricated by Penicillium chrysogenum

The discovery of eco-friendly, rapid, and cost-effective compounds to control diseases caused by microbes and insects are the main challenges. Herein, the magnesium oxide nanoparticles (MgO-NPs) are successfully fabricated by harnessing the metabolites secreted by Penicillium chrysogenum. The fabricated MgO-NPs were characterized using UV-Vis, XRD, TEM, DLS, EDX, FT-IR, and XPS analyses. Data showed the successful formation of crystallographic, spherical, well-dispersed MgO-NPs with sizes of 7–40 nm at a maximum wavelength of 250 nm. The EDX analysis confirms the presence of Mg and O ions as the main components with weight percentages of 13.62% and 7.76%, respectively. The activity of MgO-NPs as an antimicrobial agent was investigated against pathogens Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa, Escherichia coli, and Candida albicans, and exhibited zone of inhibitions of 12.0 ± 0.0, 12.7 ± 0.9, 23.3 ± 0.8, 17.7 ± 1.6, and 14.7 ± 0.6 mm respectively, at 200 µg mL⁻¹. The activity is decreased by decreasing the MgO-NPs concentration. The biogenic MgO-NPs exhibit high efficacy against different larvae instar and pupa of Anopheles stephensi, with LC50 values of 12.5–15.5 ppm for I–IV larvae instar and 16.5 ppm for the pupa. Additionally, 5 mg/cm² of MgO-NPs showed the highest protection percentages against adults of Anopheles stephensi, with values of 100% for 150 min and 67.6% ± 1.4% for 210 min.     

Real-Time Monitoring the Effect of Cytopathic Hypoxia on Retinal Pigment Epithelial Barrier Functionality Using Electric Cell-Substrate Impedance Sensing (ECIS) Biosensor Technology

Disruption of retinal pigment epithelial (RPE barrier integrity is a hallmark feature of various retinal blinding diseases, including diabetic macular edema and age-related macular degeneration, but the underlying causes and pathophysiology are not completely well-defined. One of the most conserved phenomena in biology is the progressive decline in mitochondrial function with aging leading to cytopathic hypoxia, where cells are unable to use oxygen for energy production. Therefore, this study aimed to thoroughly investigate the role of cytopathic hypoxia in compromising the barrier functionality of RPE cells. We used Electric Cell-Substrate Impedance Sensing (ECIS) system to monitor precisely in real time the barrier integrity of RPE cell line (ARPE-19) after treatment with various concentrations of cytopathic hypoxia-inducing agent, Cobalt(II) chloride (CoCl₂). We further investigated how the resistance across ARPE-19 cells changes across three separate parameters: R_b (the electrical resistance between ARPE-19 cells), α (the resistance between the ARPE-19 and its substrate), and C_m (the capacitance of the ARPE-19 cell membrane). The viability of the ARPE-19 cells and mitochondrial bioenergetics were quantified with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay and seahorse technology, respectively. ECIS measurement showed that CoCl₂ reduced the total impedance of ARPE-19 cells in a dose dependent manner across all tested frequencies. Specifically, the ECIS program’s modelling demonstrated that CoCl₂ affected R_b as it begins to drastically decrease earlier than α or C_m, although ARPE-19 cells’ viability was not compromised. Using seahorse technology, all three concentrations of CoCl₂ significantly impaired basal, maximal, and ATP-linked respirations of ARPE-19 cells but did not affect proton leak and non-mitochondrial bioenergetic. Concordantly, the expression of a major paracellular tight junction protein (ZO-1) was reduced significantly with CoCl_2-treatment in a dose-dependent manner. Our data demonstrate that the ARPE-19 cells have distinct dielectric properties in response to cytopathic hypoxia in which disruption of barrier integrity between ARPE-19 cells precedes any changes in cells’ viability, cell-substrate contacts, and cell membrane permeability. Such differences can be used in screening of selective agents that improve the assembly of RPE tight junction without compromising other RPE barrier parameters.     

Gurum Seeds: A Potential Source of Edible Oil

Cucurbitaceae family seeds are mostly discarded as agro-industrial wastes. Gurum (Citrullus lanatus var. colocynthoide) is an underutilized wild cucurbit plant, closely related to desert watermelon, which is grown abundantly in some African countries. Gurum seeds can play a significant role in health and nutrition due to their high oil content. This review describes the nutritional composition of gurum seeds and their oil profile. Gurum seeds are a good source of oil (27–35.5%), fiber (26–31%), crude protein (15–18%), and carbohydrates (14–17%). Gurum seeds oil is extracted by supercritical CO₂ (SFE), screw press, and solvent extraction techniques. The gurum seeds oil is composed of unsaturated fatty acids with a high proportion of linoleic acid (C18:2) and oleic acid (C18:1). Gurum seeds oil contains various bioactive compounds, such as tocopherols, phytosterols, and polyphenols. It is reported that solvent extraction gives a higher yield than the screw press and SFE, but the SFE is preferred due to safety issues. More studies are required for producing better quality gurum seeds oil by using novel extraction techniques that can increase oil yield.     

Combustion synthesis of NbC/ZrO2 composites: Influence of Cr additives on the microstructure and mechanical properties

Composites of NbC/ZrO₂ reinforced with different weight ratios of Cr metal were prepared by dynamic compaction combustion from a blend of Nb₂O₅–Zr–Cr powders. Factors controlling the synthesis process, the microstructure, and the mechanical properties of the samples, such as Cr wt% and the compression loads were studied. The samples were characterized by XRD, SEM, porosity, and hardness measurements. The porosity value of the sample with no additives was high and reached 31.6 vol%. A sudden decrease in the sample porosity to 2.4 vol % was noticed for the sample containing 3.0 wt% of Cr. A high-density sample with less than 2.0 vol % porosity and maximum hardness of 1038 HV was produced using 5.0 wt% Cr under 300 MPa compression load. Detailed thermodynamic calculations for the effect of Cr additives on the physicochemical properties of the system were introduced.     

The Impact of Metastable Intermolrecular Nanocomposite Particles on Kinetic Decomposition of Heterocyclic Nitramines Using Advanced Solid‐Phase Decomposition Models

Journal of Inorganic and Organometallic Polymers and Materials - Surface oxygen of oxide catalyst has low coordination number; they are negatively charged. Surface oxygen can act active site for...     

Electrochemical behaviour of Mn3+/Mn2+, Co3+/Co2+ and Ce4+/Ce4+ redox mediators in methanesulfonic acid

The redox behaviour of Mn³⁺/Mn²⁺, Co³⁺/Co²⁺ and Ce⁴⁺/Ce³⁺ mediators commonly used in indirect oxidation of organic compounds were evaluated in methane sulfonic acid on a glassy carbon working electrode employing cyclic voltammetry. Manganic methanesulfonate exhibits higher instability in dilute methanesulfonic acid. The solid MnO₂ formed during disproportionation on the glassy carbon electrode further affects the reproducibility. Cobaltic methanesulfonate formation occurs only at oxygen evolution region rendering the overall oxidation process less efficient. Ceric methane sulfonate formation is highly efficient over a wide acid concentration range. Ceric methanesulfonate can also be employed over a wide temperature range to oxidize different aromatic compounds.     

The lime-silica-water system: Equilibria at bulk calcium/silicon ratios of 1·5–2·5 AT 180–250°C

The stability relationships of xonotlite, foshagite and hillebrandite relative to kilchoanite and calcio-chondrodite have been studied under saturated steam pressures at 180° and 250°. Kilchoanite was unstable relative to xonotlite plus hillebrandite at 180°, or to foshagite plus hillebrandite at 250°; calcio-chondrodite was unstable relative to hillebrandite plus some more lime-rich phase, possibly Ca(OH)₂, at both temperatures. Foshagite was stable relative to xonotlite plus hillebrandite at 250°, but unstable relative to these phases at 180°.     

Barium aluminate hydrates. IV. α-BaO.Al2O3.4H2O

α-BaO.Al₂O₃.4H₂O has been synthesised and studied by infrared, X-ray and thermal analytical techniques. The compound of approximate formula BaO.Al₂O₃.0.5H₂O, described in Part III, forms as a dehydration product, and appears to be identical with the compound β-BAH₂ described by other workers. A possible explanation for the discrepancy in water content is discussed.