Enhancement of stack ventilation in hot and humid climate using a combination of roof solar collector and vertical stack

In the hot and humid climate, stack ventilation is inefficient due to small temperature difference between the inside and outside of naturally ventilated buildings. Hence, solar induced ventilation is a feasible alternative in enhancing the stack ventilation. This paper aims to investigate the effectiveness of a proposed solar induced ventilation strategy, which combines a roof solar collector and a vertical stack, in enhancing the stack ventilation performance in the hot and humid climate. The methodology selected for the investigation is physical experimental modelling which was carried out in the actual environment. The results are presented and discussed in terms of two performance variables: air temperature and air velocity. The findings indicate that the proposed strategy is able to enhance the stack ventilation, both in semi-clear sky and overcast sky conditions. The highest air temperature difference between the air inside the stack and the ambient air (T_i−T_o) is achieved in the semi-clear sky condition, which is about 9.9 °C (45.8 °C–35.9 °C). Meanwhile, in the overcast sky condition, the highest air temperature difference (T_i−T_o) is 6.2 °C (39.3 °C–33.1 °C). The experimental results also indicate good agreement with the theoretical results for the glass temperature, the air temperature in the roof solar collector’s channel and the absorber temperature. The findings also show that wind has significant effect to the induced air velocity by the proposed strategy.     

Electronic properties of polyaniline doped with dodecylbenzenesulphonic acid (PANI-DBSA) and poly(methyl methacrylate) (PMMA) blends in the presence of hydroquinone

Films of polyaniline doped with dodecylbenzenesulphonic acid (DBSA) and poly(methyl methacrylate) (PMMA) blends were studied with and without compatibilising agent “hydroquinone”. Hydroquinone was used to maximize solubility and to make it compatible with polymethylmethacrylate (PMMA) to get uniform and homogenous films on indium tin oxide ITO coated glass. Current density measurement as a function of voltage (J–V) and capacitance voltage (C–V) measurements at different temperature were carried out. The observed J–V and C–V characteristics can be satisfactorily fitted using the modified Schottky equations. The junction parameters were strongly influenced by hydroquinone. From C–V characteristics, the built-in voltage and charge carriers concentration were also calculated and discussed.     

Essential oils of Zingiber officinale var. rubrum Theilade and their antibacterial activities

The essential oils obtained by hydrodistilation of the leaves and rhizomes of Zingiber officinale var. rubrum Theilade were analysed by capillary GC and GC–MS. Forty-six constituents were identified in the leaf oil, while 54 were identified in the oil from the rhizomes. The leaf oil was clearly dominated by β-caryophyllene (31.7%), while the oil from the rhizomes was predominantly monoterpenoid, with camphene (14.5%), geranial (14.3%), and geranyl acetate (13.7%) the three most abundant constituents. The evaluation of antibacterial activities using the micro-dilution technique revealed that both the leaf and rhizome oils were moderately active against the Gram-positive bacteria Bacilluslicheniformis, Bacillus spizizenii and Staphylococcus aureus, and the Gram-negative bacteria Escherichia coli, Klebsiella pneumoniae and Pseudomonas stutzeri.     

Combustion characteristics of biomass in SouthEast Asia

Gas emission during combustion of mixed tropical wood, bamboo, oil palm trunk, acacia, and rubber wood have been investigated by using TG–MS in presence of oxygen as well as FTIR. The weight decreasing profiles and the gas formation rates of oil palm trunk was significantly different among the samples although their elemental composition was almost the same from biomass samples. It was found that H₂O is the main product formed for all samples. The evolving rates of the gaseous products during the combustion and infrared spectrums such as CO, H₂O, CO₂, CH₄ and COOH⁺ were found. The DTG curves spectrums for biomass present four overlapping peaks.     

Improved PNC Selection Criteria and Process for IEEE802.15.3 [Ad Hoc and Sensor Networks]

IEEE 802.15.3 is a standard that supports high data rate for wireless personal area networks. It implements a centralized topology for network monitoring and control. The centralized piconet coordinator (PNC) needs to be dynamically selected depending on a number of categories that measure its abilities as the most capable device compared to the surrounding devices in the network. This article presents an extension to the PNC selection criteria in IEEE 802.15.3 by modifying the reserved fields readily available in the standard to support user-centricity as well as other higher layer service dependent criteria. This article also develops the implementation process for the message header exchange between devices to support this new selection process. In addition, simulations are carried out that show the proof of concept of the manner in which this new criteria could be implemented in IEEE 802.15.3.     

Development of a PCR-restriction fragment length polymorphism protocol for rapid detection and differentiation of four cockroach vectors (group I "Dirty 22" species) responsible for food contamination and spreading of foodborne pathogens: public health importance

Assessing the adulteration of food products and the presence of filth and extraneous materials is one of the measures that the U.S. Food and Drug Administration (FDA) utilizes in implementing regulatory actions of public health importance. To date, 22 common pest species (also known as the "Dirty 22" species) have been regarded by this agency as the spreaders of foodborne diseases. We have further categorized the Dirty 22 species into four groups: I has four cockroach species, II has two ant species, III has 12 fly species, and IV has four rodent species. The presence of any Dirty 22 species is also considered an indicator of unsanitary conditions in food processing and storage facilities. In this study, we describe the development of a two-step nested PCR protocol to amplify the small subunit ribosomal gene of group I Dirty 22 species that include four cockroach species: Blattella germanica, Blatta orientalis, Periplaneta americana, and Supella longipalpa, along with the development of a PCR-restriction fragment length polymorphism method for rapid detection and differentiation of these violative species. This method will be utilized when the specimen cannot be identified with conventional microscopic taxonomic methods, especially when only small body parts are separated and recovered from food samples for analysis or when these body parts are in a decomposed state. This new PCR-restriction fragment length polymorphism will provide correct identification of group I Dirty 22 species; this information can then be used in regulation and prevention of foodborne pathogens.     

Resonance condition of a microfiber knot resonator immersed in liquids

Effects of immersing a microfiber knot resonator (MKR) in liquid solutions that have refractive indices close to that of silica are experimentally demonstrated and theoretically analyzed. Significant improvement in resonance extinction ratio within 2 to 10 dB was observed. To achieve a better understanding, a qualitative analysis of the coupling ratio and round-trip attenuation of the MKR is performed by using a curve-fitting method. It was observed that the coupling coefficient at the knot region increased when immersed in liquids. However, depending on the initial state of the coupling and the quantity of the increment in the coupling coefficient when immersed in a liquid, it is possible that the MKR may experience a deficit in the coupling parameter due to the sinusoidal relationship with the coupling coefficient.     

Solution Processing Route to Multifunctional Titania Thin Films: Highly Conductive and Photcatalytically Active Nb:TiO2

This paper reports the synthesis of highly conductive niobium doped titanium dioxide (Nb:TiO₂) films from the decomposition of Ti(OEt)₄ with dopant quantities of Nb(OEt)₅ by aerosol‐assisted chemical vapor deposition (AACVD). Doping Nb into the Ti sites results in n‐type conductivity, as determined by Hall effect measurements. The doped films display significantly improved electrical properties compared to pristine TiO₂ films. For 5 at.% Nb in the films, the charge carrier concentration was 2 × 10²¹ cm^?3 with a mobility of 2 cm² V^–1 s^–1 . The corresponding sheet resistance is as low as 6.5 Ω sq^–1 making the films suitable candidates for transparent conducting oxide (TCO) materials. This is, to the best of our knowledge, the lowest reported sheet resistance for Nb:TiO₂ films synthesized by vapour deposition. The doped films are also blue in colour, with the intensity dependent on the Nb concentration in the films. A combination of synchrotron, laboratory and theoretical techniques confirmed niobium doping into the anatase TiO₂ lattice. Computational methods also confirmed experimental results of both delocalized (Ti⁴⁺) and localized polaronic states (Ti³⁺) states. Additionally, the doped films also functioned as photocatalysts. Thus, Nb:TiO₂ combines four functional properties (photocatalysis, electrical conductivity, optical transparency and blue colouration) within the same layer, making it a promising alternative to conventional TCO materials.     

Enhancing ionic conductivity and flexibility in solid polymer electrolytes with rainforest honey as a green plasticizer

Solid polymer electrolytes (SPEs) play a pivotal role in advancing electrochemical devices, such as proton batteries and supercapacitors, owing to their potential for enhancing safety and flexibility. In this work, employs a solution casting technique to prepare SPEs, utilizing chitosan-dextran blends as the polymer matrix. Ammonium thiocyanate (NH₄SCN) is incorporated as a charge carrier, while honey is introduced as a plasticizer. The interaction between these materials is confirmed through Fourier transform infrared (FTIR) analysis. X-ray diffraction (XRD) analysis reveals that the addition of 10 wt.% honey (H10) to the polymer blend results in the lowest degree of crystallinity (15.24%), emphasizing the pivotal role of plasticizers in modulating the structural properties of SPEs. Furthermore, by incorporating 40 wt.% NH₄SCN (SN40) into the plasticizer-polymer host (H10), the ambient temperature conductivity obtains its maximum value of (1.08 ± 0.19 × 10⁻³ S cm⁻¹) with the lowest degree of crystallinity of 10.44%, verify it is the most amorphous electrolyte. The observed trend in conductivity is influenced by the diffusion coefficient (D), ion density (n), and mobility of the ions (μ). Complementing these findings, field emission scanning electron microscopy (FESEM) is employed to investigate the surface morphology and cross section of the SPEs, providing a comprehensive understanding of their structural characteristics. From linear sweep voltammetry (LSV), SN40 is electrochemically stable up to 2.2 V and the t_ion is 0.97 indicating that the ions are the dominant charge carriers.