Crushing behaviour of composite hemispherical shells subjected to quasi-static axial compressive load

This paper examines the effects of composite constituents and geometry on the energy absorption capability of composite hemispherical shells. To examine the effects of matrix types on their energy absorption capability, glass fibre/epoxy and glass fibre/polyester hemispherical shells were fabricated. While glass fibre/epoxy and carbon fibre/epoxy hemispherical shells were fabricated to investigate the effect of fibre reinforcements. Effect of aspect ratio (R/t) was also examined and the results were presented. The results obtained showed that the energy absorption capability of the hemispherical shells significantly affected by the composite constituents as well as R/t ratio.     

Isolation of fermentative microbial isolates from sugar cane and beet molasses and evaluation for enhanced production of bioethanol

In an attempt to produce bioethanol as a renewable and natural energy resource and as a promising alternative/complement to conventional petrol (i.e., gasoline), 44 microbial isolates (12 yeast and 32 bacterial strains) were isolated from molasses samples obtained from some of the sugar factories in Egypt. Among the microbial isolates obtained, only two yeast isolates (HSC-22 and HSC-24) were selected from sugarcane molasses (SCM) for their high bioethanol fermentation capabilities, recording bioethanol production of ≈9.6 and 8.2 g/L with actual yield of 0.48 and 0.41 g ethanol/g SCM, respectively, within 48-h incubation period at 30°C. Phylogenetic identification of these isolates was performed based on the analysis of the nucleotide sequence of the 18S rDNA gene, which indicated that these isolates can be identified as Pichia veronae and Candida tropicalis, respectively, with similarity of 99%.     

Assessment of solar and wind energy as motive for potential hydrogen production of Algeria country; development a methodology for uses hydrogen-based fuel cells

This study is based on method of storing the part of renewable energy in the hydrogen form for using in a fuel cell at the absence of solar radiation due to overcast day or in the night. In addition, the system advantage don't need a batteries compared with other systems. The present work is compared energy potential of the wind and solar with the results of hydrogen production and to address the various obstacles to study and evaluation. This work is assessment the renewable resources in various sites of Algeria, especially in Adrar area which is one regions of the high solar energy in the world, where the radiation rates exceed more than $2300kWh/m^2$ per year, the area is also characterized by high wind power. In fact, by these two energy sources (solar and wind) that it characterized by Adrar, it's interesting to combine electrical producing energy and hydrogen production. The studies indicate that there are the meteorological factors related to the nature of site (irradiation, temperature and wind speed) are linked to the generation of electricity by renewable energy. The results obtained showing that the hydrogen production related to the solar radiation values, where southern of Algeria has more hydrogen potential compared with the northern. The simulation results show that the energy supplied by a photovoltaic module type UDTS 50 can supply energy for ten electrolyzer cells which are connected in series with this module.     

Preparation of pseudocapacitor electrodes via electrodeposition of polyaniline on nonwoven carbon fiber fabrics

Aniline has been polymerized via electrodeposition onto various nonwoven carbon fiber fabric (CFF) substrates for use as a pseudocapacitive electrochemical capacitor. Four types of CFF were initially tested for double layer capacitance before polyaniline deposition, and again for specific capacitance after deposition. A binder‐free CFF was selected for further analysis due to its high capacitance change following PANI deposition (three orders of magnitude). The aniline monomer concentration, deposition potential, and deposition time were varied and resulting materials were characterized using chrono‐potentiometry, cyclic voltammetry, and scanning electron microscopy. The deposition potential range yielding highest capacitance was found to be between 0.744 and 0.777 V. A solution concentration of 0.5M aniline at a 20 min deposition time resulted in the highest specific capacitance (>80 F/g based on total electrode mass and >300 F/g based on PANI mass) within this study. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43315.     

Gold nanoparticles by soft UV nanoimprint lithography coupled to a lift-off process for plasmonic sensing of antibodies

In this paper, we present the results of gold nanoparticles fabrication on large area by soft UV nanoimprint lithography (UV-NIL) and lift-off process for antibodies sensing. For this fabrication, the hard polydimethylsiloxane (H-PDMS) is used as flexible mold material. A simple AMONIL/PMMA bilayer is used to transfer patterns by etching the substrate with a suitable RIE process. The UV-NIL process has enabled to obtain gold nanoparticles with a diameter about 160 nm on a zone of 1 mm². For bioplasmonic applications, the sensing of Anti-Biotin was studied.     

Nanoholes by soft UV nanoimprint lithography applied to study of membrane proteins

In this paper, we present an alternative technique to the well-known electron beam lithography in order to realize nanoholes in the silicon substrates for biological applications. The used technique is soft UV nanoimprint lithography (UV-NIL). We optimized the fabrication of silicon based supports obtained by soft UV-NIL and reactive ion etching to carry out very large arrays of nanoholes. The resolution limits are investigated when using poly(dimethylsiloxane) as flexible mold material. RIE conditions are initiated to limit the lateral mask resist etch.     

Fracture Analysis of a Special Cracked Lap Shear (CLS) Specimen with Utilization of Virtual Crack Closure Technique (VCCT) by Finite Element Methods

Some of the most important characteristics due to a fracture investigation of a special specimen are taken into account. Debonding considerations for a composite/steel cracked lap shear (CLS) specimen by utilization of finite element methods (FEM) as well as a virtual crack closure technique (VCCT) approach have been investigated. Strain energy release rate, delamination load case and direct cycle fatigue analysis have taken into consideration in this study, and the corresponding simulations have been done by ABAQUS/Standard. Linear elastic fracture criteria are used for validation of numerical results from the simulation. For comparison of three different categories of analysis, some special characteristics such as effective energy release rate ratio, bond state, time at bond failure and opening behind crack tip at bond failure have been illustrated. In this work, a detailed analysis of a special CLS specimen debonding by using VCCT and FEM is presented and varied results for validation of this kind of combination are obtained and have been discussed.     

Labeled flow-based dataset of ICMPv6-based DDoS attacks

Neural Computing and Applications - DDoS attacks that depend on Internet Control Message Protocol version 6 (ICMPv6) are one of the most commonly performed IPv6 attacks against today’s IPv6...     

Multi-instance cancellable biometrics schemes based on generative adversarial network

The main role of cancellable biometric schemes is to protect the privacy of the enrolled users. The protected biometric data are generated by applying a parametrized transformation function to the original biometric data. Although cancellable biometric schemes achieve high security levels, they may degrade the recognition accuracy. One of the mostwidely used approaches to enhance the recognition accuracy in biometric systems is to combine several instances of the same biometric modality. In this paper, two multi-instance cancellable biometric schemes based on iris traits are presented. The iris biometric trait is used in both schemes because of the reliability and stability of iris traits compared to the other biometric traits. A generative adversarial network (GAN) is used as a transformation function for the biometric features. The first scheme is based on a pre-transformation feature-level fusion, where the binary features of multiple instances are concatenated and inputted to the transformation phase. On the other hand, the second scheme is based on a post-transformation feature-level fusion, where each instance is separately inputted to the transformation phase. Experiments conducted on the CASIA Iris-V3-Internal database confirm the high recognition accuracy of the two proposed schemes. Moreover, the security of the proposed schemes is analyzed, and their robustness against two well-known types of attacks is proven.

     

Effect of Material and Geometry on Crushing Behaviour of Laminated Conical Composite Shells

This paper examines the effects of the material and structural geometry on the crushing behaviour, energy absorption, failure mechanism and failure mode of circular conical composite shell. The static crushing behaviour of circular conical composite shell under uniform axial compressive load has been investigated experimentally. The cone vertex angles used were 0, 6, 12 and 18 degrees. The cone vertical length and bottom outer diameter were kept for all the cases as 100 and 110 mm, respectively. Failure modes were examined using several photographs taken during the crushing stages for each specimen. Results obtained from this investigation showed that the initial failure was dominated by the interfacial and shear failure, while the delamination and eventually fibre fracture were dominated the failure mechanism after the initial failure. It has also found that the static crushing behaviour of the circular conical shell is very sensitive to the change in the vertex angle. Reinforcement type greatly affects the energy absorption of the circular conical and cylindrical shells.