Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Creep fracture by slow crack growth is studied in a medium density polyethylene at 60 °C and 80 °C. Whereas elastic-plastic fracture mechanics load parameters fail to provide a unique temperature-independent correlation, that of the fracture mechanics for creeping solids C^∗ is proved to be relevant since this parameter correlates very well with the time to failure. Correlation established on both full notched creep tensile and double edge notched tensile tests was validated on cracked gas-pipe samples tested under hydrostatic pressure, extending the use of time to failure versus C^∗ diagram to predict lifetime of engineering components.     

Enhanced simulated-annealing-based algorithms and their applications to process planning in reconfigurable manufacturing systems

Capabilities of enhanced simulated-annealing-based algorithms in solving process planning problems in reconfigurable manufacturing are investigated. The algorithms are enhanced by combining variants of the simulated annealing technique with other algorithm concepts such as (i) knowledge exploitation and (ii) parallelism. Four configurations of simulated annealing algorithms are devised and engaged to solve an instance of a process planning problem in reconfigurable manufacturing systems. These configurations include; a basic simulated annealing algorithm, a variant of the basic simulated annealing algorithm, a variant of the simulated annealing algorithm coupled with auxiliary knowledge and a variant of the simulated annealing algorithm implemented in a quasi-parallel architecture. Although differences in performances were observed, the implemented algorithms are capable of obtaining good solutions in reasonable time. Experimental results show that the performances of the variants of simulated annealing based algorithms are better in comparison to a basic simulated annealing algorithm. A computational analysis and comparison using ANOVA indicates that improvements towards a better optimal solution can be gained by implementing variants of the simulated annealing algorithm. In addition, little speed gains can be obtained by implementing variants of the simulated annealing algorithms that are coupled with other algorithmic concepts.     

Light composite elliptic springs for vehicle suspension

For composites to compete in vehicle suspension applications, it is essential to control their failure by utilising their strength in principal direction instead of shear. This can be achieved efficiently by employing a new configuration instead of existing one. This study marries between an elliptical configuration and the woven roving composites.

In this paper, the influence of ellipticity ratio on performance of woven roving wrapped composite elliptical springs has been investigated both experimentally and numerically. A series of experiments was conducted for composite elliptical springs with ellipticity ratios (a/b) ranging from one to two. Typical failure histories of their failure mechanism are presented and discussed. In general, this study demonstrated that composites elliptical spring can be used for light and heavy trucks and meet the requirements, together with substantial weight saving. The results showed that the ellipticity ratio significantly influenced the spring rate and failure loads. Composite elliptic spring with ellipticity ratios of a/b 2.0 displayed the highest spring rate.     

Design development of aggregates cooling systems for hot weather concreting

Using hot aggregates, in concrete production, results in a drop in compressive strength of the produced concrete. Various methods have been proposed for cooling concrete aggregates. This paper proposes new two designs for aggregates cooling systems for various production rate demands. Conveyor system for small to moderate production rates and rotating drum for high production rates. Simulation of the heat flow during the cooling process over the conveyor and through the drum are analyzed with the objective of understanding the effect of the various design parameters and achieving minimum cooling time with the least possible power. Finite element models for the new designs are proposed and discussed. The results of the finite element analysis of the new designs are presented for various initial conditions and cooling rates.     

Brown tumors in dialyzed patients with secondary hyperparathyroidism: Report of 16 cases

Brown tumors (BTs) are relatively uncommon but they are serious complications of renal osteodystrophy. The objective of this study was to analyze the clinical, biological, and radiological characteristics of 16 patients with BTs provoked by secondary hyperparathyroidism (sHPT) and its response to the decrease in parathyroid hormone levels after parathyroidectomy (PTX). The management of that uncommon condition was also reviewed. We conducted a retrospective study including 16 end‐stage renal disease patients who underwent subtotal PTX between 1997 and 2007 for severe sHPT with BTs. Our study included 10 men and 6 women, whose average age was 34 years. All patients were on dialysis. Ten of them were on dialysis for more than 5 years. The median duration on dialysis was 84 months. Patients included suffered from swellings associated with functional limitations. BTs had multiple locations in 7 patients. Jaw was the most frequent location (62%). Radiography and tomodensitometry demonstrated a mixed radio lucent and radio‐opaque lesions with an expansion of the cortical bone. Bone scan demonstrated an increased uptake of lesions. Chirurgical treatment was indicated in all cases because of severe refractory sHPT with functional limitations and/or disfiguring deformities. In all cases, BTs stopped its progression and even decreased in size. However, it was insufficient in four cases, which required a surgical resection. PTX remains an efficacious approach in resistant cases of sHPT with persistent BTs.     

Methodology for WEEE assessment in Algeria

Waste electrical and electronic equipment (WEEE) generated in emerging countries is increasing. This study presents a methodology to improve assessment and monitoring WEEE in Algeria. The proposed methodology is a two-step approach. The first step is the collection and collation of existing data from different national and international sources. In the second step, different assessment and forecasting methods are applied. Forecasting methods were selected from those models which provided minimum error indices. The paper considers also the availability and reliability of data in order to provide a future reliable assessment of WEEE in Algeria. The study revealed that the forecasting methods do not have a big influence on the results contrary to the inputs of the model.     

The polynomial discrete Radon transform

This paper presents a new approach called polynomial discrete Radon transform (PDRT), regarded as a generalization of the classical finite discrete Radon transform. Specifically, the PDRT transforms an image into Radon space by summing the pixels according to polynomial curves. The PDRT can be applied on square \(p \times p\) images where \(p\) is assumed to be a prime number. It is based on a simple arithmetic operations and requires no data interpolation. An interesting property of the PDRT is its exact inversion. This means that an image can be transformed and then perfectly reconstructed. Through this study, we show that the new approach can be applied for some pattern recognition applications.     

Performance analysis of multiple‐input multiple‐output relay networks based impulse radio ultra‐wideband

In this paper, we study the performance of time hopping pulse position modulation for impulse radio ultra‐wideband. We consider relay network applying decode‐and‐forward protocol. The channels between nodes adopt the IEEE 802.15.4a norms. The bit error rate performance is analyzed considering the effect of interference. Our results show significant improvement due to the diversity gain provided by the relay nodes. However, the performance is limited when multiple access interference (MAI) is present. To combat the MAI effect and further improve the detection reliability, we propose to use antenna selection at the relay. The relay receiver is assumed to be equipped with multiple antennas, and only the best antenna is selected. This is shown to improve the performance in the presence of MAI and improve the diversity gain.Copyright © 2013 John Wiley & Sons, Ltd.     

The BNM-LPTF software for the frequency comparison of atomic clocks by the carrier phase of the GPS signal

This paper describes the software and equipment used at the Laboratoire Primaire du Temps et des Frequences du Bureau National de Metrologie (BNM-LPTF), Paris, France. Two H-masers in short baseline, one located at the BNM-LPTF and the other at the Laboratoire de l'Horloge Atomique du Centre National de la Recherche Scientifique (CNRS-LHA), Orsay, France, were computed in parallel with the BNM-LPTF software and with the BERNESE V 4.1 software. The comparison of the results issued from both computations shows an agreement within 100 ps (1 sigma). In addition, comparisons with the BNM-LPTF software were made over 10 days with the H-masers located at the Physikalisch-Technische Bundesanstalt (PTB), Braunschweig, Germany, and another at the National Physical Laboratory (NPL), Teddington, United Kingdom. The data collected show that a modulation with an amplitude of 50 ps and a period of 700-800 ps affects the equipment of the NPL. In addition, these comparisons show that the noise of the instruments together with the environmental conditions at the PTB was higher than that of the NPL and the BNM-LPTF during the observation period. The best relative frequency stability obtained, in the BNM-LPTF/NPL comparison, is about 3x10(-15) for averaging periods between 6x10(4) s and 3x10(5) s. This result is in good agreement with the expected stability of H-masers. It demonstrates that the noise brought by the GPS carrier phase measurements can be averaged out at this level.     

Frequency performances of a miniature optically pumped cesium beam frequency standard

The optically pumped cesium beam clock named Cs IV is operated with a new short Ramsey cavity satisfying strict requirements on the microwave leakage level. The most relevant characteristics of the device are presented. Cs IV is presently driven by standard electronics coming from a HP 5061 B clock that provides a sinusoidal modulation of the interrogation microwave signal and a microwave power stability of about 1% at a temperature of 20+/-1 degrees C. The short- and medium-term frequency stability measurement gives sigma(y)(1 day)=2x10(-14): this value holds up to 3 days. The accuracy evaluation results in an uncertainty of 10(-12), and the repeatability is evaluated to 3x10(-13). It appears that the flicker floor is beginning at 2x10(-14) and is mainly due to both the power fluctuations of the free running microwave interrogating signal and the fluctuations of the external static magnetic field. The accuracy is limited by the lack of knowledge of the end-to-end cavity phase shift.