Air impingement and intermittent drying: Application to apple and to mango

An original drying process combining air impingement and intermittent drying was studied on apple slices and mango cubes. The influence of four operating parameters (air velocity, drying/tempering periods, upper height, and air temperature) on the drying time and on the drying rate was evaluated. Continuous and intermittent drying were compared. The intermittency α = 1/7 (τ_on = 10 seconds and τ_off = 60 seconds) gave the best results. A time savings of 54% for apple and 67% for mango was reached. In continuous drying, a time savings of 4620 seconds was observed by increasing the air velocity from 6 to 40 m s^?1 for apple. Air temperatures of 328 K for apple and of 328 K or 338 K for mango were determined as optimum to prevent case‐hardening. Experimental results were fitted with the analytical solution of Fick's second law and the modified Page equation (average values R² = 0.985 and 0.961, for apple and mango, respectively). For both products, the apparent moisture diffusivity D_app, the drying constant k, the drying coefficient n, and the activation energy E_a, were identified. Activation energies calculated from the analytical solution were 30.3 and 36.8 kJ mol^?1 and were 25.4 and 30.0 kJ mol^?1 using the modified Page equation for apple and mango, respectively. Mango has an increased temperature sensitivity and thus will need less energy for drying than apple.     

NH_3 Plasma Surface Treatments of Engineering Fluoropolymers: A Way to Enhance Adhesion of Ni or Cu Thin Films Deposited by Electroless Plating

FLUOROPOLYMERS(FPs)are thermoplasticmaterials which exhibit a number of unique chemicaland physical characteristics that no other man-madeplastic product gets together.For example,FPs showvery good resistance to almost all chemicals,excellentwater vapor barrier properties,high thermal stability,outstanding electrical insulation properties(lowdielectric constant and dissipation factors),extremelylow frictional coefficient giving them high auto-lubrication properties,high resistance to rad…     

Air‐ground Matching: Appearance‐based GPS‐denied Urban Localization of Micro Aerial Vehicles

In this paper, we address the problem of globally localizing and tracking the pose of a camera‐equipped micro aerial vehicle (MAV) flying in urban streets at low altitudes without GPS. An image‐based global positioning system is introduced to localize the MAV with respect to the surrounding buildings. We propose a novel air‐ground image‐matching algorithm to search the airborne image of the MAV within a ground‐level, geotagged image database. Based on the detected matching image features, we infer the global position of the MAV by back‐projecting the corresponding image points onto a cadastral three‐dimensional city model. Furthermore, we describe an algorithm to track the position of the flying vehicle over several frames and to correct the accumulated drift of the visual odometry whenever a good match is detected between the airborne and the ground‐level images. The proposed approach is tested on a 2 km trajectory with a small quadrocopter flying in the streets of Zurich. Our vision‐based global localization can robustly handle extreme changes in viewpoint, illumination, perceptual aliasing, and over‐season variations, thus outperforming conventional visual place‐recognition approaches. The dataset is made publicly available to the research community. To the best of our knowledge, this is the first work that studies and demonstrates global localization and position tracking of a drone in urban streets with a single onboard camera.     

Static Strategies for Worksharing with Unrecoverable Interruptions

One has a large workload that is “divisible”—its constituent work’s granularity can be adjusted arbitrarily—and one has access to p remote worker computers that can assist in computing the workload. How can one best utilize the workers? Complicating this question is the fact that each worker is subject to interruptions (of known likelihood) that kill all work in progress on it. One wishes to orchestrate sharing the workload with the workers in a way that maximizes the expected amount of work completed. Strategies are presented for achieving this goal, by balancing the desire to checkpoint often—thereby decreasing the amount of vulnerable work at any point—vs. the desire to avoid the context-switching required to checkpoint. Schedules must also temper the desire to replicate work, because such replication diminishes the effective remote workforce. The current study demonstrates the accessibility of strategies that provably maximize the expected amount of work when there is only one worker (the case p=1) and, at least in an asymptotic sense, when there are two workers (the case p=2); but the study strongly suggests the intractability of exact maximization for p≥2 computers, as work replication on multiple workers joins checkpointing as a vehicle for decreasing the impact of work-killing interruptions. We respond to that challenge by developing efficient heuristics that employ both checkpointing and work replication as mechanisms for decreasing the impact of work-killing interruptions. The quality of these heuristics, in expected amount of work completed, is assessed through exhaustive simulations that use both idealized models and actual trace data.     

Synchronized switch harvesting applied to self-powered smart systems: Piezoactive microgenerators for autonomous wireless receivers

This paper introduces the conceptual architecture of a fully integrated, truly self-powered structural health monitoring (SHM) scheme. The challenge here is to power an array of numerous distributed actuators and sensors as well as wireless data transmission modules without recurring to heavy and costly wiring. Based on microgenerators which directly convert ambient mechanical energy into electrical energy, using the synchronized switch harvesting (SSH) method, the proposed solution allows avoiding the periodic replacement or reloading of batteries. This addresses environmental and economic issues at the same time, knowing that such elements are heavy, polluting and might be installed in rather inaccessible locations. Indeed, especially in airborne structures saving weight and maintenance cost is of priority importance.Previous work showed that such microgenerators provide a stand-alone power source, whose performances meet the requirements of autonomous wireless transmitters (AWTs) that comprise an acoustic Lamb wave's actuator and a radio frequency (RF) emitter (D. Guyomar, Y. Jayet, L. Petit, E. Lefeuvre, T. Monnier, C. Richard, M. Lallart, Synchronized switch harvesting applied to self-powered smart systems: Piezoactive microgenerators for autonomous wireless transmitters, Sens Actuators A: Phys. 138 (1) (2007) 151–160, doi:10.1016/j.sna.2007.04.009). Following this work, the present contribution presents a further step towards the integration of the SHM technique. It shows the ability of our microgenerators to provide enough energy to give logical autonomy to each self-powered sensing node, named autonomous wireless receiver (AWR), and thus to provide some local (decentralized) pre-processing ability to the SHM system.A preliminary design of the device using off-the-shelf electronics and surface mounted piezoelectric patches will be presented. Since the existence of a positive energy balance between the harvesting capabilities of the SSH technique and the energy requirements of the proposed device will be proved, the system formed by the combination of the AWR with the previously developed AWT, is a proof of concept of truly self-powered smart systems for damage detection in simple structures, setting apart application-specific optimization or miniaturization concerns that will be addressed in future works.     

Crossing textual and visual content in different application scenarios

This paper deals with multimedia information access. We propose two new approaches for hybrid text-image information processing that can be straightforwardly generalized to the more general multimodal scenario. Both approaches fall in the trans-media pseudo-relevance feedback category. Our first method proposes using a mixture model of the aggregate components, considering them as a single relevance concept. In our second approach, we define trans-media similarities as an aggregation of monomodal similarities between the elements of the aggregate and the new multimodal object. We also introduce the monomodal similarity measures for text and images that serve as basic components for both proposed trans-media similarities. We show how one can frame a large variety of problem in order to address them with the proposed techniques: image annotation or captioning, text illustration and multimedia retrieval and clustering. Finally, we present how these methods can be integrated in two applications: a travel blog assistant system and a tool for browsing the Wikipedia taking into account the multimedia nature of its content.

On the Black-Box Complexity of Sperner’s Lemma

We present several results on the complexity of various forms of Sperner’s Lemma in the black-box model of computing. We give a deterministic algorithm for Sperner problems over pseudo-manifolds of arbitrary dimension. The query complexity of our algorithm is linear in the separation number of the skeleton graph of the manifold and the size of its boundary. As a corollary we get an deterministic query algorithm for the black-box version of the problem 2D-SPERNER, a well studied member of Papadimitriou’s complexity class PPAD. This upper bound matches the deterministic lower bound of Crescenzi and Silvestri. The tightness of this bound was not known before. In another result we prove for the same problem an lower bound for its probabilistic, and an lower bound for its quantum query complexity, showing that all these measures are polynomially related. Research supported by the European Commission IST Integrated Project Qubit Application (QAP) 015848, the OTKA grants T42559 and T46234, and by the ANR Blanc AlgoQP grant of the French Research Ministry.     

Ferritin Protein Regulates the Degradation of Iron Oxide Nanoparticles

Proteins implicated in iron homeostasis are assumed to be also involved in the cellular processing of iron oxide nanoparticles. In this work, the role of an endogenous iron storage protein—namely the ferritin—is examined in the remediation and biodegradation of magnetic iron oxide nanoparticles. Previous in vivo studies suggest the intracellular transfer of the iron ions released during the degradation of nanoparticles to endogenous protein cages within lysosomal compartments. Here, the capacity of ferritin cages to accommodate and store the degradation products of nanoparticles is investigated in vitro in the physiological acidic environment of the lysosomes. Moreover, it is questioned whether ferritin proteins can play an active role in the degradation of the nanoparticles. The magnetic, colloidal, and structural follow‐up of iron oxide nanoparticles and proteins in lysosome‐like medium confirms the efficient remediation of potentially harmful iron ions generated by nanoparticles within ferritins. The presence of ferritins, however, delays the degradation of particles due to a complex colloidal behavior of the mixture in acidic medium. This study exemplifies the important implications of intracellular proteins in processes of degradation and metabolization of iron oxide nanoparticles.