气体引射器流体动力特性实验研究

在实验装置上对气体引射器计算基本公式进行了实测验证，分析了理论特性曲线的可信度。通过实验，获得一些参数对引射器工况的影响规律。     

Modification of hypoeutectic low alloy white cast irons

In order to modify the continuous network of eutectic cementite normally found in low alloy white cast irons into a dispersive distribution, strategies of controlling the morphology of eutectic cementite by additives are discussed. Qualitative arguments are presented and applied to the development of a complex modifier REAINTi. With the addition of this modifier to low carbon white cast irons nearly one fifth of the original eutectic cementite network can be modified into blocky particles in the plane of polish, and one third into isolated irregular ones. The experimental data shows that Ti(CN) may act as an effective nucleant or a grain refiner for eutectic cementite. The modification effects of rare earth elements are attributed to their abilities to purify the melt, promote divorced eutectic growth and refine the microstructure. Aluminium contributes to the modification by its purification effect.     

CA／PAN中空纤维血浆分离膜的结构与性能

本研究以CA及PAN的共混溶液,通过干-湿法纺丝制取中空纤维,利用共混高聚物各组分在凝固剂中相分离速度的差异,形成具有稳定结构的中空纤维孔膜,该膜用于分离血液中的血浆成分具有良好效果。讨论了成型条件及添加剂等对膜结构、性能的影响,用SEM及图相分析仪、MAP压汞仪及DSC等分析手段,对膜的微孔结构、形态、孔尺寸及中空纤维膜的血浆通量和水通量等进行了系统的考查。     

2Mbit/s高速信令链路在移动通信七号信令网中的应用

通过对2Mbit/s高速信令链路原理、特点的介绍，阐明了该技术在现阶段使用的实际意义，并给出了2Mbit/s高速信令链路在移动通信七号信令网中的应用。     

软X射线对血液有形成分表面电荷的影响——2、淋巴细胞和血小板膜电荷的变化

软X射线不仅能引起红细胞表面电荷的变化,同时也能导致淋巴细胞和血小板表面电荷下降,表现为照射后它们的电泳率下降。低剂量范围内,这种电荷的变化是暂时性的,照后4小时降到最低点,24小时后恢复到对照的水平。细胞电泳率的下降与辐射剂量相关。淋巴细胞是一个复杂的细胞群,正常状态下,按细胞在电场中泳动速度的快慢,可分为两个组分:快峰为T细胞,慢峰为B细胞。软X射线照射以后,T和B细胞的电泳率皆减慢,频数分布峰值下降,离散度加大。血小板成分单一,电泳率较一致。 从照射浓集的血小板再加回自身血浆中电泳率的下降较照射血浆再加到血小板中的电泳率下降大得多;受照射的血小板在磷酸缓冲液中电泳率下降较在血浆悬液中严重得多;2000 rad照后,悬浮于血浆中的血小板电泳率能恢复,而悬浮于磷酸缓冲液中则不能恢复,三个方面来看,血浆中可能存在抗辐射因子。超氧化物岐化酶能有效地预防血小板电泳率的下降,从而可阻止血小板的凝聚。     

企业培训中心的六个主要特征

提出企业培训中心的本质特征,并以此为基点阐述企业培训中心的六个主要特征;通过对企业培训中心的使命、培训对象的确定、培养目标、培训内容、组织设置、组织发展的分析,力求揭示企业培训中心组织构建和发展的自身规律。     

数据增值业务在DVB中的实现

首先对DVB标准作了简单介绍，然后讨论了在数字电视系统中实现增值业务，最后给出了一个实例。     

Amorphous diffusion bonding of steel pipe and its impact toughness

An iron-based amorphous foil (FeNiCrSiB) was used as an interlayer for the amorphous diffusion bonding of low carbon steel pipes under argon flux. The microstructure and mechanical properties of the joint were analyzed using an electron probe micro-analyzer (EPMA), tensile test, bending test and impact test. The results show that the joint microstructure resembles that of the base metal and no precipitates form at the joint. Melting point depressants (B, Si) diffuse far away from the joint and the base metal element is homogenous across the joint. The joint impact toughness is greater than the base metal toughness and the mechanical properties of the joint are similar around the pipe.