遗传算法在GSM移动通信网络频率规划中的应用

应用遗传算法设计和开发了针对爱立信GSM900系统的频率规划软件。在设计中，采用了交叉点存储、变异回退以及分割分步降维的方法，从而提高遗传算法的执行速度。     

马西洼槽中南部区带综合评价

马西洼槽是饶阳凹陷的主力生油洼槽,它为任丘潜山构造带、南马庄构造带、八里庄构造带提供油源。马西中南部剩余资源量较大,勘探目的层系多、勘探领域广,有较大勘探潜力。通过层序地层学的研究、构造精细解释和地质综合评价认为,马西断裂构造带为构造—岩性复合圈闭发育带,南马庄构造带为地层—岩性圈闭发育带。下第三系Es3段为最有潜力的勘探层系。通过多种地震属性和地震反演技术的应用以及地震相分析,落实了一批构造、岩性—地层圈闭,为老油田的勘探找到了接替战场。     

GSM无线公话产品中的干扰研究

GSM90 0 /1 80 0固定无线公用电话桌面型话机在开发过程中遇到严重的噪音问题 ,一度成为开发工作的瓶颈。本文就这一噪音问题进行了分析与测试 ,并针对干扰源采取相应的措施 ,在产品开发中付诸应用 ,最终解决了 GSM桌面型无线公话的噪音问题     

超宽带极窄脉冲设计与产生

超宽带(UWB)技术是以持续时间极短的脉冲作为传输载体进行数据通信的无线新技术。基于BJT雪崩特性,本文采用并行同时触发的工作方式,设计并产生了高重复速率的UWB脉冲电路发生器,极大地减少了时延,缩短了上升时间,提高了脉冲的幅度,并从等效电路法的观点分析计算了脉冲的特性参数,理论结果与实测结果具有较好的一致性。     

Windows2000环境下实时控制系统的软件实现

文章介绍了在windows2000环境下通过编写WDM（Windows Driver Model）设备驱动程序实现实时数据采集和控制的一种方法。采用研华数据采集卡PCL818L产生中断信号．通过编写WDM驱动程序实现了在windows2000环境下转台的位置控制。并在实验中调试通过。实验结果表明：在采样频率为1KHz的情况下。控制系统很好实现了输出对输入的跟踪，证明了采用方法的正确性。该方法解决了windows2000环境下的实时性问题，为在windows环境下实时控制系统的实现提供了有益的尝试。     

协同工作式非线性编辑网络的解决方案

通过对一种非线性编辑网络解决方案的探讨,分别从软件、硬件、网络、工作方式等方面阐述了协同工作式非线性编辑技术.     

Segmented polymer networks containing amino‐dendrimers

Polymer networks in which poly(propylene imine) dendrimers (Astramol?) are connected to each other by linear polytetrahydrofuran (polyTHF) segments, were prepared by two methods. The first method was a one‐step procedure in which bifunctionally living polyTHF, obtained by initiation of the THF polymerization with trifluoromethane sulfonic anhydride (triflic anhydride), was reacted with an amino‐dendrimer. This reaction was very fast but did not allow formation of the end products. The second method was a two‐step procedure. In a first step, living polyTHF, prepared with acryloyloxybutyl triflate as initiator, was grafted on an amino‐dendrimer, to form a star‐like, acrylate‐terminated polyTHF multi‐macromonomer with the dendrimer as core. In a second step, networks were obtained by Michael addition between the acrylate end‐groups and unreacted amino‐groups of the dendrimer. This cross‐linking reaction occurred spontaneously upon heating of the solution of the multi‐macromonomer with gelation times varying from a few minutes to a few hours, depending on the temperature and the composition of the prepolymers. With this method it was possible to prepare networks in the form of coatings or films. © 2003 Society of Chemical Industry     

An optimization model for placement of wavelength converters to minimize blocking probability in WDM networks

The introduction of wavelength converters in wavelength division multiplexing (WDM) networks can reduce the blocking probabilities of calls. In this paper, we study the problem of placing a given number of converters in a general topology WDM network such that the overall system blocking probability is minimized. The original contributions of this work are the following: 1) formulation of success probability in a network as a polynomial function of the locations of converters; 2) proposal of an optimization model of the converter placement problem as the minimization of a polynomial function of 0-1 variables under a linear constraint, so that standard optimization tools can be employed to solve the problem; and 3) design of a search algorithm that can efficiently find the optimal solution to the converter placement problem. Experiments have been conducted to demonstrate the effectiveness of the proposed model and the efficiency of the algorithm.     

东江干流河道来沙量变化分析及泥沙沉积量计算

在对东江干流来水来沙的特性以及东江干流河道梯级枢纽建成前后河道的水沙变化进行分析的基础上,进行了东江干流河道泥沙沉积量的分析计算,为东江干流河道采砂控制规划提供科学依据。     

阀门产品图形与数据的计算机管理

阀门产品具有种类、规格多，应用面广的特点。采用产品结构树形式作为系统数据存放结构，用VB套装数据、图形软件，Solidworks软件进行实体造型及参数化设计，3DMAX软件进行渲染、动画，采用ACCESS软件作为产品数据库。根据产品数据模式，建立一个实用的阀门图形与数据的计算机管理系统，帮助用户正确使用阀门产品，为计算机辅助设计提供支持。