重馏分油加氢脱氮反应动力学模型的研究

简要地介绍了一些典型的模型氮化物的ＨＤＮ反应规律。根据胜利ＶＧＯ在３７２２Ｂ催化剂上的大量ＨＤＮ实验数据，提出了如下的ＨＤＮ基本反应动力学方程：ｄＣＮｄｔ＝－ｋ１＋Ｋ＊ＣＮＣＮＰＨ２为了扩大上式的应用范围，详细分析了各种因素（如原料油种类和馏程及Ｈ２Ｓ等）对ＨＤＮ的影响，并开发了相应的经验关联式，从而得到了一个较完整的馏分油ＨＤＮ反应动力学模型。验证实验表明，该模型是成功的。     

Interleukin 4, interferon-gamma, and prostaglandin E impact the osteoclastic cell-forming potential of murine bone marrow macrophages

Interleukin 4 (IL-4) is an immune cytokine that inhibits bone resorption in mice and suppresses osteoclastic cell formation in vitro through an undefined mechanism. In this report, we have established the cellular identity of the IL-4 target cell using a variety of bone marrow/stromal cell coculture methods. Initially, we found that the majority of IL-4's inhibition of osteoclastic cell formation was due to its effect on bone marrow cells, not stromal cells. Consequently, bone marrow macrophages were used as osteoclastic cell progenitors after they had been transiently exposed to IL-4 (48 h), before the addition of stromal cells, 1,25-dihydroxyvitamin D3, and dexamethasone. In this circumstance, IL-4 impaired subsequent osteoclastic cell formation, suggesting that the macrophage may be potentially targeted by many factors known to influence osteoclast formation. Consequently, we discovered that interferon-gamma (IFN gamma), prostaglandin E (PGE), and cell-permeant cAMP analogs also impacted osteoclastic cell formation when used to selectively treat bone marrow macrophages. IFN gamma suppressed osteoclastic cell formation, whereas PGE and cAMP analog treatment led to the formation of significantly enlarged osteoclastic cells. Importantly, PGE antagonized the inhibitory effects of both IL-4 and IFN gamma on the osteoclastic cell-forming potential of bone marrow macrophages. Collectively, these findings establish bone marrow macrophages as osteoclastic cell precursors with the degree of their commitment to the osteoclast pathway sensitive to the effects of soluble mediators, including IL-4, IFN gamma, and PGE.     

Cytoplasmic tail deletion of T cell receptor (TCR) beta-chain results in its surface expression as glycosylphosphatidylinositol-anchored polypeptide on mature T cells in the absence of TCR-alpha

Surface expression of the T cell antigen receptor (TCR) in mature T cells requires the association of a variable heterodimer (alpha.beta or gamma.delta) with six invariant CD3 polypeptides (gamma, delta, epsilon-epsilon, zeta-zeta, or zeta-eta). We described here that deletion of the cytoplasmic tail polypeptide sequence (Lys-Lys-Lys-Asn-Ser) of TCR beta-chain (beta CT) results in expression of the truncated beta-chain on the surface of a mature T cell hybridoma line, in the absence of TCR-alpha, as a glycophosphatidylinositol (GPI)-anchored monomeric polypeptide. The GPI-anchored TCR-beta CT is not associated with CD3-epsilon and is incapable of conventional signal transduction. Association with TCR-alpha prevents beta CT from GPI-linkage formation. The alpha beta CT heterodimer binds the CD3 polypeptides, and the resultant TCR alpha beta CT/CD3 complex is capable of signal transduction. Our data show that a signal sequence for GPI-linkage formation is present in TCR-beta, and this alternative membrane anchoring mechanism can be utilized by beta-chain polypeptide lacking the CT sequence. We conclude therefore that in the absence of TCR-alpha expression, the beta-chain CT sequence plays an essential function in hindering GPI-linkage formation, thereby preventing escape of incompletely assembled TCR beta-chain to the cell surface of mature T cells.     

HAP陶瓷合成的研究

本文对生物陶瓷材料－羟基磷灰石的合成进行了研究。试验将激光合成与湿法合成对比分析，着重探讨了在激光辐照下生物陶瓷的形貌，粒度，化学组成和结构等的变化规律，对激光涂敷生物陶瓷涂层有一定的指导意义。     

CIMS装配和拆卸生产线的可靠性分析

本文对ＣＩＭＳ装配线和拆卸线的可靠性问题进行研究。文中分析了它们的运行状况，求出了两种生产线的稳态可用度，并用一个例子加以说明。     

非串行生产线的建模,分析及设计

本文利用等效工作站理论和工件流平衡原理，推导出非串行离散事件生产线可以等价于串联系统，并归结为装配和拆卸两条定理，解决了系统的建模、分析与设计问题。     

Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

井站安全培训之问题与对策

目前采气井站的安全教育培训工作取得了一定成绩,但也存在不少问题。针对这些问题,提出了3点对策建议:制定长期系统的安全培训计划;建立教育培训信息反馈机制;培训方法不断改进与创新。     

斜井抽油系统优化设计技术研究及应用

结合斜井井身轨迹特点,建立了斜井三维井眼中杆柱轴向载荷和侧向载荷计算数学模型,给出扶正器间距和加重杆配置的计算方法;应用系统工程分析方法,给出系统参数设计的步骤,形成了斜井有杆泵抽油系统抽汲参数优化设计方法,编制了相应的优化设计软件。现场应用实例表明,该优化设计方法理论正确可靠,根据本方法编制的斜井抽油系统优化设计软件用于现场设计,可达到有效降低管杆偏磨,减小悬点载荷,提高油井产量、泵效和井下系统效率之目的。     

Complete mobile email management

Years have lapsed since the inauguration of the first Wireless Application Protocol (WAP) application. One of the main reasons for the lukewarm response so far may be attributed to the lack of a “Killer” application. Many companies and developers have attempted to replicate email services (an Internet Killer appplication) within the WAP realm, but till now, no significant success has been reported. This paper will first discuss on the key functions which are lacking in the present WAP-email service, and which are arguably necessary if a much larger user base is to be attracted to these services. A new system will be proposed which can enable the user to send files residing in a remote personal computer (PC) as attachments to his emails using WAP-enabled mobile devices. The implementation of the system will be presented in details. Issue relating to the connection to various types of email servers and the security of the system will also be addressed in the paper.