Processing of ethanol fermentation broths by Candida krusei to separate bioethanol by pervaporation using silicone rubber‐coated silicalite membranes

BACKGROUND: Pervaporation employing ethanol‐permselective silicalite membranes as an alternative to distillation is a promising approach for refining low‐concentration bioethanol solutions. However, to make the separation process practicable, it is extremely important to avoid the problems caused by the adsorption of succinate on the membrane during the separation process. In this work, the pervaporation of an ethanol fermentation broth without succinate was investigated, as well as the influence of several fermentation broth nutrient components. RESULTS: Candida krusei IA‐1 produces an extremely low level of succinate. The decrease in permeate ethanol concentration through a silicone rubber‐coated silicalite membrane during the separation of low‐succinate C. krusei IA‐1 fermentation broth was significantly improved when compared with that obtained using Saccharomyces cerevisiae broth. By treating the fermentation broth with activated carbon, bioethanol was concentrated as efficiently as with binary mixtures of ethanol/water. The total flux was improved upto 56% of that obtained from the separation of binary mixtures, compared with 43% before the addition of activated carbon. Nutrients such as peptone, yeast extract and corn steep liquor had a negative effect on pervaporation, but this response was distinct from that caused by succinate. CONCLUSION: For consistent separation of bioethanol from C. krusei IA‐1 fermentation broth by pervaporation, it is useful to treat the low nutrient broth with activated carbon. To further improve pervaporation performance, it will be necessary to suppress the accumulation of glycerol. Copyright © 2009 Society of Chemical Industry     

Recombinant Long-Acting Thioredoxin Ameliorates AKI to CKD Transition via Modulating Renal Oxidative Stress and Inflammation

An effective strategy is highly desirable for preventing acute kidney injury (AKI) to chronic kidney disease (CKD) transition. Thioredoxin-1 (Trx), a redox-active protein that has anti-oxidative and anti-inflammatory properties, would be a candidate for this but its short half-life limits its clinical application. In this study, we examined the renoprotective effect of long-acting Trx that is comprised of human albumin and Trx (HSA-Trx) against AKI to CKD transition. AKI to CKD mice were created by renal ischemia-reperfusion (IR). From day 1 to day 14 after renal IR, the recovery of renal function was accelerated by HSA-Trx administration. On day 14, HSA-Trx reduced renal fibrosis compared with PBS treatment. At the early phase of fibrogenesis (day 7), HSA-Trx treatment suppressed renal oxidative stress, pro-inflammatory cytokine production and macrophage infiltration, thus ameliorating tubular injury and fibrosis. In addition, HSA-Trx treatment inhibited G2/M cell cycle arrest and apoptosis in renal tubular cells. While renal Trx protein levels were decreased after renal IR, the levels were recovered by HSA-Trx treatment. Together, HSA-Trx has potential for use in the treatment of AKI to CKD transition via its effects of modulating oxidative stress and inflammation.     

Removal of polonium from stainless steel surface contaminated by neutron irradiated lead-bismuth eutectic

Lead-bismuth eutectic (LBE) has good characteristics for the coolant and/or target of various nuclear systems, but it also has a problem of polonium contamination. In the study, baking experiment was performed to remove polonium contamination on type 316 stainless steel plate that was originated from neutron irradiated LBE. The contaminated type 316 stainless steel plate was baked in a vacuum condition at various temperatures from 200°C to 600°C. In the previous preliminary study, the effect of short time baking was investigated. In the study, the effect of long time baking was investigated. The detail of the experimental method was also described. The result of long time baking experiment showed that the baking method was effective for removal of polonium from stainless steel surface contaminated by neutron irradiated LBE, if the baking was performed at 500°C and higher in a vacuum condition. The obtained result was consistent to the previous preliminary study.     

Experimental study of the flow in helical circular pipes: Torsion effect on the flow velocity and turbulence

An objective of the present paper is to experimentally clarify the torsion effect on the flow in helical circular pipes. We have made six helical circular pipes having different pitches and common non-dimensional curvature δ of about 0.1. The torsion parameter β0, which is defined by β0 = τ/（2δ）1/2 with non-dimensional torsion r, are taken to be 0.02, 0.45, 0.69, 1.01, 1.38 and 1.89 covering from small to very large pitch. The velocity distributions and the turbulence of the flow are measured using an X-type hot-wire anemometer in the range of the Reynolds number from 200 to 20000. The results obtained are summarized as follows： The mean secondary flow pattern in a cross section of the pipe changes from an ordinary twin-vortex type as is seen in a curved pipe without torsion （toroidal pipe） to a single vortex type after one of the twin-vortex gradually disappears as β0 increases. The circulation direction of the single vortex is the same as the direction of torsion of the pipe. The mean velocity distribution of the axial flow is similar to that of the toroidal pipe at small β0, but changes its shape as β0 increases, and attains the shape similar to that in a straight circular pipe when ,β0 = 1.89. It is also found that the critical Reynolds number, at which the flow shows a marginal behavior to turbulence, decreases as ,β0 increases for small ,β0, and then increases after taking a minimum at ,β0 ≈ 1.4 as ,β0 increases. The minimum of the critical Reynolds number experimentally obtained is about 400 at ,β0 ≈ 1.4.     

Application of a chromium‐free photoresist to CRT screen processing

In 1998, Toyo Gosei Co. published a paper on the development of a new water‐soluble photopolymer of high sensitivity, PVA‐ARBB. In close co‐operation with LG. Philips Displays, the new material was further developed to be applicable in patterning the phosphor layer of a CRT screen. The new material shows about 3 times higher light sensitivity, gives 4–5% higher luminance, has no dark reaction, and is chromium‐free. It is the first chromium‐free photoresist used for phosphor patterning in CRT mass production. A comparison is presented between the conventional resist and the new resist. A survey is given of the most important process conditions.     

Future of international cooperative activity for graduate school education in nuclear field

Further improvement of graduate school education in nuclear field is one of the important issues in universities in nuclear field. The COE-INES program has performed international cooperative activities for graduate school education with foreign universities in nuclear field. There are a lot of possibilities in international cooperation with foreign universities for graduate school education. The use of Internet can be a strong tool for the activities.     

Geometric control and tuneable pore size distribution of buckypaper and buckydiscs

The fabrication of buckypaper from unfunctionalised multi-walled carbon nanotubes (MWCNTs) without the aid of surfactants or surface modification techniques is accomplished through a novel and quick frit compression method. The dimensions can be controlled through the size of the syringe housing and the through the mass of carbon nanotubes added. Their thicknesses are typically much larger than surfactant-cast buckypaper and range from 120 μm up to 650 μm; buckypaper with thicknesses larger than 500 μm we call buckydiscs. Buckypaper and buckydiscs are mechanically robust to handle, flexible, stable in solvents and possess larger porosities than Triton-X100 cast buckypaper. They also exhibit a memory effect when bending wetted samples, returning to their former geometry on drying. Buckypaper and buckydiscs were studied by mercury intrusion porosimetry to reveal a defined distribution of mesopores and small macropores that is, along with their density and apparent free volume, dependant on the casting solvent and therefore tuneable. Moreover, the frit compression system also allows control over the 3-dimensional geometry of the buckydiscs during the casting process.     

Cognitive deficits in docosahexaenoic acid-deficient rats.

This study investigated the influence of brain docosahexaenoic acid (DHA) deficiency on simple and complex olfactory-based learning and memory in 2nd generation (F2) adult male rats. Rats raised and maintained on either an n-3-adequate or an n-3-deficient diet were tested for acquisition of an olfactory learning set and an olfactory memory task, and for motivation to obtain a water reward. Despite a 76% decrease in brain DHA, n-3-deficient rats were able to acquire most simple 2-odor discrimination tasks but were deficient in the acquisition of a 20-problem olfactory learning set. This deficit could not be attributed to changes in sensory capacity but, instead, appeared to represent a deficit in higher order learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

DyP-Type Peroxidases: Recent Advances and Perspectives

In this review, we chart the major milestones in the research progress on the DyP-type peroxidase family over the past decade. Though mainly distributed among bacteria and fungi, this family actually exhibits more widespread diversity. Advanced tertiary structural analyses have revealed common and different features among members of this family. Notably, the catalytic cycle for the peroxidase activity of DyP-type peroxidases appears to be different from that of other ubiquitous heme peroxidases. DyP-type peroxidases have also been reported to possess activities in addition to peroxidase function, including hydrolase or oxidase activity. They also show various cellular distributions, functioning not only inside cells but also outside of cells. Some are also cargo proteins of encapsulin. Unique, noteworthy functions include a key role in life-cycle switching in Streptomyces and the operation of an iron transport system in Staphylococcus aureus, Bacillus subtilis and Escherichia coli. We also present several probable physiological roles of DyP-type peroxidases that reflect the widespread distribution and function of these enzymes. Lignin degradation is the most common function attributed to DyP-type peroxidases, but their activity is not high compared with that of standard lignin-degrading enzymes. From an environmental standpoint, degradation of natural antifungal anthraquinone compounds is a specific focus of DyP-type peroxidase research. Considered in its totality, the DyP-type peroxidase family offers a rich source of diverse and attractive materials for research scientists.     

A statistical evaluation of the free energy of Fe-base ternary ordering alloys

The free energy of the Fe-base ternary ordering alloys whereB2 andD0₃ ordered structures are formed is evaluated. The statistical theory is employed using a pairwise interaction approximation taking into account not only the atomic interaction but also the magnetic interaction, based upon the Bragg-Williams-Gorsky model. The application of this model on Fe-Si-Co ordering alloys are demonstrated. The propriety of the calculation results are performed by comparing the experimental results. The influences of the magnetic energy to the stability of ordered structures are also demonstrated.