Lithium-deficient LiYMn2O4 spinels (0.9 ≤ Y < 1): Lithium content, synthesis temperature, thermal behaviour and electrochemical properties

Lithium-deficient Li_YMn₂O₄ spinels (LD-Li_YMn₂O₄) with nominal composition (0.9 ≤ Y < 1) have been synthesized by melt impregnation from Mn₂O₃ and LiNO₃ at temperatures ranging from 700 °C to 850 °C. X-ray diffraction data show that LD-Li_YMn₂O₄ spinels are obtained as single phases in the range Y = 0.975-1 at 700 °C and 750 °C. Morphological characterization by transmission electron microscopy shows that the particle size of LD-Li_YMn₂O₄ spinels increases on decreasing the Li-content. The influence of the Li-content and the synthesis temperature on the thermal and electrochemical behaviours has been systematically studied. Thermal analysis studies indicate that the temperature of the first thermal effect in the differential thermal analysis (DTA)/thermogravimetric (TG) curves, T_C1, linearly increases on decreasing the Li-content. The electrochemical properties of LD-Li_YMn₂O₄ spinels, determined by galvanostatic cycling, notably change with the synthesis conditions. So, the first discharge capacity, Q_disch., at C rate increases on rising the Li-content and the synthesis temperature. The sample Li_0.975Mn₂O₄ synthesized at 700 °C has a Q_disch. = 123 mAh g⁻¹ and a capacity retention of 99.77% per cycle. This LD-Li_YMn₂O₄ sample had the best electrochemical characteristics of the series.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.     

Synthesis,structure, and characterization of the thorium zirconolite CaZr1-xThxTi2O7 system

A series of zirconolite ceramics with composition CaZr_1-xTh_xTi₂O₇ (Δx = 0.10) were reactively sintered at 1350°C for 20 h, in air (0 ≤ x ≤ 0.60) and 5% H₂/N₂ (0 ≤ x ≤ 0.40). A sample with composition corresponding to x = 0.20 was also produced by hot isostatic pressing (HIP) at 1300°C and 100 MPa for 4 hours. Th⁴⁺ immobilization was most readily achieved under oxidizing conditions, with Th⁴⁺ preferentially incorporated within a pyrochlore-structured phase in the range 0.10 ≤ x ≤ 0.50, yet formation of the zirconolite-4M polytype was not observed. We report the novel synthesis of single-phase pyrochlore with nominal composition CaZr_0.40Th_0.60Ti₂O₇ when targeting x = 0.60. Th⁴⁺ incorporation under reducing conditions produced a secondary Th-bearing perovskite, comprising 24.2 ± 0.6 wt% of the phase assemblage when targeting x = 0.40, alongside 8.8 ± 0.3 wt% undigested ThO₂. Under reducing conditions, powder XRD data were consistent with zirconolite adopting the 3T polytype structure. The sample produced by HIP presented a nonequilibrium phase assemblage, yielding a major phase of zirconolite-2M alongside accessory Th⁴⁺-bearing phases ThTi₂O₆, ThO₂, and perovskite. These data highlight the efficacy of Th⁴⁺ as a Pu⁴⁺ surrogate, with implications for the formation of Zr-stabilized Th-pyrochlore phases as matrices for waste with elevated Th⁴⁺ content.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.     

Cellulose nanocrystal-mediated assembly of graphene oxide in natural rubber nanocomposites with high electrical conductivity

This study reports a green and powerful strategy for preparing cellulose nanocrystal (CNC)/graphene oxide (GO)/natural rubber (NR) nanocomposites hosting a 3D hierarchical conductive network. Due to good dispersibility and amphiphilic nature of CNC, well dispersed CNC/GO nanohybrids were prepared. Hydrogen bonding interactions between CNC and GO greatly enhanced the stability of the CNC/GO nanohybrids. CNC/GO nanohybrids were introduced into NR latex under sonication and the mixture was cast. Self-assembled CNC/GO nanohybrids preferentially dispersed in the interstice between latex microspheres allowing the construction of a 3D hierarchical conductive network. By combining strong hydrogen bonds and 3D conductive network, both electrical conductivity and mechanical properties (tensile strength and modulus) have been significantly improved. The electrical conductivity of the nanocomposite with 4 wt% GO and 5 wt% CNC exhibited an increase of nine orders of magnitude compared to the nanocomposite with only 4 wt% GO; meanwhile, the electrical percolation threshold was 3-fold lower than for NR/GO composites.     

Defense Suppression through Interplant Communication Depends on the Attacking Herbivore Species

In response to herbivory, plants emit volatile compounds that play important roles in plant defense. Herbivore-induced plant volatiles (HIPVs) can deter herbivores, recruit natural enemies, and warn other plants of possible herbivore attack. Following HIPV detection, neighboring plants often respond by enhancing their anti-herbivore defenses, but a recent study found that herbivores can manipulate HIPV-interplant communication for their own benefit and suppress defenses in neighboring plants. Herbivores induce species-specific blends of HIPVs and how these different blends affect the specificity of plant defense responses remains unclear. Here we assessed how HIPVs from zucchini plants (Cucurbita pepo) challenged with different herbivore species affect resistance in neighboring plants. Volatile “emitter” plants were damaged by one of three herbivore species: saltmarsh caterpillars (Estigmene acrea), squash bugs (Anasa tristis), or striped cucumber beetles (Acalymma vittatum), or were left as undamaged controls. Neighboring “receiver” plants were exposed to HIPVs or control volatiles and then challenged by the associated herbivore species. As measures of plant resistance, we quantified herbivore feeding damage and defense-related phytohormones in receivers. We found that the three herbivore species induced different HIPV blends from squash plants. HIPVs induced by saltmarsh caterpillars suppressed defenses in receivers, leading to greater herbivory and lower defense induction compared to controls. In contrast, HIPVs induced by cucumber beetles and squash bugs did not affect plant resistance to subsequent herbivory in receivers. Our study shows that herbivore species identity affects volatile-mediated interplant communication in zucchini, revealing a new example of herbivore defense suppression through volatile cues.

     

Students Weigh In: Usability Test of Online Library Tutorials

Librarians can improve their online tutorials by borrowing usability testing techniques from the computer science field to improve the human-computer interface. This study involved a multimethod usability test of librarian-created tutorials to determine what students learned, how they felt on several affective questions, and what they suggested for improving the tutorials. Results of pre- and post-tests showed that student knowledge increased, and surveys and focus group findings lean to several suggestions for improving engagement and placing tutorials where they will be most effective. This case study demonstrates the value of user input to improve the effectiveness of online instruction for information literacy.     

Optics clustered to output unique solutions: a multi-laser facility for combined single molecule and ensemble microscopy

Optics clustered to output unique solutions (OCTOPUS) is a microscopy platform that combines single molecule and ensemble imaging methodologies. A novel aspect of OCTOPUS is its laser excitation system, which consists of a central core of interlocked continuous wave and pulsed laser sources, launched into optical fibres and linked via laser combiners. Fibres are plugged into wall-mounted patch panels that reach microscopy end-stations in adjacent rooms. This allows multiple tailor-made combinations of laser colours and time characteristics to be shared by different end-stations minimising the need for laser duplications. This setup brings significant benefits in terms of cost effectiveness, ease of operation, and user safety. The modular nature of OCTOPUS also facilitates the addition of new techniques as required, allowing the use of existing lasers in new microscopes while retaining the ability to run the established parts of the facility. To date, techniques interlinked are multi-photon/multicolour confocal fluorescence lifetime imaging for several modalities of fluorescence resonance energy transfer (FRET) and time-resolved anisotropy, total internal reflection fluorescence, single molecule imaging of single pair FRET, single molecule fluorescence polarisation, particle tracking, and optical tweezers. Here, we use a well-studied system, the epidermal growth factor receptor network, to illustrate how OCTOPUS can aid in the investigation of complex biological phenomena.