An Application of Computer‐Aided Molecular Design (CAMD) Using the Signature Molecular Descriptor–Part 2. Evaluating Newly Identified Surface Tension‐Reducing Substances for Potential Use as Shrinkage‐Reducing Admixtures

In this study, the use of computer‐aided molecular design (CAMD) is validated as a tool for enabling the discovery of new shrinkage‐reducing compounds for possible use in portland cement composites and is framed as one of many multiscale modeling tools in a broad hierarchy of possibilities. Twelve additives were tested for their ability to inhibit shrinkage in Type I ordinary portland cement under both autogenous and drying conditions. The 12 additives included two commercial shrinkage‐reducing admixtures (SRAs), two active ingredients of a commercial admixture [one of which was used to establish the quantitative structure–property relationships (QSPR)], two additional classified as potential SRA compounds based on the patent literature, four newly identified compounds predicted by using CAMD and an inverse quantitative structure–property relationship (I‐QSPR), and two other compounds use to establish the QSPR relationship. The newly identified I‐QSPR compounds were targeted for their ability to reduce the surface tension of water, a primary consideration for shrinkage‐reducing activity. Results for both drying shrinkage and autogenous shrinkage indicate that the designed compounds perform similar to commercial admixtures, yet have different chemical functionalities. Hydration data and set measurements were also considered since selection of new SRAs is a multiparameter problem with many constraints. Thus, these newly identified shrinkage‐reducing compounds can potentially provide additional options for use in portland cement concrete applications.     

Two-Step Processing Method for Blending High-Performance Polymers with Notable Thermal and Rheological Differences: PEI and PBT

Blends between high-performance polymers (HPP) are barely studied, especially those produced by melting processing. In this work, it is proposed a novel methodology to prepare blends between polymers with notable processing temperature differences: poly(ether imide) (PEI) and poly(butylene terephthalate) (PBT). Processing parameters are settled after thermal and rheological evaluation of pure materials, those results suggest these blends need to be produced by steps. It is found a synergistic effect such as lowering PEI processing temperature and reducing PBT hydrolysis at high temperatures. Propose methodology allows to produce blends between HPP in the whole composition range with the same processing conditions.     

Probiotics: An alternative strategy for combating salmonellosis: Immune mechanisms involved

Salmonella produces infections of different nature and severity depending of many factors including the Salmonella serovar involved, strain virulence, infective dose, host animal species, age and immune status of the host. The treatments against Salmonella infections rely on supportive and antibiotic therapy to eliminate the pathogen, but the development of resistance by Salmonella to the antimicrobials most commonly used limits its efficacy. Other disadvantages of antibiotic treatments are that they can lead to acute diarrhea (antimicrobials normally induce an imbalance of intestinal bacterial flora) and may produce chronic toxicity. Considering this undesired consequences of antibiotics and because at the present there are no effective oral vaccines which protect against salmonellosis, scientists have been searching for alternative methods to control enteric infections. In the present review, probiotics are proposed as an attractive possibility to attend this concern. Probiotic are live microorganisms, which when administered in adequate amounts confer a health benefit on the host. In vitro and in vivo studies showed the effectiveness of probiotic administration in the prevention or in the treatment against Salmonella infection. There are several mechanisms by which probiotic strains might exert their effects. They include non immune mechanisms (stabilization of the gut mucosal barrier, competition for adhesion, secretion of antimicrobial substances, etc.) and the modulation of the mucosal and systemic immune responses. These mechanisms are species and/or strain specific. There are also evidences that in some cases, a mix of probiotic strains can be more useful than each strain alone against this infection. In addition, the presence of one or more probiotic strains in a fermented product can improve the beneficial properties of the probiotic strains involved. It was also reviewed the security of probiotics administration after Salmonella infection in healthy host and in immunosuppressed or babies hosts. Although, the major part of the researches were performed in animal models through in vivo assays or by in vitro studies using human cell lines, some studies carried out in humans to verify the probiotic effects were also addressed in the present review. Nevertheless, is of critical importance to perform more clinical trials in humans to validate the results obtained with each specific probiotic strain or probiotic product.     

A Novel Insight into the Cardiotoxicity of Antineoplastic Drug Doxorubicin

Doxorubicin is a commonly used antineoplastic agent in the treatment of many types of cancer. Little is known about the interactions of doxorubicin with cardiac biomolecules. Serious cardiotoxicity including dilated cardiomyopathy often resulting in a fatal congestive heart failure may occur as a consequence of chemotherapy with doxorubicin. The purpose of this study was to determine the effect of exposure to doxorubicin on the changes in major amino acids in tissue of cardiac muscle (proline, taurine, glutamic acid, arginine, aspartic acid, leucine, glycine, valine, alanine, isoleucine, threonine, lysine and serine). An in vitro interaction study was performed as a comparison of amino acid profiles in heart tissue before and after application of doxorubicin. We found that doxorubicin directly influences myocardial amino acid representation even at low concentrations. In addition, we performed an interaction study that resulted in the determination of breaking points for each of analyzed amino acids. Lysine, arginine, β-alanine, valine and serine were determined as the most sensitive amino acids. Additionally we compared amino acid profiles of myocardium before and after exposure to doxorubicin. The amount of amino acids after interaction with doxorubicin was significantly reduced (p = 0.05). This fact points at an ability of doxorubicin to induce changes in quantitative composition of amino acids in myocardium. Moreover, this confirms that the interactions between doxorubicin and amino acids may act as another factor most likely responsible for adverse effects of doxorubicin on myocardium.     

Migration of α-tocopherol from LDPE films to corn oil and its effect on the oxidative stability

The migration of α-tocopherol (α-T) from low density polyethylene (LDPE) films, added with 20 (film A) and 40 mg g^?1 (film B) to corn oil for 12 weeks at 5, 20 and 30 °C was determined. A LDPE film added with no α-T was used as control (film C). Diffusion coefficient (D) values for the film A system were 1.4 × 10^?11, 7.1 × 10^?11 and 30.3 × 10^?11 cm² s^?1 at 5, 20 and 30 °C, respectively. Meanwhile, D values for the film B system were 1.3 × 10^?11, 9.6 × 10^?11 and 51.1 × 10^?11 cm² s^?1 at the same temperatures. The activation energy (E_a) for the diffusion of α-T was 126.5 (film A) and 105.9 kJ mol^?1 (film B). The effect of the migration of α-T on the oxidative stability of corn oil was evaluated by monitoring hexanal content by solid phase micro-extraction (SPME) and gas chromatography. The hexanal content in the oil showed that both films added with α-T resulted suitable to maintain the oxidative stability of the oil for about 16 weeks at 30 °C, compared to 12 weeks for the oil in contact with the film C.     

Formation of mesoglobules in aqueous media from thermo-sensitive poly(ethoxytriethyleneglycol acrylate)

A series of six poly(ethoxytriethyleneglycol acrylate) (PETEGA) homopolymers were synthesized by atom transfer radical polymerization, reversible addition-fragmentation transfer polymerization, and anionic polymerization in order to cover a molecular weight range from 7,000 to 40,000 Da. The polymers exhibited a lower critical solution temperature (LCST) behavior in water, which was observed by the occurrence of a cloud point (CP) at around 35 °C. The transmittance of visible light versus temperature dependence overlapped during the cooling and the heating cycles, showing almost a complete lack of hysteresis. Moreover, instead of the occurrence of an uncontrolled macroscopic phase separation, stable colloidal aggregates (mesoglobules) of narrow distribution in particle size were formed in water at temperatures above the LCST of PETEGA at 1 g L⁻¹ solutions. The dimensions of the mesoglobules ranged from 91 to 235 nm, and particle size was not influenced by the molecular weight of PETEGA. Temperature changes caused considerable variations of the mesoglobules dimensions, which were smaller at higher temperatures. The addition of an anionic surfactant simultaneously increased the CP values by 4–6 °C and lowered the dimensions of the mesoglobules.     

Decision making and set shifting impairments are associated with distinct symptom dimensions in obsessive-compulsive disorder.

Obsessive- compulsive disorder (OCD) is clinically heterogeneous. The authors examined how specific OCD symptom dimensions were related to neuropsychological functions using multiple regression analyses. A total of 39 OCD patients and 40 controls completed the Iowa Gambling Task (IGT; A. Bechara, A. R. Damasio, H. Damasio, & S. W. Anderson, 1994), which is a test of decision making, and the Wisconsin Card Sorting Test (R. K. Heaton, 1981), which is a test of set shifting. OCD patients and controls showed comparable decision making. However, patients with prominent hoarding symptoms showed impaired decision making on the IGT as well as reduced skin conductance responses. OCD patients had poorer set shifting abilities than controls, and symmetry/ordering symptoms were negatively associated with set shifting. These results help explain previous inconsistent findings in neuropsychological research in OCD and support recent neuroimaging data showing dissociable neural mechanisms involved in mediating the different OCD symptom dimensions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Molecular weight characteristics of humic substances from different environments as determined by size exclusion chromatography and their statistical evaluation

Recorded molecular weights (MWs) for humic substances (HS) range from a few hundred to millions of daltons. For purposes of defining HS as a specific class of chemical compounds, it is of particular importance to ascertain if this broad range of MWs can be attributed to actual variability in molecular properties or is simply an artifact of the analytical techniques used to characterize HS. The main objectives of this study were (1)to establish if a preferential range of MWs exists for HS and (2) to determine any consistent MW properties of HS. To reach the goal, we have undertaken an approach to measure under standardized conditions the MW characteristics of a large set of HS from different natural environments. Seventy-seven humic materials were isolated from freshwater, soil, peat, and coal, such that each possessed a different fractional composition: humic acid (HA), fulvic acid (FA), and a nonfractionated mixture of HA and FA (HF). Size exclusion chromatography (SEC) was used as the analytical technique to determine molecular weight characteristics. The MW distributions were characterized by number (Mn) and weight (Mw) average MW, and by polydispersity. The complete range of Mw values varied within 4.7-30.4 kDa. The maximum Mw values were observed for peat HF and soil HA, whereas the smallest weights were measured for river water HF. Maximum values of polydispersity (3.5-4.4) were seen for peat HF and soil HA, while much lower values (1.6-3.1) were found for all preparations isolated with XAD-resins. Statistical evaluation showed consistent Mw and Mn variations with the HS source, while polydispersity was mostly a function of the isolation procedure used. A conclusion was made that HS have a preferential range of MW values that could characterize them as a specific class of chemical compounds.     

Enhancement of magnetic losses in hybrid polymer composites with MnZn-ferrite and conductive fillers

Polymer composites (PCs) with a polyurethane (PU) matrix filled with magnetic filler (MnZn ferrite) and hybrid polymer composites (HPCs) consisting of this magnetic filler and various types of conductive fillers (carbon black, carbon fibers, aluminum powder, polypyrrole) are prepared. The matrix structure of a HPC is formed (i) by a polymer filled with conductive filler, which forms the skeleton of an infinite cluster, and (ii) by ferrite particles that are larger than conductive particles. Thus, an HPC represents an ensemble of ferrite particles each of which is surrounded by a conductive medium and can be considered as a “core–shell” structure. The development of a core–shell structure is evidenced by the lower electric percolation threshold in an HPC compared with that in PU filled with conductive filler. Magnetic and dielectric spectra of PCs and HPCs are studied in the frequency range from 1 MHz to 10 GHz. Hybrid systems exhibit a considerable enhancement of magnetic losses compared with PCs. The enhancement of magnetic losses in HPCs is due to the conduction currents that are induced in the conductive shell by a microwave magnetic field.