Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

The effect of CaF<Subscript>2</Subscript> on thermodynamics of CaO-CaF<Subscript>2</Subscript>-SiO<Subscript>2</Subscript>(-MgO) slags

To address the role of CaF₂ in the CaO-CaF₂-SiO₂(-MgO) slag system employed for the production of low-pressure rotor steels, the thermodynamic aspects of the slag were investigated by equilibrating it with liquid iron at 1873 K in CaO or MgO crucibles. Presaturation of slag with an oxide block piece of CaO or MgO in a Pt crucible and application of a carbon paste to the outside of an oxide crucible were designed to prevent crucible failure during the slag-metal experiments. The liquidus isotherm and phase boundary of the preceding slag system were investigated using the slag-metal equilibria. Also, the effect of CaF₂ on the sulfide capacity and the activity coefficient of Fe _t O were of particular interest in controlling the sulfur level and cleanliness of low-pressure rotor steels.     

Using classification techniques for informal requirements in the requirements analysis-supporting system

In order to efficiently develop large-scale and complicated software, it is important for system engineers to correctly understand users’ requirements. Most requirements in large-scale projects are collected from various stakeholders located in various regions, and they are generally written in natural language. Therefore, the initial collected requirements must be classified into various topics prior to analysis phases in order to be usable as input in several requirements analysis methods. If this classification process is manually done by analysts, it becomes a time-consuming task. To solve this problem, we propose a new bootstrapping method which can automatically classify requirements sentences into each topic category using only topic words as the representative of the analysts’ views. The proposed method is verified through experiments using two requirements data sets: one written in English and the other in Korean. The significant performances were achieved in the experiments: the 84.28 and 87.91 F1 scores for the English and Korean data sets, respectively. As a result, the proposed method can provide an effective function for an Internet-based requirements analysis-supporting system so as to efficiently gather and analyze requirements from various and distributed stakeholders by using the Internet.     

Probing stress effects in HfO2 gate stacks with time dependent measurements

Effects of constant voltage stress (CVS) on gate stacks consisting of an ALD HfO₂ dielectric with various interfacial layers were studied with time dependent sensing measurements: DC I–V, pulse I–V, and charge pumping (CP) at different frequencies. The process of injected electron trapping/de-trapping on pre-existing defects in the bulk of the high-κ film was found to constitute the major contribution to the time dependence of the threshold voltage (V_t) shift during stress. The trap generation observed with the low frequency CP measurements is suggested to occur within the interfacial oxide layer or the interfacial layer/high-κ interface, with only a minor effect on V_t.     

Mutational analysis of the three cysteines and active-site aspartic acid 103 of ketosteroid isomerase from Pseudomonas putida biotype B

In order to clarify the roles of three cysteines in ketosteroid isomerase (KSI) from Pseudomonas putida biotype B, each of the cysteine residues has been changed to a serine residue (C69S, C81S, and C97S) by site-directed mutagenesis. All cysteine mutations caused only a slight decrease in the k(cat) value, with no significant change of Km for the substrate. Even modification of the sulfhydryl group with 5,5'-dithiobis(2-nitrobenzoic acid) has almost no effect on enzyme activity. These results demonstrate that none of the cysteines in the KSI from P. putida is critical for catalytic activity, contrary to the previous identification of a cysteine in an active-site-directed photoinactivation study of KSI. Based on the three-dimensional structures of KSIs with and without dienolate intermediate analog equilenin, as determined by X-ray crystallography at high resolution, Asp-103 was found to be located within the range of the hydrogen bond to the equilenin. To assess the role of Asp-103 in catalysis, Asp-103 has been replaced with either asparagine (D103N) or alanine (D103A) by site-directed mutagenesis. For D103A mutant KSI there was a significant decrease in the k(cat) value: the k(cat) of the mutant was 85-fold lower than that of the wild-type enzyme; however, for the D103N mutant, which retained some hydrogen bonding capability, there was a minor decrease in the k(cat) value. These findings support the idea that aspartic acid 103 in the active site is an essential catalytic residue involved in catalysis by hydrogen bonding to the dienolate intermediate.     

Causal modeling to estimate sensitivity and specificity of a test when prevalence changes

The suppressive effect of the halogenated inhalation anesthesia on cortical somatosensory evoked potentials (cSSEPs) has been well documented. Less studied and appreciated is the effect of nitrous oxide often with a narcotic as an alternative to a potent agent for spinal cord monitoring. This study sought to define more clearly the influence of nitrous oxide on cSSEPs elicited to posterior tibial nerve stimulation. A secondary purpose was to demonstrate the advantage of a total intravenous propofol anesthesia in facilitating uncompromised large-amplitude cSSEPs. Fifty adult patients undergoing anterior cervical discectomy served as the study sample. Brainstem and cortical posterior tibial nerve SSEPs were recorded under two independent anesthesia conditions, namely, nitrous oxide and propofol. Results demonstrated a significant amplitude reduction and latency prolongation with the nitrous oxide versus propofol protocol. cSSEP amplitude with propofol was, on the average, approximately two times larger than that with nitrous oxide. Based on these findings, the use of nitrous-oxide anesthesia is not recommended when limited to monitoring cSSEPs that are already amplitude compromised secondary to existing spinal cord disease.     

Particle-bombardment-mediated DNA vaccination with rotavirus VP4 or VP7 induces high levels of serum rotavirus IgG but fails to protect mice against challenge

We recently reported that epidermal immunization using the PowderJet particle delivery device with plasmid vector pcDNA1/EDIM6 encoding rotavirus VP6 of murine strain EDIM induced high levels of serum rotavirus IgG but failed to protect mice against EDIM infection (Choi, A. H., Knowlton, D. R., McNeal, M. M., and Ward, R. L. (1997) Virology 232, 129-138.). This was extended to determine whether pcDNA1/EDIM4 or pcDNA1/EDIM7, which encode either rotavirus VP4 or VP7, the rotavirus neutralization proteins, could also induce rotavirus-specific antibody responses and if these responses resulted in protection. Titers of rotavirus serum IgG increased with the first dose in mice immunized with pcDNA1/EDIM7, but little or no serum rotavirus IgG was detected in mice immunized with pcDNA1/EDIM4. In vitro assays with these plasmids in rabbit reticulocyte lysates showed that VP4 was expressed but the amount was considerably lower than VP6 or VP7. To improve expression of VP4 and induction of rotavirus-specific humoral responses, the coding region of VP4 was cloned into the high-expression plasmid WRG7054 as a fusion protein containing the 22-amino-acid secretory signal peptide of tissue plasminogen activator (tPA) at its N terminus. In vitro expression of tPA::VP4 was significantly higher than unmodified VP4, and mice inoculated with WRG7054/EDIM4 generated high titers of rotavirus IgG. The coding sequence of VP7 without the first 162 nucleotides was also cloned into WRG7054, but no difference was observed between titers of serum rotavirus IgG in mice immunized with this plasmid (WRG7054/EDIM7Delta1-162) and pcDNA1/EDIM7. The rotavirus-specific IgG titers in all immune sera were predominantly IgG1 indicating induction of Th 2-type responses. None of the mice immunized with any of the VP4 or VP7 plasmids developed serum or fecal rotavirus IgA or neutralizing antibody to EDIM. When immunized mice were challenged with EDIM virus, there was no significant reduction in viral shedding relative to unimmunized controls. Therefore epidermal immunization with VP4 or VP7 alone elicited rotavirus IgG responses but did not protect against homologous rotavirus challenge.     

Strength of Al-Zn-Mg-Cu matrix composite reinforced with SiC particles

The AA7075 alloys reinforced with SiC and without SiC particles were fabricated by a pressureless infiltration method, and then, their tensile properties and microstructures were analyzed. The spontaneous infiltration of molten metal at 800 °C for 1 hour under a nitrogen atmosphere made it possible to fabricate 7075 Al matrix composite reinforced with SiC, as well as a control 7075 Al without SiC. A significant strengthening even in the control alloy occurred due to the formation of in-situ AlN particle even without an addition of SiC particles. Composite reinforced with SiC particles exhibited higher strength values than the control alloy in all aging conditions (underaged (UA), peak-aged (PA), and overaged (OA)), as well as a solution treated condition. Spontaneous infiltration was further prompted owing to the combined effect of both Mg and Zn. This may lead to an enhancement of wetting between the molten alloy and the reinforcement. Consequently, strength improvement in a composite may be attributed to good bond strength via enhancement of wetting. The grain size of the control alloy is greatly decreased to about 2.5 μm compared to 10 μm for the commercial alloy. In addition, the grain size in the composite is further decreased to about 2 μm. These grain refinements contributed to strengthening of the control alloy and the composite.     

Solar/UV-induced photocatalytic degradation of three commercial textile dyes.

The photocatalytic degradation of three commercial textile dyes with different structure has been investigated using TiO(2) (Degussa P25) photocatalyst in aqueous solution under solar irradiation. Experiments were conducted to optimise various parameters viz. amount of catalyst, concentration of dye, pH and solar light intensity. Degradation of all the dyes were examined by using chemical oxygen demand (COD) method. The degradation efficiency of the three dyes is as follows: Reactive Yellow 17(RY17) > Reactive Red 2(RR2) > Reactive Blue 4 (RB4), respectively. The experimental results indicate that TiO(2) (Degussa P25) is the best catalyst in comparison with other commercial photocatalysts such as, TiO(2) (Merck), ZnO, ZrO(2), WO(3) and CdS. Though the UV irradiation can efficiently degrade the dyes, naturally abundant solar irradiation is also very effective in the mineralisation of dyes. The comparison between thin-film coating and aqueous slurry method reveals that slurry method is more efficient than coating but the problems of leaching and the requirement of separation can be avoided by using coating technique. These observations indicate that all the three dyes could be degraded completely at different time intervals. Hence, it may be a viable technique for the safe disposal of textile wastewater into the water streams.