聚烯烃接枝马来酸酐接枝率的测定—聚乙烯接枝

以非均相化学接枝法和红外光谱法相结合的方法绘制了定量校正曲线,可用于红外光谱法测定聚乙烯接枝马来酸酐的接枝率。该方法简便快速,准确可靠,重复性好。     

Sex pheromone biology and behavior of the cowpea weevilCallosobruchus maculatus (Coleoptera: Bruchidae)

Female cowpea weevils,Callosobruchus maculatus (F.), emitted a pheromone which excited males. Pheromone release began soon after emergence and continued for one week. Synchronization of pheromone release with calling behavior was demonstrated. Mating reduced pheromone release but not male response. Pheromone obtained by aeration collection was utilized for determining a quantitative dose-response relationship.Mention of a commercial product does not constitute an endorsement by the USDA.Visiting scholar on leave from Shanghai Institute of Entomology, PRC.     

高精度电阻应变式无线压力变送器应用设计

设计了一种高精度压力变送器,基于电阻式应变片构建的惠斯通电桥测量电路,采用程控放大电路进行量程自动可调的倍数差分放大,加之数字滤波技术,运用单片机自带的AD转换电路进行模数转换,通过蓝牙模块与由C++Builder 6.0编写的上位机软件进行通信,实现远距离实时监测。实验证明,该压力变送器具有安全性高、稳定性强、准确性高等优点,在工程应用中表现良好。     

基于轨迹频率抑制的轨迹隐私保护方法

移动终端和定位技术的快速发展带来了轨迹大数据.研究者通过挖掘和分析发布的轨迹数据集,可获得一些有价值的信息.攻击者也可利用所掌握的知识对发布的轨迹数据集进行推理分析,以较高的概率推断出用户的隐私信息.轨迹抑制是一类实现隐私保护的重要方法,然而轨迹抑制的点数越多会造成数据效用越低.因此,在满足用户隐私需求的情况下,如何选择合理的抑制点来提高匿名处理后的数据效用是数据发布中要解决的重要问题.针对以上问题,文中提出两种基于轨迹频率的方案对轨迹数据进行匿名处理.第一种方案是根据情况抑制整条有问题的轨迹数据或向有问题的轨迹数据集中添加假数据;第二种方案是采用特定的轨迹局部抑制法对数据进行抑制处理.实验表明相对于已有方案,在满足同等隐私需求的情况下,文中方案处理后的数据效用提升了近30%.     

基于CY7C68013A的USB2.0高速接口设计

为了充分利用USB2.0的带宽,解决数据传输时存在的速度瓶颈问题,提出了一种基于CY7C68013A的USB2.0高速接口设计方法。采用CY7C68013A的SLAVE FIFO工作模式,芯片内部CPU不参与数据传输,FPGA设计的外部控制电路直接读写芯片内部FIFO,有效避免了内部CPU参与数据传输时带来的时间开销,从而提高了传输速度。     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

输血后丙型肝炎病毒NS4区抗体的动态变化及其诊断意义

利用重组NS4抗原及合成肽5－11抗原分别检测5例输血后丙型肝炎患者的系列血清136份，并与HCV总抗体及HCVRNA检测结果比较，发现抗NS4抗体的动态变化虽然有两种模式，但在多数情况下为一种模式，即抗体阳转后很少转阴，并且其动态变化基本与总抗体相似。同时发现2例病人抗NS4抗体阳转时间早于总抗体，因此，推测HCV检测试剂中增加NS4抗原可能对提高HCV诊断试剂的灵敏度有一定意义。     

Accelerating 2D orthogonal matching pursuit algorithm on GPU

Two-dimensional orthogonal matching pursuit (2D-OMP) algorithm is an extension of the one-dimensional OMP (1D-OMP), whose complexity and memory usage are lower than the 1D-OMP when they are applied to 2D sparse signal recovery. However, the major shortcoming of the 2D-OMP still resides in long computing time. To overcome this disadvantage, we develop a novel parallel design strategy of the 2D-OMP algorithm on a graphics processing unit (GPU) in this paper. We first analyze the complexity of the 2D-OMP and point out that the bottlenecks lie in matrix inverse and projection. After adopting the strategy of matrix inverse update whose performance is superior to traditional methods to reduce the complexity of original matrix inverse, projection becomes the most time-consuming module. Hence, a parallel matrix–matrix multiplication leveraging tiling algorithm strategy is launched to accelerate projection computation on GPU. Moreover, a fast matrix–vector multiplication, a parallel reduction algorithm, and some other parallel skills are also exploited to boost the performance of the 2D-OMP further on GPU. In the case of the sensing matrix of size 128 \(\times \) 256 (176 \(\times \) 256, resp.) for a 256 \(\times \) 256 scale image, experimental results show that the parallel 2D-OMP achieves 17 \(\times \) to 41 \(\times \) (24 \(\times \) to 62 \(\times \) , resp.) speedup over the original C code compiled with the O \(_2\) optimization option. Higher speedup would be further obtained with larger-size image recovery.     

Experimental Study of an EMG-Controlled 5-DOF Anthropomorphic Prosthetic Hand for Motion Restoration

In this paper, we attempted to evaluate the performance of an electromyography (EMG)-controlled 5-DOF prosthetic hand on ten transradial amputees. The proposed prosthesis is composed of a five-fingered hand, a passive wrist, and a customized socket for each subject. The EMG control methods included both a commonly used pattern recognition-based scheme (DD-SVM) and a novel digital encoding strategy (double-channel template matching (DCTM)). A virtual 3D hand platform was developed for training the subjects and rapidly testing the control methods. For each subject, the performance of the EMG control methods was firstly measured by off-line classification accuracy; then, according to the accuracy, a particular control method was selected and embedded in the EMG controller for further validation on ordinary daily life activities. Our experiments were conducted to test not only the hand’s grasp ability but also other multifinger cooperation skills. The result indicated that the subjects of rich control experience can accomplish several intuitive motion control over their hands. However, the kinds of the motions and their relative recognition accuracy may depend on some individual differences, such as the amputation level, the activity of the residual nerve-muscle system, and the richness of control experience. Meanwhile, the proposed digital encoding method, DCTM, which only utilized two channels of EMG, was necessary for those amputees with few available control signals. This paper suggested that the EMG control method should be differently considered according to the particular condition of each subject.     

混合材对水泥与减水剂适应性的影响研究

通过对掺高效减水剂水泥净浆流动性及流动性损失的测定试验，研究了3种混合材(粉煤灰、水淬高炉矿渣和沸石)在不同替代率情况下对减水剂作用效果的影响。结果表明：水淬高炉矿渣有利于改善减水剂与水泥的适应性，而掺粉煤灰和沸石(尤其是沸石)则会导致减水剂塑化作用的降低，而且浆体流动性损失也有增大趋势。