青海湖的地质构造背景及形成演化

青海湖地区位于 3个构造单元及多条深断裂的交汇部位 ,结构复杂 ,强度较弱。上新世出现断陷 ,中更新世成湖。湖盆可划分为 3个地垒和 3个次级断陷盆地。其形成和演化受中祁连南缘大断裂带、宗务隆山 -青海南山大断裂带和黑马河 -达日大断裂带重新活动及其它NWW ,NW ,NNW ,SN ,NE向断裂的活动及伴随的差异隆升所控制 ,与青藏高原的隆升演化有密切关系 ,尤其是可能与青藏高原发生后造山伸展作用有关的应力场转变造成的负反转构造有重要关系。中中新世夷平面形成以来的新构造活动和青海湖的形成演化具明显的脉动性。中中新世以来的新构造活动可分为 5个阶段 ,青海湖形成演化过程可大致分为 9期     

成都断陷区活动断裂带基本特征及其潜在地震能力的判定

成都断陷是龙门山前缘重要的第四纪构造盆地，龙门山前山断裂和龙泉山西坡断裂对断陷盆地的形成和演化有重要的控制作用。晚第四纪时成都断陷遭受北西－南东向的挤压，使断陷盆地边缘和内部的北东，北北东向断裂具逆冲运动性质，并导致龙门山前山断裂，龙泉山西坡断裂和蒲江－新津－成都－德阳断裂上中，强地震的发生，研究表明，上述３条断裂均具有发生中强地震的潜在能力。     

牛首山-罗山断裂带的变形特征及其构造意义

牛首山-罗山断裂带是青藏高原东北缘最外侧的一条断裂带,其空间分布、深部结构、运动学特征以及变形机制对研究青藏高原东北角弧形断裂系的形成与演化具有重要意义。文中通过对横穿牛首山-罗山的4条地震反射剖面的解释及断裂带部分地区大比例尺的构造地质填图,发现牛首山-罗山断裂带具有不连续性与分段性。断裂带南段罗山断裂以正花状构造为特征,显示断裂具有右旋走滑性质;中段牛首山东麓断裂可能并不存在,该区以强烈的褶皱变形为特征;北段三关口断裂则以左旋走滑为特征。牛首山-罗山断裂带的这种不连续性和分段性反映了断裂带的不同构造部位在青藏高原向NE方向扩展过程中具有不同的变形样式。     

成都平原的形成与演化

成都平原是位于青藏高原东南侧前缘的第四纪压陷盆地，东西两侧分别被龙泉山和龙门山所限。研究表明，成都平原的第四纪断陷作用从大邑－彭县－绵竹隐伏断裂和浦江－新津－成都－德阳断裂所夹的北东向断块的为民陷开始，然后向东西两侧扩展。不同断裂在不同时代的逆冲运动对成都平原的形成和演化起重要的制约作用。     

张家口-蓬莱断裂带地震构造特征的初步探讨

北西向张家口－蓬莱断裂带由近２０条北西至北西西向断裂组成,是一条对新生代区域地质构造发育起到重要控制作用的地壳构造带。断裂带新生代活动由中部向西北和东南部发展,总体表现左旋走滑性质。断裂带有山西断陷盆地带等几条北东向活动构造带与之交汇,形成北西和北东向两组断裂相互交切的构造组合,出现５个复杂的构造交接段。６级以上强震和大多数中小地震群集于这些地段,其中北西和北东向断裂都可能发生地震,显示共轭破裂错动特征,但北东向断裂发生的地震强度较大。张北－尚义６．２级地震发生于断裂带与山西断陷盆地带交接段的西缘,是断裂带向西北扩展的结果     

龙门山中段后山断裂带晚第四纪运动特征

本文通过对龙门山断裂带中段后山断裂带主要断裂的研究,认识到从茂汶断裂往西北到挂思岭断裂,断裂最新活动时代有逐渐变老的趋势,反映了龙门山后山断裂在晚新生代同样具有前展式(背驮式)逆冲推覆特征,主断裂茂汶断裂的最新活动时代为晚更新世晚期;后山断裂带除逆冲挤压构造变形外,还存在拉张变形,这为研究青藏高原的运动学及动力学等问题提供了重要信息.     

东昆仑断裂带东段(玛沁—玛曲)晚第四纪长期滑动习性研究

东昆仑断裂带、阿尔金断裂带、祁连山一海原活动断裂带等组成了青藏高原北部大型走滑断裂系。这些断裂之间的空间联系、巨大的走滑量及其地壳缩短特征,都显示了它们在印度板块和欧亚板块汇聚过程中青藏高原的形成扮演了主要角色。这些断裂准确的滑动速率对于研究青藏高原变形和演化过程,确定水平滑动、变形的规模,建立高原的变形和演化模式提供了重要依据。     

青藏高原东缘龙门山断裂带南西段地震危险性分析

2008年5月12日汶川8.0级大地震发生在位于青藏高原东缘、南北地震带中段的龙门山断裂带中北段,该地震破裂自初始破裂点开始,沿龙门山断裂带中央及前山断裂呈NE向单侧扩展;龙门山断裂带南西段在本次地震中并未参与活动.     

离石断裂带的构造及其地震危险性

在山西断陷带西侧吕梁隆起的西坡上,有人认为有一条纵贯全区的离石断裂带,并把其作为鄂尔多斯断块和太行山断块的分界断裂,本文通过近期的工作结果及对深部构造、岩浆活动和钻孔资料的分析,认为把离石断裂带作为构造单元的分界断裂的依据不足。     

青藏高原北部的第四纪断层运动

近１０年来，通过详细考察和填图工作，对青藏高原北部的第四纪活动构造及断层运动取得了大批新资料，在最近在中法合作研究中，对东昆仑活动断裂带及邻区又进行了较深入的调查，本文以上述新资料为基础，简要讨论了青藏高原北部第四纪活断层的运动学和动力学基本特征本区重要的活动断裂可划分为下述３类，（１）大规模的弧形左旋走滑断裂带，其中包括青藏高原北部边缘的阿尔金活动断裂带，昌马活动断裂带及海原活动断裂带，中部的东     

再探中国大陆第四纪地壳运动时程

以柴达木盆地新构造运动发生的期次、黄河兰州谷地出现的突出构造事件、阿尔金断裂带第四纪所经历的大运动阶段、攀西裂谷区新构造运动分期、北京地区南段新构造运动波动、全国一些地区断裂活动时序等为例证,再次证明了第四纪以来中国大陆地壳活动具有明显的时段性,４次强烈的构造活动分别发生在上新世末至早更新世初、早更新世中晚期、中更新世中晚期和全新世。其中,以中更新世中晚期地壳活动强度最大、波及范围最广     

豫北深、浅部构造特征与地震

通过对豫北地区浅层和深部地震地质构造特征及地震活动性的综合分析,以薄壁－新乡－商丘断裂带为划分为北部地区和南部地区,并分别进行了论述。认为北部地区构造线主体为北东向,与华北断块区的构造线一致,浅层构造沿区域构造线呈断隆和断陷相间展布,深部莫霍界面隆起凹陷也相间排列,南部地区的主体构造线基本为北西向,与北部地区截然不同,浅层构造豫东为在整体沉降的基础上有次级的隆起和凹陷,深部结构表现为大面积的莫霍面     

ANALYSIS OF EVOLUTION OF THE RIYUESHAN FAULT SINCE LATE PLEISTOCENE USING STRUCTURAL GEOMORPHOLOGY

The northeastern margin of Tibetan plateau is an active block controlled by the eastern Kunlun fault zone, the Qilian Shan-Haiyuan fault zone, and the Altyn Tagh fault zone. It is the frontier and the sensitive area of neotectonic activity since the Cenozoic. There are widespread folds, thrust faults and stike-slip faults in the northeastern Tibetan plateau produced by the intensive tectonic deformation, indicating that this area is suffering the crustal shortening, left-lateral shear and vertical uplift. The Riyueshan Fault is one of the major faults in the dextral strike-slip faults systems, which lies between the two major large-scale left-lateral strike-slip faults, the Qilian-Haiyuan Fault and the eastern Kunlun Fault. In the process of growing and expanding of the entire Tibetan plateau, the dextral strike-slip faults play an important role in regulating the deformation and transformation between the secondary blocks. In the early Quaternary, because of the northeastward expansion of the northeastern Tibetan plateau, tectonic deformations such as NE-direction extrusion shortening, clockwise rotation, and SEE-direction extrusion occurred in the northeastern margin of the Tibetan plateau, which lead to the left-lateral slip movement of the NWW-trending major regional boundary faults. As the result, the NNW-trending faults which lie between these NWW direction faults are developed. The main geomorphic units developed within the research area are controlled by the Riyueshan Fault, formed due to the northeastward motion of the Tibet block. These geomorphic units could be classified as:Qinghai Lake Basin, Haiyan Basin, Datonghe Basin, Dezhou Basin, and the mountains developed between the basins such as the Datongshan and the Riyueshan. Paleo basins, alluvial fans, multiple levels of terraces are developed at mountain fronts. The climate variation caused the formation of the geomorphic units during the expansion period of the lakes within the northeastern Tibetan plateau. There are two levels of alluvial fans and three levels of fluvial terrace developed in the study area, the sediments of the alluvial fans and fluvial terraces formed by different sources are developed in the same period. The Riyueshan Fault connects with the NNW-trending left-lateral strike-slip north marginal Tuoleshan fault in the north, and obliquely connects with the Lajishan thrust fault in the south. The fault extends for about 180km from north to south, passing through Datonghe, Reshui coal mine, Chaka River, Tuole, Ketu and Xicha, and connecting with the Lajishan thrusts near the Kesuer Basin. The Riyueshan Fault consists of five discontinuous right-step en-echelon sub-fault segments, with a spacing of 2~3km, and pull-apart basins are formed in the stepovers. The Riyueshan Fault is a secondary fault located in the Qaidam-Qilian active block which is controlled by the major boundary faults, such as the East Kunlun Fault and the Qilian-Haiyuan Fault. Its activity characteristics provide information of the outward expansion of the northeastern margin of Tibet. Tectonic landforms are developed along the Riyueshan Fault. Focusing on the distinct geomorphic deformation since late Pleistocene, the paper obtains the vertical displacement along the fault strike by RTK measurement method. Based on the fault growth-linkage theory, the evolution of the Riyueshan Fault and the related kinetic background are discussed. The following three conclusions are obtained:1)According to the characteristics of development of the three-stage 200km-long steep fault scarp developed in the landforms of the late Pleistocene alluvial fans and terraces, the Riyueshan Fault is divided into five segments, with the most important segment located in the third stepover(CD-3); 2)The three-stage displacement distribution pattern of the Riyueshan Fault reveals that the fault was formed by the growths and connections of multiple secondary faults and is in the second stage of fault growth and connection. With CD-3 as the boundary, the faults on the NW side continue to grow and connect; the fault activity time on the SE side is shorter, and the activity intensity is weaker; 3)The extreme value of the fault displacement distribution curve indicates the location of strain concentration and stress accumulation. With the stepover CD-3 as the boundary, the stress and strain on NW side are mainly concentrated in the middle and fault stepovers. The long-term accumulation range of stress on the SE side is relatively dispersed. The stress state may be related to the counterclockwise rotation inside the block under the compression of regional tectonic stress.     

Northwest trending tectonic belt in the middle Yanshan Orogenic Belt of northeast Hebei Province,North China: Tectonic evolution and geochronology

1 An out-of-line northwest trending tectonic beltin the middle part of the Yanshan Orogenic Belt The tectonic framework of the intraplate YanshanOrogenic Belt is dominated by east-west and northeastextending structures as revealed by many geologists.There lies, however, a 100-km-long enigmatic out-of-line northwest extending tectonic complex in the mid-dle part of the Yanshan Orogenic Belt (fig. 1). Theresearch on the geometry, kinematics, timing of thiscomplex tectonic belt and its r…     

安徽地区历史及现代地震活动与断裂活动性关系研究

安徽地区处于华北板块与扬子板块沿着大别造山带的陆一陆碰撞变形带,构造背景复杂多样,断裂十分发育。郯庐断裂带长期控制着两侧的构造格局,大别山东缘的霍山地区多条断裂在晚第四纪有新活动。史料记载表明安徽地区历史地震以中强震为主,最高震级为M6 1/4级。根据区域地震地质、历史地震近年最新研究成果,对第四纪特别是晚第四纪以来的断裂活动习性做出归纳和分类,并分析历史地震、1970年后有仪器记载以来中等强度地震和小地震密集与断裂活动的相关性,为中长期地震预测提供依据。     

华北地区跨断层垂直形变分区特征及其对块体划分的意义

对 70年代以来的华北地区跨断层形变测量资料进行了分区研究。按构造单元将华北地区的跨断层测量台站或测点分为五组 :山西带、郯庐带、阴山 -燕山带西段、阴山 -燕山带东段和首都圈。对 80项实测资料的计算结果表明 ,华北地区断层垂直活动平均年速率为 0 335mm/a ,但各分区之间的断层活动速率值相差很大。山西断陷带的断层形变速率最高 ,是华北地区最重要的活动块体边界 ;其它构造带的断层形变速率都比较低     

南海构造格局及其演化

依据重磁资料在南海及其邻区识别出17条深大断裂和10个重磁异常区.据此并结合其他地质资料,在南海及其邻区划分出7个地质结构不同的构造单元.早白垩世南海地区曾形成过统一的基底,新生代时统一的南海基底发生肢解,这一个肢解过程经历了两个在时空上接踵发生、交叠作用的构造事件.第一个构造事件为巽他地块与华夏古陆之间古南海的萎缩、闭合和地块碰撞;第二个构造事件为南沙地块裂离华夏古陆并向巽他地块增生,且伴随新南海的持续扩张,直至中中新世.区域构造演化控制了南海沉积盆地呈"北三南三、东西两竖"格局分布,进而控制了油气富集区的分布.     

青藏高原东北隅似三联点构造特征

在大陆内部,对于一定尺度的构造块体,似三联点构造是一种普通的构造形式。由于大陆内部块体旋转的普遍性,似三联点构造可形成顺旋型和逆旋型两种构造型式。     

额尔古纳地块东缘和兴安地块西缘电性结构研究

中国东北地区位于中亚造山带东段,夹持在西伯利亚板块、华北板块和太平洋板块之间,是解决东亚大陆构造演化的关键区域,其中额尔古纳地块和兴安地块位于东北地区西部,是两个十分重要的地质构造单元.横过额尔古纳地块东缘和兴安地块西缘的大地电磁测深剖面揭示了两块体结合带附近的深部电性结构,进而为该区构造演化提供新的电性依据.本文通过对剖面测点数据做标准化处理,并对二维偏离度、构造走向等进行计算与分析,采用非线性共轭梯度(NLCG)算法对TE+TM模式的数据做了二维反演,获得了该剖面的地壳和上地幔电性结构模型,划分出三个典型构造单元:额尔古纳地块东缘、碰撞拼合带和兴安地块西缘.研究结果表明,研究区上地壳基本呈高阻特征,可能为岩浆岩,代表其经历了多期次岩浆作用,而额尔古纳地块东缘和兴安地块西缘中下地壳的高导体反映其地壳非刚性的特点,可能形成于后期伸展环境;拼合带中下地壳存在大范围高导体并与上地幔高导体相连,指示出地幔物质上升的通道,反映出地幔物质的上升作用可能是后期构造伸展的重要动力.