The synthesis of Fe-containing ionic liquid and its catalytic performance for the dehydration of fructose

Four Fe-containing ionic liquids (ILs) were synthesized by coupling of conventional imidazole ionic liquids [C_xmim]Cl (x = 4, 8, 12, 16) with FeCl₃ and were characterized by FT-IR, Raman, ESI–MS and TG. All of the Fe-containing ILs were applied to the conversion of fructose into 5-hydroxymethylfurfural (HMF) in 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) subsequently and the result showed that [C₁₆mim]FeCl₄ exhibited excellent catalytic performance. Then the different reaction parameters with [C₁₆mim]FeCl₄ as catalyst were studied in detail. A 92.8% yield of HMF was obtained with 0.03 g [C₁₆mim]FeCl₄ and 0.1 g fructose in 1.0050 g [Bmim]Cl at 80 °C for 40 min in fructose/[Bmim]Cl solution.     

离子液体中酮肟O-烷基化反应的研究

以[Bmim]PF6,[Bmim]BF4,[Bmim]OH为介质,以NaOH为缚酸剂,由酮肟与卤烷、硫酸酯等烷基化剂在20～40℃反应1～2h,以52%～94%的收率制备了酮肟醚衍生物,产物结构经1HNMR,GC-MS表征.结果表明,该方法简便易操作,所用离子液体对环境友好,并可循环使用.     

Glycolysis of poly(ethylene terephthalate) (PET) using basic ionic liquids as catalysts

The glycolysis of poly(ethylene terephthalate) (PET) was studied using several ionic liquids and basic ionic liquids as catalysts. The basic ionic liquid, 1-butyl-3-methylimidazolium hydroxyl ([Bmim]OH), exhibits higher catalytic activity for the glycolysis of PET, compared with 1-butyl-3-methylimidazolium bicarbonate ([Bmim]HCO₃), 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) and 1-butyl-3-methylimidazolium bromide ([Bmim]Br). FT-IR, ¹H NMR and DSC were used to confirm the main product of glycolysis was bis(2-hydroxyethyl) terephthalate (BHET) monomer. The influences of experimental parameters, such as the amount of catalyst, glycolysis time, reaction temperature, and dosages of ethylene glycol on the conversion of PET, yield of BHET were investigated. The results showed a strong influence of the mixture evolution of temperature and reaction time on depolymerization of PET. Under the optimum conditions of m(PET):m(EG): 1:10, dosage of [Bmim]OH at 0.1 g (5 wt%), reaction temperature 190 °C and time 2 h, the conversion of PET and the yield of BHET were 100% and 71.2% respectively. Balance between the polymerization of BHET and depolymerization of PET could be changed when the reaction time was more than 2 h and contents of catalyst and EG were changed.     

褐煤在离子液体1-丁基-3-甲基咪唑氯盐中热溶及热溶产物的分离与分析

基于离子液体对煤的高效解聚性能,对先锋褐煤(XL)、锡林郭勒褐煤(XLGL)和胜利褐煤(SL)在离子液体1-丁基-3-甲基咪唑氯盐([Bmim]Cl)中的热溶性能进行了研究.同时,对XL在离子液体[Bmim]Cl中的热溶产物进行了分离,并对分离所得各组分进行了分析表征来研究褐煤的结构信息.研究发现,在相同条件下离子液体[Bmim]Cl对不同褐煤的萃取性能显著不同,其顺序为XL>SL>XLGL.先锋褐煤离子液体热溶物可分离为丙酮可溶物、吡啶可溶物和吡啶不溶物,其中,丙酮可溶物(AS)为15.9%、吡啶可溶物(PS)为56.0%、吡啶不溶物(PI) 为28.1%.分析表明,丙酮可溶物中含有长链的脂肪化合物及部分三环、四环等芳香化合物,吡啶可溶物和吡啶不溶物中大多以三环及五环芳香化合物的形式存在.     

Extraction and mechanism investigation of trace roxithromycin in real water samples by use of ionic liquid-salt aqueous two-phase system

The ionic liquid, as a green solvent, has several advantages over the organic solvents in traditional liquid-liquid extraction. Aqueous two-phase system (ATPS) consisting of a hydrophilic ionic liquid (1-butyl-3-methylimidazolium tetrafluoraborate, [Bmim]BF₄) and Na₂CO₃, which is a novel, simple, non-toxic and effective sample pretreatment technique coupled with molecular fluorescence spectrophotometry, was developed for the simultaneous separation, enrichment and rapid analysis of roxithromycin. The extraction yield of roxithromycin in [Bmim]BF₄-Na₂CO₃ aqueous two-phase system is influenced by the types of salts, concentrations of Na₂CO₃ and [Bmim]BF₄, as well as the extracting temperature. Under the optimum conditions, the average extraction efficiency is up to 90.7%. The mechanism of ionic liquid-salt ATPS formation was discussed by hydration theory, and the extraction mechanism of the [Bmim]BF₄-salt ATPS was investigated by FT-IR spectroscopy and UV-vis spectroscopy. The results demonstrate that no chemical (bonding) interactions are observed between ionic liquid and roxithromycin, while the nature properties of the roxithromycin are not altered. This method was practical when applied to the analysis of roxithromycin in real water samples with the detection limit of 0.03 μg mL⁻¹, relative standard deviation (RSD) of 1.9% (n = 13), and linear ranges of 1.00-20.00 μg mL⁻¹. The proposed extraction technique will be promising in the separation of other small biomolecules.     

Preparation of fructone catalyzed by water-soluble Brφnsted acid ionic liquids

Fructone(2-methyl-2-ethylacetoacetate-1,3-dioxolane),a flavouring material,has been synthesized from ethyl acetoacetate and glycol using five water-soluble Br(?)nsted acid ionic liquids as catalysts for the first time.The used Br(?)nsted acid ionic liquids include [Hmim]Tfa,[Hmim]Tsa,[Hmim]BF_4,[Bmim]HSO4,[Bmim]H_2PO_4,and[Hmim]BF_4 showed the highest catalytic activity for the preparation of fructone.After reaction,the product could be isolated from the reaction system automatically,and the ionic liquid could be directly reused without dehydration.     

咪唑类离子液体用作电解质对燃料电池性能的影响

为优化改善燃料电池的整体性能,在自由电解质燃料电池中,考察了五种咪唑类离子液体用作燃料电池电解质时对燃料电池性能的影响。结果表明,以氢气为燃料时,在相同电流密度下,电路电压和输出功率从高到低依次为1-丁基-3-甲基咪唑四氟硼酸盐 > 1-丁基-3-甲基咪唑六氟磷酸盐 > 氢氧化钠溶液 >> 氯化-1-丁基-3-甲基咪唑 > 溴化-1-丁基-3-甲基咪唑 > 1-丁基-3-甲基咪唑硫酸氢盐;以甲烷为燃料时,相同电流密度下,电路电压和输出功率从高到低则依次为溴化-1-丁基-3-甲基咪唑 > 1-丁基-3-甲基咪唑硫酸氢盐 > 氯化-1-丁基-3-甲基咪唑 > 氢氧化钠溶液> 1-丁基-3-甲基咪唑四氟硼酸盐 > 1-丁基-3-甲基咪唑六氟磷酸盐。以[Bmim]BF₄为氢气燃料电池电解质时,温度升高和离子液体中水含量增加,均会使燃料电池的性能减弱。     

Solvent-free aza-Markovnikov and aza-Michael additions promoted by a catalytic amount of imidazolide basic ionic liquids

A family of imidazolide ionic liquids were synthesized and characterized. These ionic liquids combined the virtues of strong basicity and relatively good thermal stability. Catalytic properties of these imidazolide ionic liquids were investigated and satisfactory yield was achieved when 2.0 mol % of [Bmim]Im was used as catalyst for aza-Markovnikov addition under solvent-free condition at room temperature in one hour. Experimental results show that a hydrogen bond is not formed between [Bmim]Im/imidazole and vinyl ester, and its existence is not necessary for the [Bmim]Im catalyzed aza-Markovnikov addition either. A possible mechanism for [Bmim]Im-catalyzed aza-Markovnikov addition was proposed. The use of imidazolide ionic liquids in aza-Michael addition was investigated as well.     

An unexpected reaction between 5-hydroxymethylfurfural and imidazolium-based ionic liquids at high temperatures

A new compound was detected during the production of 5-hydroxymethylfurfural (HMF) from glucose and cellulose in the ionic liquid 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) at high temperatures. Further experiments found that it was derived from the reaction of HMF with [Bmim]Cl. The structure of new compound was established as 1-butyl-2-(5'-methyl-2'-furoyl)imidazole (BMI) based on nuclear magnetic resonance and mass spectrometry analysis, and a possible mechanism for its formation was proposed. Reactions of HMF with other imidazolium-based ionic liquids were performed to check the formation of BMI. Our results provided new insights in terms of side reactions between HMF and imidazolium-based ionic liquids, which should be valuable for designing better processes for the production of furans using biomass and related materials.     

[Bmim]Cl/FeCl3离子液体催化α-生育酚与β-D-五乙酰葡萄糖的糖基化反应

以[Bmim]Cl/FeCl₃(三氯化铁/氯化丁基甲基咪唑)离子液体作为反应介质和催化剂, 考察了离子液体的酸度、反应温度及反应时间对α-生育酚与β-D-五乙酰吡喃型葡萄糖糖基化反应的影响. 结果表明, 离子液体的催化活性与其酸强度密切相关, 离子液体的酸性越强, 其对此糖基化反应催化活性越高. 在FeCl₃与[Bmim]Cl物质的量比为2的[Bmim]Cl/FeCl₃离子液中, α-生育酚与β-D-五乙酰吡喃型葡萄糖在45 ℃下反应3 h, 可以得到较高的转化率, α-生育酚的转化率最高可达70.2%. 同有机溶剂作为反应介质相比, 反应条件温和, 反应时间短, 室温离子液体具有更好的催化活性, 所得产物与离子液体不溶, 便于分离, 催化体系可循环使用, 且对环境友好.     

离子液体提取分离鹿藿中异黄酮化合物

以1-丁基-3-甲基咪唑四氟硼酸盐（[Bmim]BF4）离子液体取代天然产物研究中的溶剂,对具有抗雄性生育活性和抑菌作用的鹿藿根中的异黄酮成分进行提取和分离。 从鹿藿根的70%乙醇粗提物中,成功分离纯化得到3种异黄酮类化合物,它们均是首次从植物鹿藿中分离得到。 经过波谱分析鉴定,3种化合物的结构被确定为木豆酮（Cajanone）、鸡豆黄素A(Biochanin A)和1种新的异黄酮类化合物,被命名为3-[4′-(1″-甲氧基)-丙基氧代]-苯基-5,7-二羟基异黄酮(3-[4′-(1″-methoxy)propoxy]-phenyl-5,7-dihydroxy-isoflavone)。 建立了植物鹿藿中异黄酮含量的测定方法：以木豆酮化合物为标准品,在其紫外最大吸收峰270 nm处,测得生药中总异黄酮的含量为0.73%;测得平均加样回收率99.94%,相对标准偏差3.66%,离子液体回收率76.7%。     

Polymerization of phenylacetylene catalysed by RhTp(cod) and RhBp(cod) in ionic liquids: effect of alcohols and of tetraammonium halides

RhTp(cod) ( 1 ) and RhBp(cod) ( 2 ), almost inactive in CH₂Cl₂, became good catalysts of phenylacetylene polymerization in ionic liquids ([bmim]Cl, [bmim]BF₄: bmim = 1‐butyl‐3‐methylimidazolium, [mokt]BF₄: mokt = 1‐methyl‐3‐oktylimidazolium, [bumepy]BF₄: 1‐butyl‐4‐methylpyridinium) and in CH₂Cl₂ in the presence of tetraammonium halides ([R₄N]X, R = Bu, Et; X = Cl, Br). The highest yields of polyphenylacetylene with catalyst 1 were obtained in [bmim]Cl at 65°C (64% after 2 h) and in [mokt]BF₄ at 20°C (56% after 24 h). In alcohols (CH₃OH, (CH₃)₂CHOH, (CH₃)₃COH) as solvents, up to 100% of the polymer was produced. When a mixture of an ionic liquid and CH₃OH was used as the reaction medium, the polymer yield was similar to the yield achieved in an ionic liquid only, but the molecular weight increased remarkably. Tetraammonium salts, [R₄N]X, are co‐catalysts for 1 , and the yield of the polymer increased in the order [Et₄N]Br < [Bu₄N]Br < [Et₄N]Cl < [Bu₄N]Cl. Polymers with molecular weights from 6900 to 38 800 Da were obtained with catalyst 2 in [R₄N]Br or [R₄N]Cl, whereas in ionic liquids ([bmim]Cl, [bmim]BF₄) the corresponding molecular weights were higher, from 51 300 to 60 300 Da. Copyright © 2004 John Wiley & Sons, Ltd.     

咪唑类离子液体辅助水热法合成棒状微/纳米ZnO晶体

以醋酸锌和氢氧化钠为原料, 以水和含不同长度烷基链的咪唑类氯盐离子液体的混合物作为反应介质, 采用水热法合成出不同形貌的微/纳米ZnO晶体, 用扫描电子显微镜(SEM)和X射线衍射仪(XRD)对合成的ZnO晶体进行表征. 研究了烷基链长度、 离子液体用量、 反应时间以及反应温度对形成棒状ZnO晶体形貌的影响. 实验结果表明, 所制备的棒状ZnO晶体样品均为六方晶系结构. 在棒状ZnO晶体的制备过程中, 控制反应温度, 选择不同的离子液体及其用量十分重要.     

Uranyl complexation by chloride ions. Formation of a tetrachlorouranium(VI) complex in room temperature ionic liquids [Bmim][Tf2N] and [MeBu3N][Tf2N

The tetrachlorouranium(VI) complex is formed in [Bmim][Tf2N] and [MeBu3N][Tf2N] from a uranium(VI) solution in the presence of a stoichiometric quantity of chloride ions. The [UVIO2Cl4]2- absorption and emission spectra show bands splitting in comparison with the [UVIO2]2+ spectra, as observed in the solid state, organic solvents, and chloroaluminate-based ionic liquids. The fluorescence lifetime of [UO2Cl4]2- in [MeBu3N][Tf2N] is 0.7 +/- 0.1 mus. The reduction potential of this complex is -1.44 and -1.8 V vs Ag/Ag+ respectively in [Bmim][Tf2N] and [MeBu3N][Tf2N] and does not depend on the chloride concentration. The mechanism proposed for the redox process is a monoelectronic reduction to form [UVO2Cl4]3-, followed by a chemical reaction. The tetrachlorouranium(V) complex seems more stable in [Bmim][Tf2N] than in [MeBu3N][Tf2N]. The electrochemical analysis put in evidence specific interactions of the ionic liquid cation with the uranium anionic species.     

Nanoscale organization of ionic liquids and their interaction with peptides probed by C NMR spectroscopy

An NMR study of 10 l-alanine- and l-valine-containing peptides was carried out in the native [C₂MIM][Cl], [C₄MIM][Cl], [C₆MIM][Cl], [C₄MIM][BF₄], [C₄MIM][PF₆], and [C₄Py][BF₄] ionic liquid media. A unique high sensitivity of the ionic liquid system to the nature of peptide and ability to tune solvent–solute interactions were observed in contrast to regular organic solvents. The l-valine peptides can be selectively dissolved in [C₄MIM][Cl] and [C₆MIM][Cl], whereas their solubility in [C₂MIM][Cl] and other ionic liquids was dramatically lower. In spite of structural similarity between the amino acids, a distinct behavior was observed for the l-alanine peptides. Solvent–solute interactions with an ionic liquid impose significant changes, and NMR spectroscopy is a useful probe for the molecular-level and nanoscale organization of the studied systems. An even/odd effect of the number of amino acids in the peptide on molecular interactions in ionic liquids was observed. Enhancement of chemical properties of peptides in ionic liquids and application of ionic liquids in the separation of peptides are the areas of practical interest in the studied systems.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Catalytic performance of [Bmim][Co(CO)4] functional ionic liquids for preparation of 1,3-propanediol by coupling of hydroesterification-hydrogenation from ethylene oxide

In this paper, synthesis of 1,3-propanediol (1,3-PDO) through coupling of hydroesterification-hydrogenation from ethylene oxide (EO) catalyzed by 1-butyl-3-methylimidazolium cobalt tetracarbonyl [Bmim][Co(CO)₄] functional ionic liquid which was prepared by metathesis reaction between [Bmim]Cl and KCo(CO)₄ has been studied. The structure of [Bmim][Co(CO)₄] was characterized by FT-IR and ¹H NMR. Using [Bmim][Co(CO)₄] as catalyst and [Bmim]PF₆ as solvent, 1,3-PDO was prepared for the first time by coupling of hydroesterifaction of EO and hydrogenation of methyl 3-hydroxypropionate (3-HPM). The yield of 3-HPM can reach 90.8%, while the yield of 1,3-PDO up to 82.9%. The catalyst can be separated from the product mixture by extraction with deionized water and recycled several times without significant loss of catalytic efficiency. A possible reaction mechanism has also been proposed.     

含氰基基团的以C为中心的不对称阴离子离子液体的合成、表征及应用

首次通过不对称阴离子的钠盐/钾盐和不同的季胺化的咪唑,吡咯溴盐/氯盐进行离子交换,合成了一系列含氰基官能团的不对称阴离子功能化离子液体。通过红外、核磁共振、质谱和元素分析对离子液体的结构进行表征;通过TGA对离子液体的热稳定性进行测定,结果发现不对称功能化离子液体具有良好的热稳定性,其分解温度在219-319℃范围内。将功能化离子液体[Bmim][C(CN)2COCH3]作为弱配体应用于模型的Suzuki偶联反应,发现在反应中加入功能化离子液体[Bmim][C(CN)2COCH3]可以使反应收率提高10-15%。     

Phase equilibrium and macrolide antibiotics partitioning in real water samples using a two-phase system composed of the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate and an aqueous solution of an inorganic salt

An ionic liquid-salt aqueous two-phase system (ILATPS) based on the hydrophilic ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF₄) and inorganic salt was developed for direct separation and analysis of macrolide antibiotics coupled with molecular fluorescence spectrophotometry. Liquid–liquid equilibria of [Bmim]BF₄-salt aqueous two-phase systems were studied for different salts and temperatures. It was found that the salting-out ability of different salts may be related to the Gibbs energy of hydration of the ions, and the two-phase area was expanded with a decrease in temperature. The partition coefficients as well as extraction efficiencies of azithromycin and mydecamycin in [Bmim]BF₄-salt aqueous two-phase system were influenced by the types of salts, concentration of salt, and the extracting temperature. Under the optimum conditions, the average partition coefficient of azithromycin in [Bmim]BF₄-Na₂CO₃ ILATPS was 162, and that of mydecamycin in [Bmim]BF₄- NaH₂PO₄ ILATPS was 90.9. This method has been satisfactorily applied to the determination of azithromycin and mydecamycin in real water samples with detection limits of 0.059 µg mL^?1 and 0.019 µg mL^?1. This extraction method is a simple, non-toxic and effective sample pretreatment technique with promise also for the separation of other small biomolecules.     

Ionic liquids enhanced oil recovery from oily sludge-experiment and mechanism

The oily sludge would cause environment pollution, and would cause the heavy oil waste. Therefore, it was vital for us to find novel methods to obtain heavy oil from the oily sludges. In this study, the [C₁₂mim][PF₆] and [C₁₂mim][Br] ionic liquids(ILs) were used to enhance the oil recovery. The toluene could obtain the highest oil recovery, and both the two ILs could increase the oil recovery. Toluene could obtain the highest oil recovery (89.4 wt%), and n-octane could obtain the lowest oil recovery (76.8 wt%). [C₁₂mim] [PF₆] could efficiently increase the heavy oil recovery to 91.2 wt%(by toluene). The [C₁₂mim][Br] could increase the heavy oil recovery further. Both the [C₁₂mim] [PF₆] and the [C₁₂mim][Br] ionic liquids could increase the heavy ois C/H ratio, decrease heavy oil viscosity and increase the sands hydrophilicity. The [C₁₂mim][Br] ionic liquids showed better effect. In addition, the ionic liquids could increase the solvents recovery, and the ionic liquids recovery were high. Therefore, the ionic liquids enhanced oil recovery could be recycled to ten times. The two ionic liquids could effectively decrease the heavy oil interaction force, and when the ionic liquids increased to 200 ppm, the force remained stable. In the end, the ionic liquids enhancing solvent extraction mechanism was put forward.