炸药多点起爆超高速光电分幅摄影技术研究

为获得炸药多点起爆的爆轰波传播过程精细细节,研究相适应的超高速光电分幅摄影技术,采用自主研制的超高速光电分幅相机,结合有机玻璃光快门,拍摄到以HMX和以TATB为基的塑料粘结炸药在三点同步起爆条件下纳秒时间分辨爆轰波发展高清晰序列图像,成功观察到爆轰波的整个传播及相互作用过程,捕获到内聚相互作用、马赫杆等波形细节结构。实验结果表明:超高速光电分幅摄影技术基于独立曝光模式,且具有曝光时间短、幅间隔连续可调、空间分辨高等优势,可精细观察到爆轰波传播、相互作用细节信息,该实验方法及其结果对于爆轰波相互作用及爆轰波马赫反射等问题研究具有一定的参考价值。     

钝感炸药点火增长模型的欧拉数值模拟

在自主研发的二维多介质欧拉弹塑性流体力学程序中,通过引入点火增长的反应率模型以及炸药 减敏模型,借助网格自适应技术,研究钝感炸药的冲击点火、直径效应以及死区形成等爆轰现象。数值模拟结 果表明,该程序能够正确模拟平面爆轰波的爆速、CJ状态、vonNeumann尖点等爆轰参数;并能够较好模拟炸 药的直径效应。另外,通过引入考虑减敏效应的反应率模型,能较好地模拟钝感炸药的死区形成过程。     

Numerical simulation of Composition B high explosive charge desensitization in gap test assembly after loading by precursor wave

Results of numerical research into the desensitization of high explosive charges in water gap test-based experimental assemblies are presented. The experimental data are discussed, and the analysis using ANSYS AUTODYN 14.5 is provided. The desensitization phenomenon is well reproduced in numerical simulation using the JWL EOS and the Lee–Tarver kinetic equation for modeling of the initiation of heterogeneous high explosives with as well as without shock front waves. The analysis of the wave processes occurring during the initiation of the acceptor HE charge has been carried out. Peculiarities of the wave processes in the water gap test assemblies, which can influence the results of sensitivity measurement, have been studied. In particular, it has been established that precursor waves in the walls of the gap test assemblies can influence the detonation transmission distance.     

小不耦合系数装药爆破孔壁压力峰值计算方法

基于轮廓爆破孔壁压力峰值计算方法的相关研究,充分考虑空气冲击波的传播与爆轰产物膨胀的过程,理论分析了小不耦合系数装药爆破过程中空气冲击波与炮孔壁的相互作用,建立了三维空气介质径向不耦合装药单孔爆破有限元模型,研究了工程爆破中常用的多种小不耦合系数装药组合工况下,炸药单点起爆后的炮孔壁压力峰值,并获得了相应工况下的孔壁压力峰值较爆生气体准静态等熵膨胀压力的压力增大倍数。结果表明:小不耦合系数装药爆破过程中,爆轰产物参数会对空气冲击波波后物质参数产生显著影响,揭示了小不耦合系数装药爆破与轮廓爆破在孔壁压力峰值计算方法上的本质差异;柱状装药结构爆轰波沿轴向传播使得空气冲击波撞击炮孔壁时存在叠加效应,孔壁压力峰值也相应增大,通过统计分析不同炸药类型、不同岩石类型工况下压力增大倍数与不耦合系数的关系,发现压力增大倍数随不耦合系数的增大近似呈线性增长;基于理论推导结果及常用爆破孔壁压力峰值计算形式,综合考虑炸药性能、孔壁岩石介质条件、不耦合装药系数对空气冲击波撞击炮孔壁后压力增大倍数的影响,提出了不耦合系数较小时爆破孔壁压力峰值计算方法。     

T型管内流动气体中爆轰绕射过程的数值模拟

基于带化学反应的二维Euler方程,对H₂、O₂、Ar体积比为2:1:1的混合气体系统在T型管内的爆轰绕射进行了数值模拟。用二阶附加半隐的Runge-Kutta法和五阶WENO格式分别离散欧拉方程的时间和空间导数项,采用9组分48步基元反应简化模型描述爆轰波在静止系统和流动系统中的传播过程,得到了温度、压力、典型组元H质量分数的分布及数值胞格结构。结果表明:在流动系统中,迎风面上波阵面为斜爆轰结构,静止系统两侧和顺风面上的波阵面为完全解耦的前导激波;在水平管中,波阵面与上下壁面经历一系列马赫碰撞后,最终形成正爆轰;在流动系统中,胞格结构明显向下游偏移;横向爆轰波的产生对爆轰波的再生起到了关键作用。     

锥形长药柱水下爆炸冲击波参数计算方法

为了计算锥形长药柱水下爆炸冲击波压力,以及研究长脉宽冲击波的传输特性,基于叠加原理建立了冲击波压力-时间曲线的计算方法,通过实验验证了该方法的有效性,在此基础上分析了锥形长药柱不同方位冲击波压力的分布规律。研究结果表明:锥形长药柱产生的冲击波压力具有各向异性,在起爆端一侧形成的是具有厚波头特征的低幅值长脉宽冲击波,在装药径向形成的是接近指数衰减的高幅值冲击波,而在远离起爆端的冲击波压力幅值和脉宽则介于前两者之间。锥形长药柱与球形装药冲击波分布的差异是由于装药形状和起爆方式的改变所导致的,由于装药不同部位起爆的时间差,导致水下爆炸冲击波在不同位置的叠加效果存在明显差异,药柱周围流场中形成的冲击波压力具有方向性。利用提出的计算方法得到的计算结果与实验结果和数值模拟结果吻合较好,研究结果可为锥形长药柱水下爆炸冲击波威力场和毁伤评估提供参考和依据。     

一维与二维爆轰传播的时空关联特性数值研究

一维爆轰传播的理论完备、计算准确, 二维斜爆轰传播由于壁面与黏性效应, 大尺度、高精度预测还有一定难度. 利用Euler方程和H₂-Air基元反应模型, 对二维有限长楔面诱导的斜爆轰和活塞驱动一维非定常正爆轰进行计算比较研究, 从时空两个维度方面, 分析了两者在起爆过程、稀疏波传播、爆轰波面演化中的关联特性. 研究结果表明: 在过驱动度相同的条件下, 经过时空变换的活塞驱动一维爆轰传播与二维驻定斜爆轰在起爆区波系结构、波面演化特征和主要参数分布规律方面无论定性或者定量对比均符合较好, 所以, 一维非定常爆轰和二维驻定斜爆轰具有时空相关性. 两者的差异主要体现在过驱动斜爆轰受稀疏波影响过渡到近Chapman-Jouguet (C-J)爆轰状态所需的弛豫时间不同, 原因可能是起源于活塞和壁面稀疏波强度的差异. 本文提出的一维与二维爆轰传播的时空关联方法不仅有助于认知斜爆轰起爆、过驱爆轰产生、胞格爆轰演化的三阶段规律, 还可以对比揭示壁面、边界层和黏性效应的影响, 应用在斜爆轰发动机燃烧室设计中能够有效节约计算时间和成本, 并降低复杂度.      

Relaxation of overdriven detonation waves with finite reaction rate

A numerical study is made of the interaction of a detonation wave having finite reaction velocity with a rarefaction wave of different intensity which approaches it from the rear, for the Zeldovich-Neumann-Doring (ZND) model with a single irreversible reaction A B. It is found that, for a fixed value of the parameter characterizing the initial supercompression (depending on the activation energy and the heating value of the mixture), the considered interaction leads either to a gradual relaxation of the detonation wave and its transition to the Chapman-Jouguet (CJ) regime, or to the development of undamped oscillations.Interest in the problems of detonation and supersonic combustion has increased in recent years. This is associated with the appearance and development of new experimental and theoretical techniques; it is also associated with the further development of air-breathing reaction engines, and other practical requirements. The present state of detonation theory is reflected in the survey [1].It has been established [2] that the detonation wave in gases nearly always has a complex nonuniform structure. Transverse disturbances are observed under a wide range of conditions and differ both in amplitude and wavelength. At the same time, behind the detonation leading front there is a region of uncompletely burned gas corresponding to the effective ignition induction period [3]. In spinning detonation the induction period is significantly longer than the heat release period and transverse detonation waves traveling in the induction zone of the head wave appear [3, 4]. Such a secondary detonation wave is free of transverse disturbances. The same is true of the detonation waves observed in the wake behind a body moving at high speed in a combustible medium [5] or in a gas which has been preheated by a shock wave [6].Although it is possible, under favorable conditions, to study in detail the system of discontinuities accompanying detonation, information on the extensive zones in which heat release takes place is scarce, the mechanism of detonation wave autonomy (in particular, the role of the rarefaction zone behind the wave) is not entirely clear, and the fact that, in spite of the complex structure, an autonomous detonation propagates with the CJ velocity calculated on the basis of one-dimensional theory has not yet been explained.In studying the nonlinear phenomena associated with the finite reaction rate it is quite acceptable to investigate only the simple one-dimensional detonation model, with which it is convenient to restrict ourselves to a single effective chemical reaction. This model is particularly reasonable since, in certain cases, the real detonation is virtually one-dimensional.The question of the stability of the one-dimensional detonation wave to disturbances of its structure has been examined by several authors [7–13]. The use of computers makes possible the direct computation of flows with heat release and the study of their properties. This method has been used in [11–13] to study the stability problem for a detonation wave with respect to finite disturbances.In the present paper we present a numerical study of the interaction of a detonation wave having finite chemical reaction rate with a rarefaction wave of different intensity approaching it from the rear for the ZND model with a single irreversible reaction A B. It is found that for a fixed value of the parameter characterizing the difference between detonation and the CJ waves, depending on the activation energy E and the mixture heating value Q_m, the interaction in question leads either to a gradual relaxation of the detonation wave and its transition to the CJ regime (this relaxation may be accompanied by decaying oscillations) or to the appearance of undamped oscillations (the unstable regime). The parameters E and Q_m affect the wave stability differently: with increase of Q_m, the wave is stabilized; with increase of E, it is destabilized. The boundary between the stable and unstable detonation wave propagation regimes is found. This boundary has a weak dependence on the rarefaction wave intensity. Estimates and calculated examples show that the amplitude of the unstable wave oscillations is finite and that the average detonation propagation velocity is close to the CJ velocity computed for the given heating value Qm.The author wishes to thank G. G. Chernyi for his guidance and L. A. Chudov for advice on computational questions.     

Experimental technique for generating fast high-density shock waves with phased linear explosive shock tubes

The sequential detonation of a layer of explosive surrounding a pressurized tube can be used to generate fast, high-density shock waves by means of a piston-like implosive pinch travelling at the detonation velocity of the explosive. A novel technique has been developed to extend the regime of operation to piston velocities greater than the detonation velocity of known explosives. This technique consists of cutting a slit in the tamper of a conventional explosive shock tube and introducing a phased detonation wave into the explosive cladding. Preliminary results indicate that quasi-steady shocks can be generated in helium with velocities between 13–17 km/s for initial fill pressures of 6.9 MPa.     

正向爆轰驱动高焓激波风洞的数值模拟

对充满氢氧可燃气体、带扩容腔的正向爆轰驱动的激波风洞进行了数值模拟。计算采用了欧拉方程,频散可控耗散差分格式（DCD）和改进的二阶段化学反应模型。在扩容腔附近采用二维轴对称计算模型,而在驱动段和被驱动段的直管道部分则采用一维计算模型。本文分析了爆轰波在管道中的传播、反射和绕射过程。计算结果表明扩容腔的尺寸对爆轰波的传播、反射、汇聚等起着决定性的作用;带扩容腔的正向爆轰驱动的激波风洞能够得到平稳的持续时间较长的气流,提高了实验的精确度和可重复性。     

斜爆轰发动机的推力性能理论分析

爆轰燃烧具有释热快、循环热效率高的特点. 斜爆轰发动机利用斜爆轰波进行燃烧组织, 在高超声速吸气式推进系统中具有重要地位. 以往研究主要关注斜爆轰波的起爆、驻定以及波系结构等, 缺少从整体层面出发对斜爆轰发动机开展推力性能分析. 本文将斜爆轰发动机内的流动和燃烧过程分解成进气压缩、燃料掺混、燃烧释热和排气膨胀4个基本模块并分别进行理论求解, 建立了斜爆轰发动机推力性能的理论分析模型. 在斜爆轰波系研究成果的基础上, 选取了过驱动斜爆轰、Chapman?Jouguet斜爆轰、过驱动正爆轰和斜激波诱导等容燃烧等4种燃烧模式来描述燃烧室内的燃烧释热过程, 并对比分析了不同燃烧模式对发动机比冲性能的影响. 此外, 还获得了不同来流参数、燃烧室参数和进排气参数等对发动机推力的影响规律, 发现来流马赫数和尾喷管的膨胀面积比是发动机理论燃料比冲的主要影响因素. 最后, 结合以往关于受限空间内斜爆轰波驻定特性等方面的研究成果, 提出了斜爆轰发动机燃烧室的设计方向.      

Modeling spherical explosions with aluminized energetic materials

This paper deals with the numerical solution and validation of a reactive flow model dedicated to the study of spherical explosions with an aluminized energetic material. Situations related to air blast as well as underwater explosions are examined. Such situations involve multiscale phenomena associated with the detonation reaction zone, the aluminium reaction zone, the shock propagation distance and the bubble oscillation period. A detonation tracking method is developed in order to avoid the detonation structure computation. An ALE formulation is combined to the detonation tracking method in order to solve the material interface between detonation products and the environment as well as shock propagation. The model and the algorithm are then validated over a wide range of spherical explosions involving several types of explosives, both in air and liquid water environment. Large-scale experiments have been done in order to determine the blast wave effects with explosive compositions of variable aluminium content. In all situations the agreement between computed and experimental results is very good.     

超音速来流中爆轰波衍射和二次起爆过程研究

预爆管技术被广泛地应用在爆轰波发动机的起爆过程中，但是在超音速来流中基于预爆管技术起始爆轰波的研究并未被广泛地开展。基于此，本文中数值研究了横向超音速来流对半自由空间内爆轰波的衍射和自发二次起爆、及管道内的衍射和壁面反射二次起爆两种现象的影响。数值模拟的控制方程为二维欧拉方程，空间上使用五阶WENO格式进行数值离散，采用带有诱导步的两步链分支化学反应模型。所模拟的爆轰波具有规则的胞格结构，对应于用惰性气体高度稀释过的可爆混合物中形成的爆轰波。结果表明:在半自由空间内，在本文所模拟的几何尺寸下，爆轰波并未成功发生二次起爆现象，但是爆轰波的自持传播距离随着横向超音速来流强度的增强而增加。在核心的三角形流动区域外，波面诱导产生了更多的横波结构；在管道内，横向的超音速来流在逆流侧对出口气流产生了压缩作用，能有效提高波面压力，因此反射后的激波压力也比较高。在同样的几何尺寸下，爆轰波在静止和超音速(Ma=2.0)气流中分别出现了二次起爆失败和成功两种现象，这是由于在超音速来流中化学反应面的褶皱诱导产生了横波结构，横波与管壁以及其他横波之间的碰撞提高了前导激波的强度，并最终促进了爆轰波在超声速流主管道内的成功起始。     

几种常用炸药的爆压与爆轰反应区精密测量

为了获得几种常用炸药的爆压和反应区宽度数据,采用激光干涉测试技术对TNT、PETN、RDX、HMX、TATB和CL-20炸药的稳态爆轰波界面粒子速度进行了测试,获得了高精度的界面粒子速度时程曲线,利用阻抗匹配公式计算得到了炸药的爆压。结果表明:PETN、RDX、HMX和CL-20等理想炸药的界面粒子速度曲线存在较明显的拐点,爆轰反应区较窄,反应时间为7~15 ns。TNT和TATB炸药由于存在碳凝聚慢反应过程,界面粒子速度曲线没有明显的拐点,爆轰反应时间分别为（100±15） ns和（255±20） ns。初步的不确定度分析表明,激光干涉法测试爆压的相对扩展不确定度为4.4%（包含因子k=2）。     

Transition of plane overdriven detonation wave to the Chapman-Jouguet regime

The asymptotic laws of behavior for plane, cylindrical, and spherical infinitely thin detonation waves were found in [1, 2] for increasing distance from an igniting source in those cases in which the waves changed into Chapman-Jouguet waves as they decayed. It was shown that the plane overdriven detonation wave approaches the Chapman-Jouguet regime asymptotically, while the transition of the cylindrical or spherical strong detonation wave into the Chapman-Jouguet wave may occur at a finite distance from the initiation source.Similar conclusions are valid for the propagation of stationary steadystate detonation waves which arise with flow of combustible gas mixtures past bodies.However, numerous experiments [3, 4] on firing bodies in a detonating gas show that the overdriven detonation wave which forms ahead of the body decays and decomposes into an ordinary compression shock and a slow combustion front. To establish why the wave does not make the transition to the Chapman-Jouguet regime, in the following we consider the propagation of a plane detonation wave and account for finite chemical reaction rates. We use the very simple two-front model (ordinary shock wave and following flame front). Conditions are found for which transition to the Chapman-Jouguet regime does not occur. We first consider the propagation of an unsteady plane wave and then the steady plane wave. It is found that for all the mixtures used in these experiments transition to the Chapman-Jouguet regime is not possible within the framework of the assumed model.     

Fundamentals of rotating detonations

A rotating detonation propagating at nearly Chapman–Jouguet velocity is numerically stabilized on a two-dimensional simple chemistry flow model. Under purely axial injection of a combustible mixture from the head end of a toroidal section of coaxial cylinders, the rotating detonation is proven to give no average angular momentum at any cross section, giving an axial flow. The detonation wavelet connected with an oblique shock wave ensuing to the downstream has a feature of unconfined detonation, causing a deficit in its propagation velocity. Due to Kelvin–Helmholtz instability existing on the interface of an injected combustible, unburnt gas pockets are formed to enter the junction between the detonation and oblique shock waves, generating strong explosions propagating to both directions. Calculated specific impulse is as high as 4,700 s.      

Shock and detonation wave diffraction at a sudden expansion in gas–particle mixtures

Numerical modeling of the propagation of shock and detonation waves is carried out in a duct with an abrupt expansion for a heterogeneous mixture of fine particles of aluminum and oxygen. A considerable difference from corresponding flows in pure gas is found. The influence of the size and mass loading of particles on the flow and shock wave structure behind the backward-facing step is determined. As in gaseous detonations, three types of scenarios of detonation development are obtained. Specific features of the flow structure are revealed such as deformation of the combustion front due to interaction between the relaxation zone and the vortex structure. The influence of particle size and channel width on detonation propagation is analyzed. This paper is based on work that was presented at the 21th International Colloquium on the Dynamics of Explosions and Reactive Systems, Poitiers, France, July 23–27, 2007.     

激波诱导火焰失稳与爆轰的条件研究

采用九阶WENO和十阶中心差分格式数值求解激波与火焰作用过程,考察了激波强度、火焰尺寸对激波与球形火焰作用过程的影响。结果表明,增大激波强度或火焰尺寸均可在流场中引发爆轰,但激波强度的影响更大,并且其引发的爆轰可使火焰迅速膨胀,放热率提高,从而影响燃烧特性;此外,爆轰波传播过程中会迅速消耗可燃预混气,合并原有的反射激波,并在流场中形成局部高压区,极大地改变流场结构。     

高-低爆速圆板炸药串联爆轰引起平面爆轰波的变凸现象

为分析高-低爆速圆板炸药于空中串联爆轰时平面爆轰波在传播过程中演变成凸面波的现象,分别对平面爆轰波阵面后爆轰产物状态参数的分布、有效药量与柱面装药几何尺寸的关系、爆轰产物的状态方程及强爆轰关系式进行了讨论。并以100 mm50 mm的TNT与RC炸药串联爆轰为例,描述了平面爆轰波演变为凸面爆轰波的过程,预估了爆轰波的平面范围和波形差。预估结果与实验结果基本符合。     

含铝炸药能量释放的简化模型

为了在水下爆炸效应中反映出非理想爆轰特性的影响,建立了含铝炸药非理想爆轰能量释放的简化模型。该模型以CJ爆轰理论和二次反应理论为基础,把含铝炸药化学反应划分为快速反应和慢速反应,以释放的化学能和慢反应速率常数作为非理想特征参数,并应用于一维数值模拟。计算结果与基本实验结果一致,冲击波峰值的计算误差不大于10％,衰减时间常数的误差小于5％,冲击波能与实验值也具有良好的一致性。简化模型合理地描述了含铝炸药非理想爆轰的主要过程及非理想特性,可应用于含铝炸药的设计和爆炸效应的分析。