共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
3.
利用VC 6.0和ProToolkit软件对Pro/E进行开发,从而对锻压机上某些典型零件达到快速设计的目的. 相似文献
4.
针对复杂的系列产品,以实现快速设计,并为后续的仿真和制造提供数字化模型为目标,提出基于特征的系列产品中性结构建模方法,研究了产品级的参数化设计方法;以2K-V型减速器系列产品的设计为例,在Pro/E环境下建立产品的中性结构模型,利用Pro/FOOLKIT开发工具实现了中性结构模型到产品设计实例的快速映射;开发了2K-V型减速器参数化设计系统,实现了系列产品的参数化快速设计,该参数化设计方法对其他产品的设计具有广泛的参考借鉴价值. 相似文献
5.
6.
组合机床设计量大,工作复杂,市场竞争十分激烈。提高组合机床设计水平,是提高企业创造能力,提升企业产品竞争力的关键。通过Pro/E参数化技术,构建组合机床零部件三维参数化模型,综合Top-Down技术与VS NET技术进行组合机床设计系统开发,在组合机床设计系统中实现自动装配技术开发。实践证明,该系统运行无冲突,稳定性良好,应用前景广阔。 相似文献
7.
基于Pro/E二次开发的机械产品的三维参数化设计 总被引:1,自引:0,他引:1
采用Pro/Program模块对Pro/E进行二次开发,实现了产品整机模型的结构参数化设计.大大地简化了产品设计的过程,提高了设计效率和设计质量.作为应用实例,对弧面凸轮机械手产品进行了研究.通过对产品装配模型中原始结构设计参数的重新赋值,利用参数关联和传递的驱动机制,自动生成满足产品设计要求的三维参数化结构模型,快速地完成的产品的变形设计. 相似文献
8.
9.
以Visual C 6.0为开发工具,运用基于组合原理的概念创新设计理论与方法,以Pro/E为开发平台,设计开发了产品形态创新设计系统.该系统可按照给定的组合条件完成多种基本形态的快速组合,进而获得多个产品造型方案,并可将选定的方案输入到3DS MAX中渲染,最终得到产品造型设计效果图.文章最后给出了应用实例. 相似文献
10.
11.
一个完善的CAD系统应该提供产品设计意图的有关信息 ,以使得设计意图能在设计者之间共享。给出一个设计意图的模型 ,可供产品再设计时参考。 相似文献
12.
多功能参数与设计成本的灰色模拟及灰关联分析 总被引:1,自引:0,他引:1
本文根据灰色系统理论,建立了多功能参数与设计成本之间的灰色模型,获得了较满意的模拟效果;并对设计成本与各功能参数之间的关系进行了灰关联分析。为控制产品的成本和建立参数成本优化模型提供了依据。 相似文献
13.
14.
针对定制产品变型设计中设计参数不完全的问题,提出了基于已有产品数据资源进行设计参数估计的变型设计方法.在该方法中,每一个产品的设计方案对应一组完全的设计参数,并记为一个向量,定制产品中未知的设计参数可以根据已知设计参数和已有的产品数据资源,通过极大似然估计得到.通过运用期望最大化算法,简化了设计参数极大似然估计的运算,给出了运用期望最大化算法实现未知设计参数推断的迭代过程.设计了变型设计系统的框架结构,给出了变型设计的过程.最后,用一个实例对该方法进行了验证. 相似文献
15.
T. A. Chiang A. J. C. Trappey C. C. Ku 《The International Journal of Advanced Manufacturing Technology》2006,31(5-6):421-433
Traditional computer-aided design (CAD) and product lifecycle management (PLM) tools have their limitations in supporting quick-to-market, mass-customized product development environments. The present paper proposes a general integrated framework of design knowledge representation and develops a knowledge-based intelligent system (KBIS) to facilitate dynamic design reasoning. Owing to the increasing complexity of product design, the traditional design (knowledge) rules can no longer help facilitate complex product development, which requires flexible design knowledge adoption and collaborators’ interaction during design inference processes. Therefore, this research enhances the abilities of smart collaborative design reasoning. A conceptual architecture for the KBIS is presented to enable a collaborative design community to reason feasible design parameters and to integrate all sub-system designs of a product. Finally, a case study of designing an air compressor and its sub-system (V-type belt) is presented to demonstrate the unique features of the KBIS. 相似文献
16.
17.
18.
分析顾客的需求和偏好是企业进行产品设计的一个重要环节。文章综合应用试验设计方法和联合分析技术,提出了获取和量化分析顾客偏好的一种方法,用于指导企业的产品设计,并通过一个具体案例详细说明了该方法的使用。 相似文献
19.
20.
Gongliang Jiang Hong-Zhong Huang Xianfeng Fan Qiang Miao Dan Ling 《Journal of Mechanical Science and Technology》2006,20(10):1534-1540
Concurrent Engineering (CE) is a popular method employed in product development. It treats the whole product design process
by the consideration of product quality, cost, rate of progress, and demands of customers. The development of computer and
network technologies provides a strong support to the realization of CE in practice. Aiming at the characteristics of CE and
network collaborative design, this paper built network collaborative design system frame. Through the analysis of the network
collaborative design modes based on CE, this paper provided a novel network collaborative design integration model. This model
can integrate the product design information, design process, and knowledge. Intelligent collaboration was considered in the
proposed model. The study showed that the proposed model considered main factors such as information, knowledge, and design
process in collaborative design. It has potential application in CE fields. 相似文献