共查询到20条相似文献,搜索用时 343 毫秒
1.
2.
3.
4.
针对四足机器人腿部机构的自由度多导致传动控制复杂,腿部转动惯量大导致运动性能差,关节驱动换向导致冲击能耗大等问题,基于机构综合设计了一种由曲柄摇杆机构、四边形机构复合成的单自由度连杆式机器人腿部结构.采用解析法建立了腿部机构运动学模型,为实现足端迈步运动,规划了足端轨迹,并以足端轨迹运动为优化目标,建立了优化数学模型,运用MATLAB优化得到了腿部机构尺寸.在ADAMS软件中建立了机器人虚拟样机模型,采用对角步态仿真了机器人运动特性,验证了腿部机构设计的可行性. 相似文献
5.
6.
7.
8.
9.
通过对蜘蛛结构及运动特性分析,设计了一款四足爬行机器人的结构模型;针对腿部机构构建的坐标系,对机器人的腿部模型进行运动分析,结合机器人的关节变量与足端对应的映射关系建立仿蜘蛛机器人足尖的步态轨迹方程;利用MDH法建立仿蜘蛛机器人的运动学模型,并通过adams对其进行模拟仿真;同时,利用梯度投影算法求解仿蜘蛛机器人的运动学方程,结果表明该机器人在空间的合成位移分布与复合摆线相符.通过matlab将机器人运动轨迹模型导入adams进行步态规划分析,结果表明机器人腿部的速度呈现一个个脉冲的形式,时间间隔小,运动速度均匀平稳.从而验证了运动控制方程是正确的,结构设计是合理的,仿生机器人的动作分解是可行的. 相似文献
10.
针对多足机器人在变地形环境下快速行走的问题,对多足机器人的腿部机构与运动模式进行了研究,设计了两种机器人腿部行走机构,即六连杆腿部机构与齿轮传动腿部机构,并基于这两种腿部行走机构组合了一种八足机器人。首先,对八足机器人各腿部行走机构和整体结构进行了设计分析,根据各腿部机构选择适用步态进行了研究,即前后连杆腿的对角步态与中部齿轮腿的单线直行步态;然后,研究了机器人的两种不同腿结构的行走性能,对其进行了运动学分析;最后,整体分析了机器人对角步态和越阶梯两种运动模式,并通过ADAMS软件对机器人两种运动模式进行了运动仿真,将后处理曲线与运动分析进行了对比。研究结果表明:机器人行走具有稳定性,两种运动模式具有可行性。 相似文献
11.
12.
根据广州市珠江新城旅客自动运输系统(APM)列车的运行特点,介绍APM列车制动系统的制动方式及其特点,分析APM列车动态制动和摩擦制动的工作机理及其区别和联系,阐明APM列车制动系统的电控制过程和气控制过程,从而为APM列车制动系统的维护和管理提供一定的依据. 相似文献
13.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
14.
15.
依据JJG880-2006浊度计检定规程,介绍了浊度计示值误差测量结果不确定度的评定方法,对配制标准溶液所使用的玻璃量器所引入的不确定度分量进行了分析和评定。 相似文献
16.
所谓现代化的电梯是指电梯无论在结构上还是在特性、功能上都要满足人们对电梯提出的越来越高的要求 ,这其中包括①电梯的结构———采用先进的制造工艺及控制技术 ,使电梯的结构越来越紧凑、精巧、坚固、美观及实用 ;②电梯的运行性能———采用先进的自动控制理论、先进的传动与控制技术 ,使电梯在运行过程中具有安全可靠、快速、准确、平稳的特性 ,即使电梯具有良好的乘坐舒适感。而电梯运行过程中的振动 ,则是影响电梯乘坐舒适感的“痼疾”之一 ,影响电梯运行振动的因素很多 ,其中一个因素就是隔振垫的设计。本文将以某大厦一部电梯为例… 相似文献
17.
《Mechanism and Machine Theory》1991,26(7):697-709
A method of determining polyhedrons of positioning accuracy of mechanical manipulators is developed. Practical significance of the method is illustrated by numerical examples. Polyhedrons of positioning accuracy for a manipulator of 6-R type are calculated for several positions. 相似文献
18.
A new method of decomposition of the interval of the values of random variables based on results of optimization of the nonparametric estimate of the probability density of the Rosenblatt-Parzen type is proposed. Its application in the problem of testing the hypothesis of identity of the distribution laws of two sequences of one-dimensional random variables is considered. 相似文献
19.
我公司于80年代末引进Aspera公司年产80万台冰箱(冷柜)压缩机生产线及软件技术,在压缩机加工中,活塞销孔(如图1所示)的加工是难点之一。用镗床加工,质量一直难以达到要求,废品率很高。后来我们将Aspera公司的加工工艺即精镗后滚光改为精镗后用金刚石铰刀粗、精铰孔,由此解决了这个技术难题。(1)原意大利Aspera公司工艺简述其工艺流程为:钻6.5通孔→扩孔至7+0.1→粗镗7.473+0.036、圆柱度0.01→精镗至7.935+0.006、圆柱度0.002→滚光7.938+0.006、圆柱度0… 相似文献
20.
三爪自定心卡盘作为机床的主要附件,已有一百多年的发展历史,尽管目前随着数控技术的不断发展,越来越多地需求高速动力卡盘,但三爪自定心卡盘目前仍有一定的市场。 要保证卡盘可靠地夹紧工件,必须使其有可靠的夹持精度;要保持卡盘的精度,必须要严格控制各零部件公差及误差,如盘丝的极心偏。 极心偏是形成圆的渐开线的基圆圆心 (极心 )与盘丝内孔中心不同心所造成的偏差值。它对卡盘精度的影响分两种情况,一是卡爪夹持弧采用配磨,二是卡爪夹持弧采用单磨。本文主要探讨配磨时的影响。 卡爪夹持弧采用配磨,即每台卡盘整体… 相似文献