Heat transfer over a nonlinearly stretching sheet with non-uniform heat source and variable wall temperature

In this paper we study the flow and heat transfer characteristics of a viscous fluid over a nonlinearly stretching sheet in the presence of non-uniform heat source and variable wall temperature. A similarity transformation is used to transform the governing partial differential equations to a system of nonlinear ordinary differential equations. An efficient numerical shooting technique with a fourth-order Runge–Kutta scheme is used to obtain the solution of the boundary value problem. The effects of various parameters (such as the power law index n, the Prandtl number Pr, the wall temperature parameter λ, the space dependent heat source parameter A¹ and the temperature dependent heat source parameter B¹) on the heat transfer characteristics are analyzed. The numerical results for the heat transfer coefficient (the Nusselt number) are presented for several sets of values of the parameters and are discussed. The results reveal many interesting behaviors that warrant further study on the effects of non-uniform heat source and the variable wall temperature on the heat transfer phenomena at the nonlinear stretching sheet.     

Heat transfer and hydromagnetic electroosmotic Von Kármán swirling flow from a rotating porous disc to a permeable medium with viscous heating and Joule dissipation

Magnetohydrodynamic flow and heat transfer in an ionic viscous fluid in a porous medium induced by a stretching spinning disc and modulated by electroosmosis under an axial magnetic field and radial electrical field is presented in this study. The effects of convective wall boundary conditions, Joule heating and viscous dissipation are incorporated. The governing partial differential conservation equations are transformed into a system of self-similar coupled, nonlinear ordinary differential equations with associated boundary conditions. The Matlab bvp4c solver featuring a shooting technique and the fourth-order Runge–Kutta–Fehlberg method are used to numerically solve the governing dimensionless boundary value problem. Multivariate analysis is also performed to examine the thermal characteristics. An increase in rotation parameter induces a reduction in the radial velocity, whereas it elevates the tangential velocity. Greater electrical field parameter strongly damps the radial velocity whereas it slightly decreases the tangential velocity. Increasing magnetic parameter also damps both the radial and tangential velocities. An increment in electroosmotic parameter substantially decelerates the radial flow but has a weak effect on the tangential velocity field. Increasing permeability parameter (inversely proportional to permeability) markedly damps both radial and tangential velocities. The pressure gradient is initially enhanced near the disk surface but reduced further from the disk surface with increasing magnetic parameter and electrical field parameter, whereas the opposite effect is produced with increasing Joule dissipation. Increasing magnetic and rotational parameters generate a strong heating effect and boost temperature and thermal boundary layer thickness. Nusselt number is boosted with increasing Brinkman number (viscous heating effect) and Reynolds number. The simulations are relevant to electromagnetic coating flows, bioreactors and electrochemical sensing technologies in medicine.     

Hydromagnetic flow and heat transfer of a non-Newtonian power law fluid over a vertical stretching sheet

We consider the steady state, viscous, incompressible two-dimensional magneto hydrodynamic flow of an electrically conducting power law fluid over a vertical stretching sheet. The stretching of the surface velocity and the prescribed surface temperature are assumed to vary linearly with the distance from the slit. The coupled partial differential equations governing the flow and heat transfer are transformed into non-linear coupled ordinary differential equations by a similarity transformation. The transformed boundary layer equations are solved numerically by Keller-Box method for several sets of values of the parameters governing the flow and heat transfer. The flow and heat transfer characteristics are analysed and discussed for different values of the parameters. We observe that the local skin friction coefficient and the local Nusselt number decrease as the magnetic parameter Mn increase for fixed value of the buoyancy parameter λ. The results obtained reveal many interesting behaviors that warrant further study of the equations related to non-Newtonian fluid phenomena, especially the shear-thinning phenomena. Shear thinning reduces the wall shear stress.     

Maxwell nanofluid heat and mass transfer analysis over a stretching sheet

The Buongiorno model Maxwell nanofluid flow, heat and mass transfer characteristics over a stretching sheet with a magnetic field, thermal radiation, and chemical reaction is numerically investigated in this analysis. This model incorporates the effects of Brownian motion and thermophoresis. The governing partial differential equations are transformed into a coupled nonlinear ordinary differential equation by using the similarity transformation technique. The resultant nonlinear differential equations are solved by using the Finite element method. The sketches of velocity, temperature and concentration with diverse values of magnetic field parameter (0.1 ≤ M ≤ 1.5), Deborah number (0.0 ≤ β ≤ 0.19), radiation parameter (0.1 ≤ R ≤ 0.7), Prandtl number (0.5 ≤ Pr ≤ 0.8), Brownian motion parameter (0.1 ≤ Nb ≤ 0.7), thermophoretic parameter (0.2 ≤ Nt ≤ 0.8), Chemical reaction parameter (1.0 ≤ Cr ≤ 2.5) and Lewis number (1.5 ≤ Le ≤ 3.0) have investigated and are depicted through plots. Moreover, the values of the Skin-friction coefficient, Nusselt number, and Sherwood numbers are also computed and are shown in tables. The sequels of this analysis reviewed that the values of Skin-friction coefficient and Sherwood number intensified with hiked values of Deborah number (β), whereas, the values of Nusselt number decelerate as values of (β) improves.     

Actions of viscous dissipation and Ohmic heating on bidirectional flow of a magneto-Prandtl nanofluid with prescribed heat and mass fluxes

The present contribution determines the impacts of viscous dissipation and Ohmic heating with magnetic coating on Prandtl nanofluid flow driven by an unsteady bidirectionally moveable surface. Random motion of nanoparticles and thermophoretic diffusion are elaborated through a two-phase nanofluid model. The novelty of the investigation is fortified by prescribed heat flux and prescribed mass flux mechanisms. The appropriate combination of variables leads to a system of strong nonlinear ordinary differential equations. The formulated nonlinear system is then tackled by an efficient numerical scheme, namely, the Keller–Box method. Nanoliquid-temperature and mass-concentration distributions are conferred through various plots with the impacts of miscellaneous-arising parameters. The rates of heat and mass transferences are also discussed through tables. The thermal states of the nanomaterial and mass concentration are reduced for incremental amounts of the unsteady factor, ratio parameter, elastic parameter, and Prandtl fluid parameter. Moreover, escalating amounts of the Brownian parameter, Eckert number, magnetic factor, and thermophoresis parameter enhances the temperature of the nanoliquid. An error analysis is also presented to predict the efficiency of the method used for the computational work.     

Thermal-diffusion and diffusion-thermo effects on combined heat and mass transfer of a steady MHD convective and slip flow due to a rotating disk with viscous dissipation and Ohmic heating

Thermo-diffusion (Soret effect) and diffusion-thermo (Dufour effect) effects on combined heat and mass transfer of a steady hydromagnetic convective and slip flow due to a rotating disk in the presence of viscous dissipation and Ohmic heating is investigated. The partial differential equations governing the problem under consideration have been transformed by a similarity transformation into a system of ordinary differential equations which are solved numerically by applying the shooting method. For fluids of medium molecular weight (H₂, air), profiles of the dimensionless velocity, temperature and concentration distributions are shown graphically for various values of slip parameter γ, magnetic field parameter M, Eckert Ec, Schmidt Sc, Dufour Du and Soret Sr numbers. Finally, numerical values of physical quantities, such as the local skin friction coefficient, the local Nusselt number and the local Sherwood number are presented in tabular form.     

Thermophoretic Deposition Effect on Transient Free Convection Hydromagnetic Flow Along an Accelerated Inclined Permeable Surface with Time‐Dependent Temperature and Concentration

This work investigates the thermophoretic deposition effect on a transient free convection hydromagnetic flow along an accelerated infinite inclined permeable surface in the presence of heat generation, suction (or injection), thermal diffusion, and diffusion‐thermo taking into account that the surface temperature and concentration are time dependent. The governing partial differential equations are transformed into a set of nonlinear coupled ordinary differential equations, which are then solved numerically by applying the shooting method with a sixth‐order Runge–Kutta integration scheme. Graphical results for the dimensionless velocity, temperature, concentration distributions as well as wall thermophoretic velocity are reported and examined for the pertinent parameters showing the interesting aspects of the obtained solutions. The local skin‐friction coefficient, the local Nusselt number, and the local Sherwood number are also computed. The results show that higher flow rates can be obtained when the temperature and concentration are time independent. Smaller buoyancy is observed for higher temperature indexes. Wall thermophoretic velocity is decreased with the increasing values of the Prandtl number, the thermophoretic parameter, as well as heat generation parameter. The results further show that the presence of thermal diffusion and diffusion‐thermo intensify the shear stress but reduce the rate of heat as well as mass transfer. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res, 43(4): 352–367, 2014; Published online 3 October 2013 in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21081     

Influence of thermophoretic deposition and viscous dissipation on magnetohydrodynamic flow with variable viscosity and thermal conductivity

In this study, we numerically explore the impact of varying viscosity and thermal conductivity on a magnetohydrodynamic flow problem over a moving nonisothermal vertical plate with thermophoretic effect and viscous dissipation. The boundary conditions and flow-regulating equations are converted into ordinary differential equations with the aid of similarity substitution. The MATLAB bvp4c solver is used to evaluate the numerical solution of the problem and it is validated by executing the numerical solution with previously published studies. The impacts of several factors, including the magnetic parameter, Eckert number, heat source parameter, thermal conductivity parameter, stratification parameter, Soret, Dufour, Prandtl number, and Schmidt number are calculated and shown graphically. Also, the skin friction coefficient, Nusselt number, and Sherwood number are calculated. Fluid velocity, temperature, and concentration significantly drop as the thermophoretic parameter and thermal stratification parameter increases. As thermal conductivity rises, it is seen that the velocity of the fluid and temperature inside the boundary layer rise as well. Also, the Soret effect drops temperature and concentration profile. The applications of this type of problem are found in the processes of nuclear reactors, corrosion of heat exchangers, lubrication theory, and so forth.     

Thermophoretic particle deposition and heat generation analysis of Newtonian nanofluid flow through magnetized Riga plate

The Riga surface is composed of an electromagnetic actuator that comprises a span-wise associated array of discontinuous electrodes and an everlasting magnet mounted over a planer surface. The electro-magneto-hydrodynamic has an attractive role in thermal reactors, fluidics network flow, liquid chromatography, and micro coolers. Inspired by these applications, a laminar, two-dimensional nanofluid flow with uniform heat sink-source, thermophoretic depositions of the particles, and the Newtonian heating effect are investigated. The equations that describe the fluid motion are reduced into a system of ordinary differential equations with the help of spatial similarity variables. Numeric solutions of ordinary differential equations are executed through the Runge–Kutta–Felhberg 45 order technique via a shooting scheme. The role of various nondimensional factors on physically interesting quantities is elaborated graphically. The velocity profile rises for modified Hartmann number and decreases for porosity parameter. Thermal enhancement is high in the common wall temperature condition comparative to the case of the Newtonian heating conditions. The concentration profile is enhanced with Schmidt number, but the reverse trend is observed for the thermophoretic parameter. The rate of mass transfer is increased with Schmidt number.     

Effect of heat generation or absorption on thermophoretic free convection boundary layer from a vertical flat plate embedded in a porous medium

This paper is focused on the study of coupled heat and mass transfer by boundary-layer free convection over a vertical flat plate embedded in a fluid-saturated porous medium in the presence of thermophoretic particle deposition and heat generation or absorption effects. The governing partial differential equations are transformed into ordinary differential equations by using special transformations. The resulting similarity equations are solved numerically by an efficient implicit tri-diagonal finite-difference method. Comparisons with previously published work are performed and the results are found to be in excellent agreement. Many results are obtained and a representative set is displayed graphically to illustrate the influence of the heat generation or absorption coefficient, buoyancy ratio and the Lewis number on the temperature and concentration profiles and the wall thermophoretic deposition velocity.     

Heat and mass transfer flow over a stretching surface with Ohmic heating and chemical reaction

The present study analyzes the effect of chemical reaction on an unsteady magnetohydrodynamic boundary layer viscous fluid over a stretching surface embedded in a porous medium with a uniform transverse magnetic field. A Darcy‐Forchheimer drag force model is employed to simulate the effect of second‐order porous resistance. Dissipative heat energy based on both viscous and Joule dissipation along with a heat source/sink is considered to enhance the energy equation. Similarity analysis is imposed to transform the governing differential equations into a set of nonlinear coupled ordinary differential equations. These sets of equations are solved numerically using the Runge‐Kutta fourth‐order scheme followed by the shooting algorithm. The effects of physical parameters such as magnetic field, Prandtl number, Eckert number, Schmidt number, unsteadiness parameter, and chemical reaction parameters have been discussed on velocity, temperature, and concentration fields. Computation for the coefficient of skin friction, rate of heat and mass transfer is done and presented in a table for validation of the present outcomes.     

Nonlinear convective boundary layer flow of micropolar‐couple stress nanofluids past permeable stretching sheet using Cattaneo‐Christov heat and mass flux model

The present work aims to examine the effects of viscous dissipation and unsteadiness parameters on nonlinear convective laminar boundary layer flow of micropolar‐couple stress nanofluid past a permeable stretching sheet with non‐Fourier heat flux model in the presence of suction/injection variable. The unsteadiness in the flow, temperature, and concentration profile is caused by the time‐dependence of the stretching velocity, surface temperature, and surface concentration of the boundary layer flow. Similarity transformation is applied to transform the time‐dependent boundary layer flow equations into the corresponding highly nonlinear coupled ordinary differential equations with appropriate boundary conditions. The robust numerical technique called Galerkin finite element method is used to solve the obtained dimensionless governing equations of the flow. The effects of Eckert number, unsteadiness parameter, suction/injection parameter, mixed convection parameter, material parameter, Schmidt number, and couple stress parameter on linear velocity, angular velocity, temperature, concentration, local skin friction coefficient, local wall couple stress, local Nusselt number, and local Sherwood number is analyzed with the help of graphical and tabular form. Under special conditions, the present result is compared with the existing literature and revealed good agreement. Our result shows that as unsteadiness parameter boost, both heat and mass transfer rate rises. The present study has a significant application in material processing technology.     

Influence of radiation and viscous dissipation on MHD heat transfer Casson nanofluid flow along a nonlinear stretching surface with chemical reaction

The present article investigates the influence of Joule heating and chemical reaction on magneto Casson nanofluid phenomena in the occurrence of thermal radiation through a porous inclined stretching sheet. Consideration is extended to heat absorption/generation and viscous dissipation. The governing partial differential equations were transformed into nonlinear ordinary differential equations and numerically solved using the Implicit Finite Difference technique. The article analyses the effect of various physical flow parameters on velocity, heat, and mass transfer distributions. For the various involved parameters, the graphical and numerical outcomes are established. The analysis reveals that the enhancement of the radiation parameter increases the temperature and the chemical reaction parameter decreases the concentration profile. The empirical data presented were compared with previously published findings.     

Chemical reaction,heat and mass transfer on MHD flow over a vertical stretching surface with heat source and thermal stratification effects

An analysis has been carried out to obtain the nonlinear MHD flow with heat and mass transfer characteristics of an incompressible, viscous, electrically conducting and Boussinesq fluid on a vertical stretching surface with chemical reaction and thermal stratification effects. An approximate numerical solution for the flow problem has been obtained by solving the governing equations using numerical technique. A magnetic field is applied transversely to the direction of the flow. Adopting the similarity transformation, governing nonlinear partial differential equations of the problem are transformed to nonlinear ordinary differential equations. Then the numerical solution of the problem is derived using Gill method, for different values of the dimensionless parameters. The results obtained show that the flow field is influenced appreciably by the presence of thermal stratification, chemical reaction and magnetic field.     

Radiative nanofluid flow and heat transfer between parallel disks with penetrable and stretchable walls considering Cattaneo–Christov heat flux model

In this work, we explore the unsteady squeezing flow and heat transfer of nanofluid between two parallel disks in which one of the disks is penetrable and the other is stretchable/shrinkable, in the presence of thermal radiation and heat source impacts, and considering the Cattaneo–Christov heat flux model instead of the more conventional Fourier's law of heat conduction. A similarity transformation is utilized to transmute the governing momentum and energy equations into nonlinear ordinary differential equations with the proper boundary conditions. The achieved nonlinear ordinary differential equations are solved by the Duan–Rach Approach (DRA). This method modifies the standard Adomian Decomposition Method by evaluating the inverse operators at the boundary conditions directly. The impacts of diverse active parameters, such as the suction/injection parameter, the solid volume fraction, the heat source parameter, the thermal relaxation parameter, and the radiation parameter on flow and heat transfer traits are examined. In addition, the value of the Nusselt number is calculated and portrayed through figures.     

Natural convection heat transfer from a horizontal isothermal elliptical cylinder with internal heat generation

This work examines the natural convection heat transfer from a horizontal isothermal cylinder of elliptic cross section in a Newtonian fluid with temperature dependent internal heat generation. The governing boundary layer equations are transformed into a non-dimensional form and the resulting nonlinear systems of partial differential equations are solved numerically applying cubic spline collocation method. Results for the local Nusselt number and the local skin-friction coefficient are presented as functions of eccentric angle for various values of heat generation parameters, Prandtl numbers and aspect ratios. Results show that both the heat transfer rate and skin friction of the elliptical cylinder with slender orientation are higher than the elliptical cylinder with blunt orientation. Moreover, an increase in the heat generation parameter for natural convection flow over an isothermal horizontal elliptic cylinder leads to a decrease in the heat transfer rate from the elliptical cylinder and an increase in the skin friction of the elliptical cylinder.     

Steady flow and heat transfer of the power-law fluid over a rotating disk

This paper deals with the steady flow and heat transfer of a viscous incompressible power-law fluid over a rotating infinite disk. Assumed the thermal conductivity follows the same function as the viscosity, the governing equations in the boundary layer are transformed into a set of ordinary differential equations by generalized Karman similarity transformation. The corresponding nonlinear two-point boundary value problem was solved by multi-shooting method. Numerical results indicated that the parameters of power-law index and Prandtl number have significant effects on velocity and temperature fields. The thickness of the boundary layer decays with power-law index. The peak of the radial velocity changes slightly with power- law index. The values near the boundary are affected dramatically by the thickness of the boundary layer. With the increasing of the Prandtl number the heat conducts more strongly.     

Thermochemistry and viscous heat dissipative effects on unsteady upper-convected Maxwell fluid flow past a stretching vertical plate with thermophysical variables

In this paper, unsteady upper-convected Maxwell fluid flow with variability in viscosity, thermal conductivity, and mass diffusivity is presented. The effects of chemical reaction, internal heat generation, and viscous dissipation with respect to variability properties were explored. The governing partial differential equations were transformed with the appropriate similarity transformation variables into nonlinear coupled ordinary differential equations. The spectral collocation method was used to solve the resulting ordinary differential equations. Hence, the effects of various parameters such as temperature-dependent viscosity and thermal conductivity, mass diffusivity parameters among others on velocity, temperature, concentration, skin friction, local heat and mass transfers were presented in graphs and tables. It is seen that heat and molecules of the fluid disperse faster as a result of destructive chemical reaction, while, the temperature-dependent viscosity and thermal conductivity gave increasing profiles of the momentum and thermal boundary layer. The viscous dissipative parameter generates heat and yields a buoyancy force in consequence.     

Nonlinear radiation on Maxwell fluid in a convective heat transfer with viscous dissipation and activation energy

The present analysis addresses linear and nonlinear radiation effects in hydrodynamic viscous Maxwell fluid flow on a unidirectional stretching surface through viscous dissipation. The relaxation effect is considered in the mathematical model, which elucidates mass transport mechanisms under binary chemical reaction and activation energy. Mathematical modeling contains nonlinear partial differential equations using boundary conditions. Appropriate transformations convert the partial differential equations into ordinary differential equations. Numerical solutions for regular differential equations are brought by Runge–Kutta–Fehlberg numerical quadrature and a shooting method with a tolerance level of 10⁻⁹. The influence of physical variables, such as Deborah relaxation number, rotation parameter, Biot number, activation energy parameter, reaction rate parameter, Eckert number, and Prandtl number are investigated. Increasing the Biot number improves the temperature region in the boundary layer. With high rotation, the increasing Deborah number enhances the fluid temperature substantially throughout the boundary layer.     

Heat and mass transfer of MHD Jeffrey nanofluid flow through a porous media past an inclined plate with chemical reaction,radiation, and Soret effects

This paper investigates the heat and mass transfer of an unsteady, magnetohydrodynamic incompressible water-based nanofluid (Cu and TiO₂) flow over a stretching sheet in a transverse magnetic field with thermal radiation Soret effects in the presence of heat source and chemical reaction. The governing differential equations are transformed into a set of nonlinear ordinary differential equations and solved using a regular perturbation technique with appropriate boundary conditions for various physical parameters. The effects of different physical parameters on the dimensionless velocity, temperature, and concentration profiles are depicted graphically and analyzed in detail. Finally, numerical values of the physical quantities, such as the local skin-friction coefficient, the Nusselt number, and the Sherwood number, are presented in tabular form. It is concluded that the resultant velocity reduces with increasing Jeffrey parameter and magnetic field parameter. Results describe that the velocity and temperature diminish with enhancing the thermal radiation. Both velocity and concentration are enhanced with increases of the Soret parameter. Also, it is noticed that the solutal boundary layer thickness decreases with an increase in chemical reaction parameters. This is because chemical molecular diffusivity reduces for higher values of chemical reaction parameter. Also, water-based TiO₂ nanofluids possess higher velocity than water-based Cu nanofluids. Comparisons with previously published work performed and the results are found to be in excellent agreement. This fluid flow model has several industrial applications in the field of chemical, polymer, medical science, and so forth.