Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Process monitoring using auto-associative,feed-forward artificial neural networks

The potential of using artificially simulated neural networks as intelligent, adaptive process-monitoring devices is discussed. The investigation is considered as a method for automatic, intelligent exception reporting for quality control applications. The technique is also compared with the conventional statistical approaches of principal component analysis and Kohonen's feature map. The applications of the technique in aerospace and manufacturing environments are presented and a possible extension of the method to incorporate a diagnostic function is discussed.Seconded from Cheltenham and Gloucester College of Higher Education as a Royal Society/SERC Research Fellow at Smith's Industries Aerospace and Defence Systems, Bishop's Cleeve, Cheltenham, UK.     

Video compression using spatiotemporal regularity flow.

We propose a new framework in wavelet video coding to improve the compression rate by exploiting the spatiotemporal regularity of the data. A sequence of images creates a spatiotemporal volume. This volume is said to be regular along the directions in which the pixels vary the least, hence the entropy is the lowest. The wavelet decomposition of regularized data results in a fewer number of significant coefficients, thus yielding a higher compression rate. The directions of regularity of an image sequence depend on both its motion content and spatial structure. We propose the representation of these directions by a 3-D vector field, which we refer to as the spatiotemporal regularity flow (SPREF). SPREF uses splines to approximate the directions of regularity. The compactness of the spline representation results in a low storage overhead for SPREF, which is a desired property in compression applications. Once SPREF directions are known, they can be converted into actual paths along which the data is regular. Directional decomposition of the data along these paths can be further improved by using a special class of wavelet basis called the 3-D orthonormal bandelet basis. SPREF -based video compression not only removes the temporal redundancy, but it also compensates for the spatial redundancy. Our experiments on several standard video sequences demonstrate that the proposed method results in higher compression rates as compared to the standard wavelet based compression.     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Investigations on the Three Commercial Species of Rosaceae

Physico-chemical properties of the seed oils of three species of Rosaceae family, namely Prunus armeniaca (apricot), Prunus cerasifera (prune), and Prunus persica (peach) have been determined. Fatty acid composition of the oils and amino acids composition of seed cake proteins have also been determined and their utility in every day life has been discussed.     

Morphological and mechanical studies of surface treated mica reinforced high density polyethylene

Morphological studies of high density polyethylene (HDPE) reinforced by mica flakes has been investigated. The mica flakes were surface treated by silane and titanate coupling agents. Effects of these treatments on the polymer-mica interface is discussed. It is found that surface treatment, particularly silane treated composites, have better adhesion between the reinforcing agent and the polymer matrix. This effect can only be detected when the mica concentration is higher than 20 weight percent. This interfacial adhesion could not be seen across the surface of the sample but only when the measurements were made parallel to the surface.     

Light weight model for intra mode selection in HEVC

Multimedia Tools and Applications - The High Efficiency Video Coding (HEVC) efficiently reduces the size of the multimedia contents, but at the cost of high computation complexity. In order to make...     

Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing

International Journal of Control, Automation and Systems - The surface temperature of workpieces in a multi-temperature zone sintering furnace is an important parameter to characterize the...     

Synthesis and characterization of eugenol-based silicone modified waterborne polyurethane with excellent properties

A eugenol-based silicone-containing monomer 4,4′-(1,1,3,3-tetramethyldisiloxane-1,3-dipropyl)bis-2-methoxyphenol(EUSi) was synthesized from eugenol and 1,1,3,3-tetramethyldisiloxane via the hydrosilylation reaction. And waterborne polyurethane (WPU) with excellent properties was obtained by using EUSi as a type of diol chain extender. The unique combination of rigidity and flexibility in the chemical structure of EUSi greatly facilitated the mechanical properties, thermal properties, and water resistance of WPU. With only a 3% dosage of EUSi, the maximum tensile strength was increased from 6.2 to 22.4 MPa, while the water absorption was decreased from 31.3% to a surprisingly 7.6%. Our work provides a new convenient strategy for the preparation of organosilicon-modified WPU with improved performance.     

Synthesis,characterization, and cell viability of bifunctional medical-grade polyurethane nanofiber: Functionalization by bone inducing and bacteria ablating materials

There is an extensive possibility of improving characteristics of fibers used in hard tissue engineering, being hydrophobic and less osteoconductive, resulting in the dynamic growth of new tissues. The current work focuses on the fabrication of nanofibers incorporated with titanium dioxide (TiO₂) ''as osteoconductive'' and silver (Ag) ''as self-healing'' nanoparticles (NPs). The incorporation of AgNO₃ by in situ method not only helped to impart the antibacterial activity but also changed the contact angle from 81 ± 03° in the case of pristine nanofibers to 74 ± 03°, 61 ± 03°, 50 ± 08°, and 39 ± 1.1°, in the composite scaffolds containing 0.01, 0.03, 0.05, and 0.07 M of Ag salts. The incubation in simulated body fluid at 37°C to induce mineralization on nanofiber scaffolds indicated Ca and P crystals' formation. The antibacterial activity showed significantly more toxicity toward E. coli (8.3 ± 0.9 mm) than S. aureus (1.2 ± 0.1 mm). Biocompatibility studies using MTT assay on the pre-osteoblasts showed that both TiO₂ and Ag NPs present in the nanofibers are non-toxic to the bone-like cells. However, results show that a higher concentration of Ag NPs (i.e., 0.07 M) is toxic to cells growing. Finally, all the results suggest that the nanofiber scaffolds have considerable scope for future bone tissue engineering materials.