Method for Measuring Velocity of Warhead Fragments Based on Photoelectric Detection

For measuring velocity and impacting position of single fragment of warhead, a non-contact measuring method is proposed, in which a six-light-screen array, a position indicator, a multi-channel chronograph and a computer are used.The principle of measurement is described. The key device of the system is a light screen array sensor which consists of six light screens allocated with certain geometrical parameters. When the fragment flies through the light screen array, the time of passing through each of the screens is recorded by the multi-channel chronograph. According to the time data and the geometrical parameters of the array, the velocity vector and the location of the fragment can be calculated immediately. The presented method can be used to locate the fragment and to measure the real velocity on its flying direction. It can also be used to measure the velocity of a fragment swarm after the system is engineered further.     

数码电子雷管中影响点火头性能因素分析

阐述了数码电子雷管中,点火药剂细结晶三硝基间苯二酚铅（LTNR）的制备工艺;从点火药剂的种类、加入黏合剂的质量分数、桥丝直径、点火头的电阻值、防潮漆的蘸涂等方面对点火头性能的影响因素进行了探讨;通过震动试验、并联起爆试验、延期精度检测与考核,试验结果表明：一次性合成的细结晶LTNR是制造数码电子雷管点火头较为理想的点火药剂,按技术要求生产的点火头性能指标能够满足行业标准要求。     

Stability of the Third Generation Intensifier under Illumination

The stability under illumination of transmission-mode GaAs photocathode sealed in the third generation intensifier is investigated by use of spectral response testing instruments. The variations of spectral response with the illumination times under weak and intense illumination are compared. The variations of photoemission performance parameters are also characterized. The results show that during initial several weak illuminations photocathode behaves no evident decay and a maximum sensitivity is achieved, while under intense illumination the sensitivity of photocathode begin to decrease largely at the first illumination. The calculated performance parameters show that the variation of surface escape probability with illumination times is a direct cause of instability of photocathode. It is also found that under intense illumination peak wavelength is moved towards short-wave and peak response is decreased, which shows that the ability of long-wave response of photocathode is decreased.     

Open Rule-setting System Applied to Conceptual Design of Engines

Open rule-setting method advanced in this paper concentrates on providing designers of engines with a convenient way to express their design innovations and develop the expected prototypes in the early CAD stage, and constitute effective models for the following analysis process of CAE and CAPP. The problems arisen in the process of conceptual design with the traditional experience-based development method are analyzed. Based on those analyses, open rule-setting method is presented and some associated technical problems are discussed. The functional framework of open rule-setting system was built as software engineering methods. The speciality of the engine product as a kind of complex product and the requirement of the engine product based on its structural particularity to rule-setting system are considered carefully. A demonstration is supplied to illustrate how the open rule-setting method enhances the efficiency and quality of the engine conceptual design.     

Design and Implementation of One Missile Visual Simulation System Based on OpenGL

The implementation of a missile＇s visual simulation system is explained that is developed with OpenGL（open graphic library） and the flight path and flight carriage in different stages of the missile are displayed. The establishment problems of the 3D scene are circumstantiated including the construction and redeployment of the model, creation of the virtual scene, setting of the multi-viewports and multi-windows etc. The missile＇s data driver, system flow, the modules and their mutual relations of the missile visual simulation system are discussed. The missile flight simulation results and effect of the scenes are given.     

Research on Linux Network Device Driver

By analyzing the working principle of Linux network device driver, discussing the Linux network driver structure and its key technologies, the general network driver structure and its design methodologies in Linux system are summarized. Through modifying the network device driver of Linux device driver 3rd version snull, c and improving the COW technology, the Zero-Copy technology in Linux （kernel version 2.6.11 ） is implemented. In the end, the success test tells us that the thorough analysis of network device driver is the foundation of many applications, and it also provides a certain improvement to a lot of real applications, even to military application development.     

Dynamic Encryption Technology in Ad-hoc Networks

A new dynamic encryption application in ad-hoc networks is proposed. The advantages of this method are its being able to use the previous ciphertext as a seed of a new encryption process, rendering the encryption process effective in all communication process by continuous dynamic key generation together with synchronization, and its capability to cut back on system bandages to a greater extent, which is valuable for the ad-hoc circumstance. In addition, the rationality and effectiveness of this novel encryption method have been verified by the test results.     

An Experimental Study on Electro Chemical Machining of Microelectrode

Puts forward a new method in machining microelectrode by electro chemical machining （ECM） and plastic deformed theory. The procedure of this method is to machine the microelectrode according to the basic rule of ECM theory at first. Then, with the change of ECM machining parameters, one of the microelectrode ends is exerted by a load. As a result, the elastic and plastic deformation is produced at the machining section and the microelectrode diameter is reduced. It has been proved that the proposed method can determine the optimum machining parameters to machine the microelectrode of Cu.     

Unscented Kalman Filter for Autonomous Warship Attitude Determination

To address a problem of autonomous attitude determination algorithm using gravitational field and geomagnetic field observation, a new recursive optimization autonomous attitude estimation algorithm is proposed. The algorithm is based on unscented Kalman fiher(UKF), and can synchronously provide the attitude rate information. The simulated results show that the measurement precision of the method could be increased by 2 times compared to that of the common methods.     

Error Coefficient Estimation of Inertial Platformin Its Calibration

The error coefficient estimation of inertial platform in the course of its consecutive ground calibration is studiedA separate-bias algorithm is adopted to estimate the error parameters effectively. The ill-conditioning problem of the equation solution caused by the huge state dimension is also resolved. And the simulation result shows its validity.     

An Automatic Interference Recognition Method in Spread Spectrum Communication System

An algorithm to detect and recognize interferences embedded in a direct sequence spread spectrum （DSSS） communication system is proposed. Based on Welch＇ s averaging modified periodogram method and fractional Fourier transfor- mation （FRFT）, the paper proposes a decision tree-based algorithm in which a set of decision criteria for identifying different types of interferences is developed. Simulation results demonstrate that the proposed algorithm provides a high recognition rate and is robust for various ISR and SNR.     

底排装置瞬态泄压过程数值模拟

为了研究底排弹出膛口到自由飞行阶段膛口流场发展过程以及弹丸底部参数变化,采用二维轴对称平均N-S方程和一方程S-A湍流模型研究了底排弹出膛口过程中近膛口以及底排装置内腔的流场特性。同时为了进行验证对比,研究了普通弹丸出膛口过程的近膛口流场特性,底排弹以及普通弹丸的运动通过FLUENT软件中网格的动态铺层得以实现。获得了清晰的外流场波系结构以及底排装置内腔的压力及温度的变化规律,计算结果表明,普通弹丸出膛口过程的近膛口流场波系结构与实验图片相符,证明了本文采用的数值方法的可行性,计算结果为底排装置内（燃烧室）固体燃料的非稳态燃烧过程以及固体燃料的力学性能的分析提供了丰富的数据参考,同时为膛口流场的研究提供了参考。     

Passive Acoustic Radar for Detecting Supersonic Cruise Missile

A Passive Acoustic Radar is presented as a necessary complement to electromagnetic wave radar, which will be expected to be an effective means for detecting cruise missiles. Acoustic characteristics of supersonic flying projectiles with diverse shapes are expounded via experiment. It is pointed out that simulation experiment could be implemented using bullet or shell instead of cruise missile. Based on theoretical analysis and experiment, the ““acoustic fingerprint““ character of cruise missile is illustrated to identify it in a strong noise environment. After establishing a locating mathematical model, the technique of acoustic embattling is utilized to resolve a problem of confirming the time of early-warning, considering the fact that velocity of sound is much slower than that of light. Thereby, a whole system of passive acoustic radar for detecting supersonic cruise missile is formed.     

Algorithm for Multi-laser-target Tracking Based on Clustering Fusion

Multi-laser-target tracking is an important subject in the field of signal processing of laser warners. A clustering method is applied to the measurement of laser warner, and the space-time fusion for measurements in the same cluster is accomplished. Real-time tracking of multi-laser-target and real-time picking of multi-laser-signal are introduced using data fusion of the measurements. A prototype device of the algorithm is built up. The results of experiments show that the algorithm is very effective.     

Super-resolution Restoration of Remote-sensing Images

A novel image restoration scheme, which is super-resolution image restoration algorithm Poisson-maximum-afterword-probability based on Markvo constraint （MPMAP） combined with evaluating image detail parameter D, has been proposed. The advantage of super-resolution algorithm MPMAP incorporated with parameter D lies in the fact that superresolution algorithm MPMAP model is discrete, which is in accordance with remote-sensing imaging model, and the algorithm MPMAP is proved applicable to linear and non-linear imaging models with a unique solution when noise is not severe. According to simulation experiments for practical images, super-resolution algorithm MPMAP can retain image details better than most of traditional restoration methods; at the same time, the proposed parameter D can help to identify real point spread function （PSF） value of degradation process. Processing result of practical remote-sensing images by MPMAP combined with parameter D are given, it illustrates that MPMAP restoration scheme combined PSF estimation has a better restoration result than that of Photoshop processing, based on the same original images. It is proved that the proposed scheme is helpful to offset the lack of resolution of the original remote-sensing images and has its extensive application foreground.     

Design and Simulation of TF and TA Controller for Missile

A nonlinear terrain following(TF) and terrain avoidance(TA) controller is proposed for missile control systems. Based on classical TF algorithm (adaptive angle method), a new method for TF controller is proposed by using angle of attack. A method of obtaining terrain outline data from digital elevation map (DEM) for TF control is discussed in order to save store space. A TA algorithm is proposed by using bank-to-turn technique. The block control model, which is suitable for backstepping design, is given for nonlinear model of missile. Making full use of the characteristics of the system and combining block control principle and backstepping technique, a robust controller design method is proposed. Uncertainties in every sub-block are allowed, and can be canceled by using the idea of nonlinear damping. It is proved that the state tracking errors are converged to a neighborhood of the origin exponentially. Finally, nonlinear six-degree-of-freedom simulation results for the missile model are presented to demonstrate the effectiveness of the proposed control law.     

Design and Analysis of Test Schemes of Static Postponing Time on Shrapnels Used to Riot Control

The test scheme of static postponing time given in our actual national military test standard on shrapnels used to control riot is a nine-point test scheme on the combined action of three kinds of temperatures and three kinds of pressures,the consumed ammunitions are more excessive. Statistic analysis and tentative checkout about a lot of test data are done,feasibility gists are put forward for optimizing of the test design scheme. The optimizing design and data analysis of test scheme of the item are done by managing uniformity design theory, two scientific and reasonable six-point test schemes are confirmed. The feasibility and reliability of the optimizing design schemes put forward above are proved ulteriorly by test validating. The gained schemes not only have good design uniformity and little ammunition wastage and meet the test demand, but also have better forecast ability for the result data of other points using the mathematic models from the actual test points.     

Influence of Installing Error on the Surface Shape Precision of the Axial Symmetry Aspheric Workpiece in Lapping

A method to calculate the surface shape error, which is caused by the installing error between the workpiece and the lapping tool in the process of form lapping, is proposed. The mathematical model which the installing translation error influences on the workpiece surface shape error is established. The changing rule of the error is simulated through the calculating example of the paraboloid workpiece. The results indicate that the surface shape error of the workpiece is increasing with the increase of the installing translation error, it is also increasing gradually along the center point of the curve surface to the edge, and the influence is severer to the curve surface with great curvature than that of the small curvature when the translation error is the same.     

Experimental Research on Output Performances of Giant Magnetostrictive Actuator

The paper introduces the performances of magnetostrictive actuators and its applications, discusses the design methods for the structure and internal magnetic circuit of a giant magnetostrictive actuator, and makes tests on the output displacement and force characteristics for an actuator using homemade magnetostrictive material. The experimental result shows that the actuator has satisfactory output precisions and ranges in transient and stable states, and can be used in lowfrequency vibration control system of precise equipment.     

Design and Implementation of Equipment Interactive Electronic Technical Manuals

Interactive electronic technical manuals （IETMs） can significantly improve the maintenance and logistics of modern weapon equipment. Main functions and development strategies of IETMs are discussed. As an example, the IETM development of a certain equipment is demonstrated.