Pyroelectric properties of BST/PLT composite thick films with addition of xPbO–(1 − x)B2O3 glass

The Ba_xSr_1−xTiO₃ (BST)/Pb_1−xLa_xTiO₃ (PLT) composite thick films (20 μm) with 12 mol% amount of xPbO–(1 − x)B₂O₃ glass additives (x = 0.2, 0.35, 0.5, 0.65 and 0.8) have been prepared by screen-printing the paste onto the alumina substrates with silver bottom electrode. X-ray diffraction (XRD), scanning electron microscope (SEM) and an impedance analyzer and an electrometer were used to analyze the phase structures, morphologies and dielectric and pyroelectric properties of the composite thick films, respectively. The wetting and infiltration of the liquid phase on the particles results in the densification of the composite thick films sintered at 750 °C. Nice porous structure formed in the composite thick films with xPbO–(1 − x)B₂O₃ glass as the PbO content (x) is 0.5 ≥ x ≥ 0.35, while dense structure formed in these thick films as the PbO content (x) is 0.8 ≥ x ≥ 0.65. The volatilization of the PbO in PLT and the interdiffusion between the PLT and the glass lead to the reduction of the c-axis of the PLT phase. The operating temperature range of our composite thick films is 0–200 °C. At room temperature (20 °C), the BST/PLT composite thick films with 0.35PbO–0.65B₂O₃ glass additives provided low heat capacity and good pyroelectric figure-of-merit because of their porous structure. The pyroelectric coefficient and figure-of-merit F_D are 364 μC/(m² K) and 14.3 μPa^−1/2, respectively. These good pyroelectric properties as well as being able to produce low-cost devices make this kind of thick films a promising candidate for high-performance pyroelectric applications.     

Fabrication and characterization of (1−x)SrBi2Ta2O9–xBi3TaTiO9 layered structure solid solution thin films for ferroelectric random access memory (FRAM) applications

We report on the properties of (1−x)SrBi₂Ta₂O₉–xBi₃TaTiO₉ solid solution thin films for ferroelectric non-volatile memory applications. The solid solution thin films fabricated by modified metalorganic solution deposition technique showed much improved properties compared to SrBi₂Ta₂O₉. A pyrochlore free crystalline phase was obtained at a low annealing temperature of 600°C and grain size was found to be considerably increased for the solid solution compositions. The film properties were found to be strongly dependent on the composition and annealing temperatures. The measured dielectric constant of the solid solution thin films was in the range 180–225 for films with 10–50% of Bi₃TaTiO₉ content in the solid solution. Ferroelectric properties of (1−x)SrBi₂Ta₂O₉–xBi₃TaTiO₉ thin films were significantly improved compared to SrBi₂Ta₂O₉. For example, the observed remanent polarization (2P_r) and coercive field (E_c) values for films with 0.7SrBi₂Ta₂O₉–0.3Bi₃TaTiO₉ composition, annealed at 650°C, were 12.4 μC/cm² and 80 kV/cm, respectively. The solid solution thin films showed less than 5% decay of the polarization charge after 10¹⁰ switching cycles and good memory retention characteristics after about 10⁶ s of memory retention. The improved microstructural and ferroelectric properties of (1−x)SrBi₂Ta₂O₉–xBi₃TaTiO₉ thin films compared to SrBi₂Ta₂O₉, especially at lower annealing temperatures, suggest their suitability for high density FRAM applications.     

Controllable formation of Er–Yb codoped Al2O3 films by the non-aqueous sol–gel method

1 mol%Er³⁺–10 mol%Yb³⁺ codoped Al₂O₃ thin films have been prepared on thermally oxidized SiO₂/Si(110) substrates by a dip-coating process in the non-aqueous sol–gel method from the hydrolysis of aluminum isopropoxide [Al(OC₃H₇)₃] under isopropanol environment. Addition of N,N-dimethylformamide (DMF) as a drying control chemical additive (DCCA) into the sol suppresses formation of the cracks in the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films when the rare-earth ion is doped with a high doping concentration. Homogeneous, smooth and crack-free Er³⁺–Yb³⁺ codoped Al₂O₃ thin films form at the conditions by a molar ratio of 1:1 for DMF:Al(OC₃H₇)₃. A strong photoluminescence spectrum with a broadband extending from 1.400 to 1.700 µm centered at 1.533 µm is obtained for the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films, which is unrelated to the addition of DMF. Controllable formation of the Er³⁺–Yb³⁺ codoped Al₂O₃ thin films may be explained by the fact that the DMF assisted the deprotonation process of Al–OH at the surfaces of gel particles, resulting in enhancement of the degree of polymerization of sols and improvement of the mechanical properties of gel thin films.     

Influence of rare-earth oxides on structure and crystallization properties of Bi2O3–B2O3 glass

Bi₂O₃·B₂O₃ glasses doped with rare-earth oxides (RE₂O₃) (RE³⁺ = La³⁺, Pr³⁺, Sm³⁺, Gd³⁺, Er³⁺ and Yb³⁺) were prepared by the melting–quenching method. The relationships between composition and properties were demonstrated by IR, DSC, XRD and SEM analysis. The results show that the network structure resembles that of undoped Bi₂O₃·B₂O₃ glass, composing of [BO₃], [BO₄] and [BiO₆] units. RE₂O₃ stabilizes the glass structure as a modifier. Transition temperature (T_g) increases linearly with cationic field strength (CFS) of RE³⁺. La₂O₃, Pr₂O₃, Sm₂O₃ and Gd₂O₃ are benefit to promote the formation of BiBO₃ crystal. When Er₂O₃ and Yb₂O₃ are introduced, respectively, the main crystal phase changes to Bi₆B₁₀O₂₄. Transparent surface crystallized samples are obtained by reheating at 460–540 °C for 5 h. In this case, needle like BiBO₃ crystal or rare-earth-doped BiBO₃ crystal (Pr_xBi_1−xBO₃ and Gd_xBi_1−xBO₃) are observed, which is promising for non-linear optical application.     

Structural and optical properties of (100 − x)(Li2B4O7) − x(SrO–Bi2O3–0.7Nb2O5–0.3V2O5) glasses and glass nanocrystal composites

Glasses of various compositions in the system (100 − x)(Li₂B₄O₇) − x(SrO–Bi₂O₃–0.7Nb₂O₅–0.3V₂O₅) (10  x  60, in molar ratio) were prepared by splat quenching technique. The glassy nature of the as-quenched samples was established by differential thermal analyses (DTA). The amorphous nature of the as-quenched glasses and crystallinity of glass nanocrystal composites were confirmed by X-ray powder diffraction studies. Glass composites comprising strontium bismuth niobate doped with vanadium (SrBi₂(Nb_0.7V_0.3)₂O_9−δ (SBVN)) nanocrystallites were obtained by controlled heat-treatment of the as-quenched glasses at 783 K for 6 h. High resolution transmission electron microscopy (HRTEM) of the glass nanocrystal composites (heat-treated at 783 K/6 h) confirm the presence of rod shaped crystallites of SBVN embedded in Li₂B₄O₇ glass matrix. The optical transmission spectra of these glasses and glass nanocrystal composites of various compositions were recorded in the wavelength range 190–900 nm. Various optical parameters such as optical band gap (E_opt), Urbach energy (ΔE), refractive index (n), optical dielectric constant and ratio of carrier concentration to the effective mass (N/m^*) were determined. The effects of composition of the glasses and glass nanocrystal composites on these parameters were studied.     

Microstructures, densification and mechanical properties of TiC–Al2O3–Al composite by field-activated combustion synthesis

Dense TiC–Al₂O₃–Al composite was prepared with Al, C and TiO₂ powders by means of electric field-activated combustion synthesis and infiltration of the molten metal (here Al) into the synthesized TiC–Al₂O₃ ceramic. An external electric field can effectively improve the adiabatic combustion temperature of the reactive system and overcome the thermodynamic limitation of reaction with x < 10 mol. Thereby, it can induce a self-sustaining combustion synthesis process. During the formation of Al₂O₃–TiC–Al composite, Al is molten first, and reacted with TiO₂ to form Al₂O₃, followed by the formation of TiC through the reaction between the displaced Ti and C. Highly dense TiC–Al₂O₃–Al with relative density of up to 92.5% was directly fabricated with the application of a 14 mol excess Al content and a 25 V cm⁻¹ field strength, in which TiC and Al₂O₃ particles possess fine-structured sizes of 0.2–1.0 μm, with uniform distribution in metal Al. The hardness, bending strength and fracture toughness of the synthesized TiC–Al₂O₃–Al composite are 56.5 GPa, 531 MPa and 10.96 MPa m^1/2, respectively.     

Influence of Mn doping on microstructure and DC-accelerated aging behaviors of ZnO–V2O5-based varistors

The microstructure, electrical properties, dielectric characteristics, and DC-accelerated aging behavior of the ZnO–V₂O₅–MnO₂ system sintered were investigated for MnO₂ content of 0.0–2.0 mol% by sintering at 900 °C. For all samples, the microstructure of the ZnO–V₂O₅–MnO₂ system consisted of mainly ZnO grain and secondary phase Zn₃(VO₄)₂. The incorporation of MnO₂ to the ZnO–V₂O₅ system was found to restrict the abnormal grain growth of ZnO. The nonlinear properties and stability against DC-accelerated aging stress improved with the increase of MnO₂ content. The ZnO–V₂O₅–MnO₂ system added with MnO₂ content of 2.0 mol% exhibited not only a high nonlinearity, in which the nonlinear coefficient is 27.2 and the leakage current density is 0.17 mA/cm², but also a good stability, in which %ΔE_1 mA = −0.6%, %Δ = −26.1%, and %Δtan δ = +22% for DC-accelerated aging stress of 0.85E_1 mA/85 °C/24 h.     

Optical absorption and emission properties of Er doped mixed alkali borosilicate glasses

This paper presents the optical absorption and luminescence properties of Er³⁺ doped mixed alkali borosilicate glasses: 59.5SiO₂ · 20B₂O₃ · xLi₂O · (20 − x)Na₂O · 0.5Er₂O₃ and 59.5SiO₂ · 20B₂O₃ · xLi₂O · (20 − x)K₂O · 0.5Er₂O₃, with x = 0, 4, 8, 12, 16 and 20 mol%. The variations of Judd–Ofelt intensity parameters (Ω₂, Ω₄, and Ω₆), hypersensitive transition intensities, total radiative transition probability (A_T), radiative lifetimes (τ_R), integrated absorption cross-sections (Σ) and stimulated emission cross-sections (σ_p) as a function of x are discussed in detail. The changes in Ω₂ and intensities of hypersensitive transitions are attributed to optical basicity changes in the host glass matrix, which leads to variations in the covalency of the Er–O bond. The luminescence properties are reported for certain transitions, and the emission cross-section is high at x = 8–12 in the case of lithium sodium glass, whereas in lithium potassium glass it is high at x = 8.     

Nanocrystallization of SrBi2Nb2O9 from glasses in the system Li2B4O7---SrO---Bi2O3---Nb2O5

Transparent glasses in the system (100−x)Li₂B₄O₇–x(SrO---Bi₂O₃---Nb₂O₅) (10≤x≤60) (in molar ratio) were fabricated by a conventional melt-quenching technique. Amorphous and glassy characteristics of the as-quenched samples were established via X-ray powder diffraction (XRD) and differential thermal analyses (DTA) respectively. Glass–ceramics embedded with strontium bismuth niobate, SrBi₂Nb₂O₉ (SBN) nanocrystals were produced by heat-treating the as-quenched glasses at temperatures higher than 500 °C. Perovskite SBN phase formation through an intermediate fluorite phase in the glass matrix was confirmed by XRD and transmission electron microscopy (TEM). Infrared and Raman spectroscopic studies corroborate the observation of fluorite phase formation. The dielectric constant (_r) and the loss factor (D) for the lithium borate, Li₂B₄O₇ (LBO) glass comprising randomly oriented SBN nanocrystals were determined and compared with those predicted based on the various dielectric mixture rule formalism. The dielectric constant was found to increase with increasing SBN content in LBO glass matrix.     

Phase relations, lattice thermal expansion in Ce1−xEuxO2−x/2 and Ce1−xSmxO2−x/2 systems and stabilization of cubic RE2O3 (RE: Eu, Sm)

The phase relations in CeO₂–Eu₂O₃ and CeO₂–Sm₂O₃ systems have been established under slow-cooled conditions from 1400 °C. The two-phase relations differ as the CeO₂–Eu₂O₃ system showed only two monophasic phase fields, namely F-type cubic and C-type cubic, whereas CeO₂–Sm₂O₃ system showed three phase fields namely F-type cubic, C-type cubic and a biphasic field comprising of C-type cubic and monoclinic phase. An interesting observation of this investigation is the stabilization of C-type rare-earth oxide after Ce⁴⁺ substitution, which is attributed to decrease in average cationic size on Ce⁴⁺ substitution at RE³⁺ site. The lattice thermal expansion behavior of F-type solid solution and C-type solid solution in CeO₂–Eu₂O₃ system was investigated by high-temperature XRD.     

Synthesis, structure refinement and characterization of tetrahydrated acid gadolinium diphosphate HGdP2O7·4H2O

Synthesis and single crystal structure are reported for a new gadolinium acid diphosphate tetrahydrate HGdP₂O₇·4H₂O. This salt crystallizes in the monoclinic system, space group P2₁/n, with the following unit-cell parameters: a = 6.6137(2) Å, b = 11.4954(4) Å, c = 11.377(4) Å, β = 87.53(2)° and Z = 4. Its crystal structure was refined to R = 0.0333 using 1783 reflections. The corresponding atomic arrangement can be described as an alternation of corrugated layers of monohydrogendiphosphate groups and GdO₈ polyhedra parallel to the () plane. The cohesion between the different diphosphoric groups is provided by strong hydrogen bonding involving the W4 water molecule.

IR and Raman spectra of HGdP₂O₇·4H₂O confirm the existence of the characteristic bands of diphosphate group in 980–700 cm⁻¹ area. The IR spectrum reveals also the characteristic bands of water molecules vibration (3600–3230 cm⁻¹) and acidic hydrogen ones (2340 cm⁻¹). TG and DTA investigations show that the dehydration of this salt occurs between 79 and 900 °C. It decomposes after dehydration into an amorphous phase. Gadolinium diphosphate Gd₄(P₂O₇)₃ was obtained by heating HGdP₂O₇·4H₂O in a static air furnace at 850 °C for 48 h.     

Er3+ 掺杂对Bi3Ti1.5W0.5O9-Bi4Ti3O12 共生无铅压电陶瓷性能的影响

用传统固相法制备了Bi_7-x Er _x Ti_4.5W_0.5O₂₁(BTW-BIT-xEr³⁺,x=0.05、0.10、0.15、0.25、0.35)共生铋层结构无铅压电陶瓷,用BTW-BIT-xEr³⁺的XRD和SEM表征其相结构和形貌,研究了Er³⁺掺杂对其上转换发光性能和电学性能的影响。结果表明：在这种陶瓷中生成了铋层状结构的单一晶相。在980 nm光波激发下所有组分的上转换荧光谱中都能清晰地观察到两个绿光和一个红光发射峰,峰的中心分别位于532 nm、548 nm和660 nm处。改变掺杂Er³⁺离子浓度可调节其强度比。根据BTW-BIT-0.15Er³⁺样品在532 nm和548 nm绿光的光强比拟合了290~440 K的温度灵敏度,结果表明440 K处的灵敏度最大为0.0023 K^-1。Er³⁺离子替代BTW-BIT-xEr³⁺伪钙钛矿层的Bi³⁺使氧空位浓度的降低,降低了高温介电损耗,提高了激活能和压电常数。BTW-BIT-0.15Er³⁺陶瓷的综合电学性能最优,分别为d₃₃=14 pC/N、T_c=697℃,tanδ=0.53%、Q_m=2055。这种陶瓷材料具有最优的发光性能和良好的热稳定性。     

Electrical properties of Ta2O5 thin films deposited on Cu

The electrical and dielectric properties of reactively sputtered Ta₂O₅ thin films with Cu as the top and bottom electrodes forming a simple metal insulator metal (MIM) structure, Cu/Ta₂O₅/Cu/n-Si, were studied. Ta₂O₅ films subjected to rapid thermal annealing (RTA) at 800°C for 30 s in N₂ ambient crystallized the film, decreased the leakage current density and resulted in reliable time-dependent dielectric breakdown characteristics. The conduction mechanism at low electric fields (<100 kV/cm) is due to Ohmic conduction; however, the Schottky mechanism becomes predominant at high fields (>100 kV/cm). Present studies demonstrate the use of Cu as a potential electrode material to replace the conventional precious metal electrodes for Ta₂O₅ storage capacitors.     

Preparation, patterning and luminescent properties of nanocrystalline Gd2O3:A (A=Eu, Dy, Sm, Er) phosphor films via Pechini sol–gel soft lithography

Nanocrystalline Gd₂O₃:A (A=Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺) phosphor films and their patterning were fabricated by a Pechini sol–gel process combined with a soft lithography. X-ray diffraction (XRD), atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical microscopy, UV/vis transmission and photoluminescence (PL) spectra as well as lifetimes were used to characterize the resulting films. The results of XRD indicated that the films began to crystallize at 500 °C and that the crystallinity increased with the elevation of annealing temperatures. Uniform and crack free non-patterned phosphor films were obtained by optimizing the composition of the coating sol, which mainly consisted of grains with an average size of 70 nm and a thickness of 550 nm. Using micro-molding in capillaries technique, we obtained homogeneous and defects-free patterned gel and crystalline phosphor films with different stripe widths (5, 10, 20 and 50 μm). Significant shrinkage (50%) was observed in the patterned films during the heat treatment process. The doped rare earth ions (A) showed their characteristic emission in crystalline Gd₂O₃ phosphor films due to an efficient energy transfer from Gd₂O₃ host to them. Both the lifetimes and PL intensity of the rare earth ions increased with increasing the annealing temperature from 500 to 900 °C, and the optimum concentrations for Eu³⁺, Dy³⁺, Sm³⁺, Er³⁺ were determined to be 5, 0.25, 1 and 1.5 mol% of Gd³⁺ in Gd₂O₃ films, respectively.     

Optical and electrical properties of p-type AgInSnxS2−x (x = 0–0.04) thin films prepared by spray pyrolysis

AgInSn_xS_2−x (x = 0–0.2) polycrystalline thin films were prepared by the spray pyrolysis technique. The samples were deposited on glass substrates at temperatures of 375 and 400 °C from alcoholic solutions comprising silver acetate, indium chloride, thiourea and tin chloride. All deposited films crystallized in the chalcopyrite structure of AgInS₂. A p-type conductivity was detected in the Sn-doped samples deposited at 375 °C, otherwise they are n-type. The optical properties of AgInSn_xS_2−x (x < 0.2) resemble those of chalcopyrite AgInS₂. Low-temperature PL measurements revealed that Sn occupying an S-site could be the responsible defect for the p-type conductivity observed in AgInSn_xS_2−x (x < 2) thin films.     

Low-temperature ionic conductivity of the solid solution in the system ZrO2–Y2O3–Yb2O3

Compositional dependence of ionic conductivity in the system ZrO₂–Y₂O₃–Yb₂O₃ was investigated in the temperature range 573–873 K using the complex impedance technique. It was shown that the conductivity decreases with increasing concentration of Yb₂O₃ in the system ZrO₂–Y₂O₃–Yb₂O₃. Analyzing the experimental data according to the classic Arrhenius equation showed that such an experimental phenomenon can be attributed to the tighter association between Yb³⁺ and oxygen vacancy, compared with that between Y³⁺ and oxygen vacancy, which hinders the migration of oxygen vacancy in the materials.     

Effect of heat treatment on photoluminescence behavior of BaMgAl10O17:Eu phosphors

The blue phosphor of BaMgAl₁₀O₁₇:Eu²⁺ (BAM) powders were prepared by solid-state reaction. The thermal degradation of BAM phosphor significantly reduces the intensity of the blue emission. BAM is reduced by an amount of 50% after heating at around 800 °C for 1 h. Photoluminescence (PL) excitation and emission spectra showed that the blue emission of 450 nm peak decreased with increasing annealing temperature. The ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ were observed at 590 and 615 nm emission lines over 1100 °C. Electron paramagnetic resonance (EPR) spectrum also detected two signals of Eu²⁺, corresponding to g=3.7156(9) for 88 mT, and g=2.9507(9) for 133 mT. X-ray absorption near edge structure (XANES) spectrum decreased the intensity of Eu²⁺ for 6977 eV with increasing annealing temperature, while high-energy peak of Eu³⁺ for 6984 eV was increased. The combined use of X-ray and neutron data by the Rietveld refinement appears to support that the secondary phase of EuMgAl₁₁O₁₉ magnetoplumbite structure in BAM may be formed by heat treatment.     

Highly stable persistent spectral hole burning in Eu ions doped oxy-fluoride glasses of 30CaF2–10Al2O3–60B2O3

High temperature persistent spectral hole burning up to room temperature has been observed in Eu³⁺ ions doped oxy-fluoride glasses with a composition of 30CaF₂–10Al₂O₃–60B₂O₃ (mol%) melted in a reducing atmosphere. The hole stability was studied through light-induced hole refilling and temperature cycling experiments. The burned holes survive thermal cycling to 300 K due to a high barrier height of 0.69 eV in the sample.     

Effects of growth conditions on the domain structure and dielectric properties of (1 − x)Pb(Sc1/2Nb1/2)O3–xPbTiO3 single crystals

The studies of the (1 − x)Pb(Sc_1/2Nb_1/2)O₃–xPbTiO₃ (PSN–PT) single crystals reveal that the chemical and physical properties of the materials are affected by the growth conditions. By the measurements of the dielectric constant as a function of temperature upon cooling, it is found that crystals grown from the same charged stoichiometric composition (x = 0.425), but under different flux environments (i.e. the composition of flux and the flux to PSN–PT ratios are varied), show anomalies (i.e. phase transitions) at different temperatures. This phenomenon is attributed to the complex local chemical structure of the PSN–PT solid solution single crystals with B-site random occupancy of three different cations (Sc³⁺, Nb⁵⁺ and Ti⁴⁺). The dielectric and domain structure of the PSN–PT crystals with composition near the morphotropic phase boundary (MPB) are investigated, showing much more complex situations compared with Pb(Sc_1/2Nb_1/2)O₃.     

Frequency dependent electrical conductivity and dielectric relaxation behavior in amorphous (90V2O5–10Bi2O3) oxide semiconductors doped with SrTiO3

We report on the experimental results of frequency dependent a.c. conductivity and dielectric constant of SrTiO₃ doped 90V₂O₅–10Bi₂O₃ semiconducting oxide glasses for wide ranges of frequency (500–10⁴ Hz) and temperature (80–400 K). These glasses show very large dielectric constants (10²–10⁴) compared with that of the pure base glass (≈10²) without SrTiO₃ and exhibit Debye-type dielectric relaxation behavior. The increase in dielectric constant is considered to be due to the formation of microcrystals of SrTiO₃ and TiO₂ in the glass matrix. These glasses are n-type semiconductors as observed from the measurements of the thermoelectric power. Unlike many vanadate glasses, Long's overlapping large polaron tunnelling (OLPT) model is found to be most appropriate for fitting the experimental conductivity data, while for the undoped V₂O₅–Bi₂O₃ glasses, correlated barrier hopping conduction mechanism is valid. This is due to the change of glass network structure caused by doping base glass with SrTiO₃. The power law behavior (σ_ac=A(ω^s) with s<1) is, however, followed by both the doped and undoped glassy systems. The model parameters calculated are reasonable and consistent with the change of concentrations (x).