Growth mechanisms of SnO(2)/Sn nanocables

SnO(2)/Sn nanocables have been grown on single-crystal Si substrates by metal catalyst assisted thermal evaporation of SnO powders. The morphologies and structures of the prepared nanocables were determined on the basis of field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), x-ray diffraction (XRD), Raman and photoluminescence (PL) spectra analyses. The microstructures and compositions of the top and bottom regions of the SnO(2)/Sn nanocables were identified by HRTEM in detail, which revealed some basic physical and chemical processes involved in the formation of the nanocables. A growth model was proposed to address the formation of SnO(2)/Sn nanocables on the basis of the vapour-liquid-solid (VLS) process.     

Graphene-SnO(2) composites for highly efficient photocatalytic degradation of methylene blue under sunlight

Graphene sheets decorated with SnO(2) nanoparticles (RGO-SnO(2)) were prepared via a redox reaction between graphene oxide (GO) and SnCl(2). Graphene oxide (GO) was reduced to graphene (RGO) and Sn(2+) was oxidized to SnO(2) during the redox reaction, leading to a homogeneous distribution of SnO(2) nanoparticles on RGO sheets. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images show uniform distribution of the nanoparticles on the RGO surface and high-resolution transmission electron microscopy (HRTEM) shows an average particle size of 3-5?nm. The RGO-SnO(2) composite showed an enhanced photocatalytic degradation activity for the organic dye methylene blue under sunlight compared to bare SnO(2) nanoparticles. This result leads us to believe that the RGO-SnO(2) composite could be used in catalytic photodegradation of other organic dyes.     

Interface Structure of Ag/SnO2 Nanocomposite Fabricated by Reactive Synthesis

The electric contact material of Ag/SnO₂ composite was achieved by reactive synthesis method. The com-positions and microstructure of Ag/SnO₂ composite were analyzed and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution electron microscopy (HRTEM). The structural feature was typical of the particle reinforced composites. The HRTEM images revealed that the observed Ag/SnO₂ interface was absence of the precipitated phase and the lattice contrast across the interface was clear and sharp. The average particle size of SnO₂ in composite was near 50 nm and it was well dispersed in spherical shape. The thermodynamic mechanism of reactive synthesis method was also discussed. The electronic density distribution analysis of the interface showed the charges of Ag atoms transmitted to O atoms and the conductivity of the material was also affected. No extra compounds expected such as Ag_xO_y formed at interface. The distribution of electrons was of inequality near the interface which explained why the mechanical property of the metal/ceramic materials was improved but the machining property declined.     

Synthesis and photocatalytic property of SnO2/TiO2 nanotubes composites

SnO2/TiO2 nanotubes composite photocatalysts with different SnO2 contents were successfully synthesized by means of a simple solvothermal process. The synthesized products were characterized physically by X-ray diffraction (XRD) and high-resolution transmission electron microscope (HRTEM). The composite photocatalysts can not only make the target pollutant, methylene blue (MB), adsorbed at a high concentration level around the surface of the composites but also decrease the recombination rate of electron-hole pairs so as to achieve good photocatalytic performance. The effect of SnO2 contents on the photocatalytic activities of the composites was also investigated. The results showed that the SnO2/TiO2 nanotubes composite photocatalyst with 5 wt.% SnO2 loading had the highest photocatalytic efficiency.     

水热合成法制备银-氧化锡复合粉体备

采用水热合成法,以亚硫酸钠为还原剂,用硝酸银、氨水和锡酸钠为原料制备银-氧化锡复合粉体,对制备的粉体进行X射线衍射、扫描电镜和能谱分析。结果表明:采用水热合成法可以制备出银-氧化锡颗粒,颗粒近似球形,粒径约为400 nm;该粉体由银和氧化锡两种物相组成,银的衍射峰非常明显,银元素和锡元素在粉体中均匀分布,可以推断银和氧化锡的分布是均匀的。     

SnO_2纳米空心球的合成及在锂离子电池正极方面的应用(英文)

采用锡盐溶液浸渍-煅烧锯末法,制备了SnO2纳米空心球.分别用X射线衍射(XRD)、透射电子显微镜(TEM)、高分辨透射电子显微镜(HRTEM)及恒流充放电技术对产品的结构形态和电化学性质进行了表征.结果表明,SnO2空心球的尺寸在50～120nm之间,壳层厚度约为5nm.在作为锂离子电池正极使用时,初始放电容量为607.7 mAh g-1.     

Microstructural and photoluminescence properties of tin dioxide modified by electron beam irradiation

A modified technique was developed by electron beam irradiation to prepare tin dioxide (SnO2) nanocrystals using the sol-gel method. SnO2 nanoparticles were radiated under a 1,400 KGy dose. The morphology and microstructure of the SnO2 nanocrystals were investigated by X-ray diffraction, high-resolution transmission electron microscopy (HRTEM), and Raman spectroscopy. The results indicate that the irradiated SnO2 nanoparticles have better crystallinity than unirradiated SnO2 nanoparticles, and the resulting nanocrystals have a tetragonal rutile crystalline structure. The HRTEM image proves that the average grain size is about 4 nm, and the clear lattice fringes indicate the improvement of SnO2 nanocrystals after irradiation. The Raman spectrum shows that there are new peaks at 535 cm(-1) and 691 cm(-1). The optical properties of SnO2 nanoparticles were characterized by ultraviolet-visible (UV-vis) and photoluminescence spectrophotometers. The band gap energy of the irradiated SnO2 was 3.29 eV smaller than that of the unirradiated SnO2 due to size effects and some defects of SnO2 nanocrystals. This work provides a novel approach for the improvement of SnO2 nanocrystals. The optical properties of the irradiated SnO2 nanomaterials are also expected to improve.     

Growth of tin dioxide nanobelts via Au-catalytic VLS process

Ultra-long (several millimeters) tin dioxide SnO2 nanobelts were prepared by chemical vapor deposition at 850 degrees C. The X-ray powder diffraction (XRD) indicated that the as-prepared sample is tetragonal phase SnO2; field emission scanning electron microscopy (FESEM) reveals the as-prepared SnO2 is uniform nanobelts; transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM) studies show the nanobelts is monocrystalline with width of hundreds of nanometers and growth along [101] crystal direction; X-ray energy-dispersive spectrometer (EDS) and photoluminescence (PL) spectrum were used to detail its composition and optical properties. The possible formation mechanism of these ultra-long nanobelts was also proposed on the basis of experiments.     

Rutile structured SnO2 nanowires synthesized with metal catalyst by thermal evaporation method

One-dimensional (1-D) nanostructures such as tubes, rods, wires, and belts have attracted considerable research activities owing to their strong application potential as components for nanosize electronic or optoelectronic devices utilizing superior optical and electrical properties. Characterizing the mechanical properties of nanostructure is of great importance for their applications in electronics, optoelectronics, sensors, actuators. Wide-bandgap SnO2 semiconducting material (Eg = 3.6 eV at room temperature) is one of the attractive candidates for optoelectronic devices operating at room temperature, gas sensors, and transparent conducting electrodes. The synthesis and gas sensing properties of semiconducting SnO2 nanomaterials have became one of important research issues since the first synthesis of SnO2 nanobelts. Considering the important application of SnO2 in sensors, these structures are not only ideal systems for fundamental understanding at the nanoscale level, but they also have potential applications as nanoscale sensors, resonator, and transducers. The structured SnO2 nanorods have been grown on silicon substrates with Au catalytic layer by thermal evporation process over 800 degrees C. The resulting sample is characterized and analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectroscopy (EDS). The morphology and structural properties of SnO2 nanowires were measured by scanning electron microscopy and high-resolution transmission electron microscopy. The mean diameter of the SnO2 nanorods grown on Au coated silicon (100) substrate is approximately 80 nm. In addition, X-ray diffraction measurements show that SnO2 nanorods have a rutile structure. The formation of SnO2 nanowires has been attributed to the vapor-liquid-solid (VLS) growth mechanisms depending on the processing conditions. We investigated the growth behavior of the SnO2 nanowires by variation of the growth conditions such as gas partial pressure and temperature.     

Facile fabrication and photocatalytic application of Ag nanoparticles-TiO2 nanofiber composites

A novel chemical method has been developed for the fabrication of Ag nanoparticles-coated TiO2 nanofiber composites. The method involves dispersion of TiO2 nanofibers in silver salt solution under ultrasonication, followed by addition of sodium citrate as a reducing agent. The Ag-coated TiO2 composites were characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and X-ray photoelectron microscopy (XPS). Furthermore, the photocatalytic performance was evaluated by the photocatalytic degradation of methyl orange under UV-light irradiation. It was found that the heterogeneous Ag-TiO2 composite showed a higher activity than the pure TiO2 nanofiber; the enhanced activity can be attributed to the excellent distribution and interaction of Ag nanoparticles with the TiO2 nanofiber support. A plausible mechanism for the formation of the Ag-coated TiO2 composite and reasons for the enhancement of photocatalytic activity are also discussed.     

多孔壳/磁核结构光催化剂的制备及表征

以聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物(P123)为结构导向剂,钛酸丁酯(TBOT)为钛源,SiO2/NiFe2O4为核,制备了具有多孔结构可磁分离的Ti O2/SiO2/NiFe2O4光催化剂。采用N2吸附-脱附、TEM、HRTEM、SEM、XRD和VSM等手段对样品进行分析表征。样品颗粒呈球形,分布均匀,平均粒径约为40nm,具备良好的磁分离性能。以硝基苯为模拟物测定其光催化活性,UV光照条件下,240min内硝基苯污染物降解完全,表明该光催化剂具有良好的光催化活性。     

TiO2 and SnO2 magnetic nanocomposites: influence of semiconductors and synthetic methods on photoactivity

A number of reports have been published on use of TiO2 in thin films, magnetic nanocomposites, or heterostructures such as TiO2/Ag and TiO2/SnO2, as catalysts for water decontamination. Hence, semiconductor materials such as SnO2, associated with TiO2 in such nanocomposites, should be assessed in depth for such applications, especially those involving complex structures, such as magnetic photocatalytic nanocomposites. The present study describes the synthesis, characterization and testing of the photocatalytic potential of TiO2 or SnO2 magnetic nanocomposites obtained by the polymeric precursor and the hydrolytic sol-gel methods. The nanocomposites TiO2/CoFe2O4 and SnO2/CoFe2O4 were synthesized from polymeric precursors while TiO2/Fe3O4 and SnO2/Fe3O4 were synthesized by the hydrolytic sol-gel method. The materials were characterized by X-ray diffraction (XRD), scanning electron microscopy (FEG/SEM) and transmission electron microscopy (TEM). The photocatalytic potentials were evaluated by rhodamine B dye photodegradation under UV-C radiation. Compared to SnO2, the nanocomposites with a coating of TiO2 were found to show better photocatalytic activity, but the SnO2 magnetic nanocomposites showed some photocatalytic activity, even though SnO2 is reported to be inactive for these purposes. As for the synthesis method, the nanocomposites obtained from polymeric precursors had smaller surface areas, but higher photocatalytic activity, than those obtained by the hydrolytic sol-gel method. This observation was attributed to the higher crystallinity and a more active surface resulting from calcination of the polymeric precursor material.     

Synthesis of nanostructured SnO2/C microfibers with improved performances as anode material for Li-ion batteries

Nanostructured SnO2/C microfibers were prepared by thermal decomposition of tin alginate fibers produced via wet-spinning technique. Results of X-ray diffraction and scanning electron microscopy show that the as-obtained SnO2/C microfibers consist of nano-sized SnO2 crystals with a mean diameter of 10-15 nm. Transmission electron microscopy visualization reveals that the composite fibers exhibit a porous structure consisting of both micropores and mesopores. Electrochemical evaluations of cyclic voltammetry and galvanostatic charge-discharge indicate that the SnO2/C microfibers possess a high capacity and good rate capability compared with commercial SnO2. The improved performances of SnO2/C fibers can be attributed to the nano-size of SnO2 particles dispersed in carbon matrix and the existing nanopores in the SnO2/C microfibers.     

Microstructure and photoluminescence studies of Sb-doped SnO2 zigzag nanobelts

SnO2 zigzag nanobelts were successfully Sb-doped by a simple vapor deposition method. Field emission scanning electron microscope (FESEM), high resolution transmission electron microscope (HRTEM), and X-ray diffraction (XRD) were used to characterize these Sb-doped nanobelts. The Sb doping in SnO2 nanobelts was confirmed by Energy Dispersive X-ray spectrum (EDS) and X-ray photoelectron spectroscopy (XPS). It is found that there is no apparent lattice distance difference between the pure SnO2 and the 0.705 at% Sb doped SnO2 nanobelts. A slight blue-shift in the photoluminescence (PL) spectra was shown with the increase of Sb doping concentration and a reasonable explanation was given.     

The structure and photoluminescence properties of Bi2O3-core/SnO2-shell nanowires

Bi2O3-core/SnO2-shell nanowires have been prepared by using a two-step process: thermal evaporation of Bi2O3 powders and sputtering of SnO2. The crystalline nature of the Bi2O3-core/SnO2-shell nanowires has been revealed by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED). TEM analysis and X-ray diffraction (XRD) results indicate that the Bi2O3-core/SnO2-shell nanowires consist of pure tetragonal alpha-Bi2O3-phase momocrystalline cores and tetragonal SnO2-phase polycrystalline shells. The photoluminescence (PL) measurements show that Bi2O3 nanowires have a broad emission band centered at around 560 nm in the yellow-green region. On the other hand, the Bi2O3-core/SnO2-shell coaxial nanowires with the sputtering times of 4 and 8 min have a blue emission band centered at around 450 nm. In contrast, those with a sputtering time of 10 min have a broad emission band centered at approximately 550 nm again. The origin of this yellow-green emission from the core/shell nanowires, however, quite differs from that from Bi2O3 nanowires, i.e., it is not from the Bi2O3 cores but from the SnO2 shells.     

Green synthesis and characteristic of core-shell structure silver/starch nanoparticles

An eco-friendly method was put forward to synthesize Ag nanoparticles (Ag NPs) by using biodegradable starch as a stabilizing agent. The silver ion from AgNO₃ was reduced by glucose in soluble starch solution. Morphological observation and characterization of Ag NPs were performed by using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD) and UV–vis absorption spectroscopy. HRTEM showed that Ag NPs were covered by starch layer to form spherical core-shell Ag/starch NPs with diameter ranging from 5 to 20 nm. XRD pattern confirmed the presence of Ag NPs with face-centered cubic (fcc) structure. All these results indicated that starch played an important role in stabilizing Ag NPs.     

Synthesis and electrocatalytic activity of multi-walled carbon nanotubes/Cu–Ag nanocomposites

Cu–Ag bimetallic nanoparticles with atomic ratio of 2.1:1 and diameter in the range of 15–30 nm were decorated on acid-treated multi-walled carbon nanotubes by a chemical reduction method, which was characterized by transmission electron microscope (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). The Cu–Ag/MWNTs nanocomposites were used to construct a modified electrode toward biosensing of H₂O₂ with a high sensitivity. The catalytic ability of MWNTs/Cu–Ag toward H₂O₂ was much better than that of MWNTs/Cu and MWNTs/Ag, which indicated that there is a cooperation effect between Cu and Ag.     

SnO2/还原氧化石墨烯/聚吡咯三元复合物的合成及其电化学电容性能

采用两步法制备出均匀分散的SnO2/还原氧化石墨烯(SnO2/RGO)二元复合物,再以二元复合物为模板,通过化学氧化法聚合吡咯(Py)单体,制备出SnO2/还原氧化石墨烯/聚吡咯(SnO2/RGO/PPy)三元复合材料。利用红外光谱(FTIR)、X射线衍射(XRD)和场发射扫描电镜(FESEM)对复合材料结构和形貌进行物性表征,利用循环伏安、恒电流充放电和交流阻抗对复合材料进行电化学性能研究,并讨论了不同含量的PPy对复合材料的结构和性能的影响。结果表明,所合成的三元复合材料的比电容随PPy含量的增加而增大,最大达到305.3F/g。三元复合物电容性能增强源于SnO2、RGO与PPy三者的相互协同作用,以及材料层状结构和大的比表面积。     

Enhanced photoelectrochemical activity of the TiO2 /ITO nanocomposites grown onto single-walled carbon nanotubes at a low temperature by nanocluster deposition

High-resolution transmission electron microscopy (HRTEM) is used to observe a TiO2/ITO-coated composite nanostructure grown onto single-walled carbon nanotubes (SWCNTs). The SWCNTs, indium tin oxide (ITO), and TiO2 mixtures of anatase (A) and rutile (R) are clearly distinguished in the HRTEM images. The thickness of the SWCNT was about 3 nm, and the TiO2 shell included different polycrystalline structures.     

超细Sn和SnO_2与碳复合的锂离子电池负极材料的制备及其电化学性能

采用溶液法以SnCl4.5H2O和葡萄糖为原料合成了颗粒尺寸为几个纳米的超细Sn及SnO2颗粒分布于无定形碳基体的复合材料,并在溶液过程中引入少量石墨。采用XRD、SEM和TEM等材料结构分析方法和恒电流充放电等电化学测试方法分析研究了前驱体的煅烧温度和石墨的引入对获得产物的结构及其作为锂离子电池负极材料的电化学性能的影响。研究结果表明,在500～700℃的煅烧温度下获得的Sn/C及含少量SnO2的Sn/SnO2/C复合材料,由于其中的Sn及SnO2的超细纳米尺寸及碳基体的缓冲有效减小了Sn在脱嵌锂过程中的应变和粉化,使材料具有良好的循环性能。石墨的引入有效提高了复合材料的容量和循环稳定性。经500℃煅烧的复合电极材料相对于其它材料具有更高的容量,其首次可逆容量达520mAh/g,经初始几个循环后,容量趋于稳定,经100次循环后,容量保持在350mAh/g。