Preparation and evaluation of charged solid lipid nanoparticles of tetrandrine for ocular drug delivery system: pharmacokinetics,cytotoxicity and cellular uptake studies

In this study, tetrandrine-loaded cationic solid lipid nanoparticles (TET-CNP) and solid lipid nanoparticles (TET-NP) were prepared by the emulsion evaporation-solidification at low temperature method. The particle size, zeta potential, and entrapment efficiency of TET-CNP and TET-NP were characterized. The results showed that the TET-CNP and TET-NP had average diameters of (15.29?±?1.34) nm and (18.77?±?1.23) nm with zeta potentials of (5.11?±?1.03) mV and (?8.71?±??1.23) mV and entrapment efficiencies of (94.1?±?2.37)% and (95.6?±?2.43)%, respectively. In vitro release studies indicated that the TET-CNP and TET-NP retained the drug entity better than tetrandrine ophthalmic solutions (TET-SOL). In the pharmacokinetics studies, the AUC values of TET-CNP and TET-NP were 1.96-fold and 2.00-fold higher than that of TET-SOL (?p?C_max values of TET-CNP and TET-NP were 2.45-fold and 2.53-fold higher than that of the TET-SOL (p?相似文献   

Biodegradable nanoparticles for improved kidney bioavailability of rhein: preparation,characterization, plasma,and kidney pharmacokinetics

The aim of this work is to develop biodegradable nanoparticles for improved kidney bioavailability of rhein (RH). RH-loaded nanoparticles were prepared using an emulsification solvent evaporation method and fully characterized by several techniques. Kidney pharmacokinetics was assessed by implanting a microdialysis probe in rat's kidney cortex. Blood samples were simultaneously collected (via femoral artery) for assessing plasma pharmacokinetics. Optimized nanoparticles were small, with a mean particle size of 132.6?±?5.95?nm, and homogeneously dispersed. The charge on the particles was nearly zero, the encapsulation efficiency was 62.71?±?3.02%, and the drug loading was 1.56?±?0.15%. In vitro release of RH from the nanoparticles showed an initial burst release followed by a sustained release. Plasma and kidney pharmacokinetics showed that encapsulation of RH into nanoparticles significantly increased its kidney bioavailability (AUC_kidney/AUC_plasma?=?0.586?±?0.072), clearly indicating that nanoparticles are a promising strategy for kidney drug delivery.     

Preparation,characterization and in vitro anticancer activity of paclitaxel conjugated magnetic nanoparticles

In this study, magnetic nanoparticles (MNPs) coated with L-aspartic acid (F-Asp NPs) were synthesized through a co-precipitation method and conjugated with paclitaxel (PTX) (F-Asp-PTX NPs) by esterification reaction between the carboxylic acid end groups on MNPs surface and the hydroxyl groups of the PTX and studied its cytotoxic effect in vitro. The successful conjugating of PTX onto the nanoparticles (NPs) was confirmed by X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM) and transmission electron microscopy (TEM) techniques. The results showed that the average size was 46.11?±?7.8 (mean?±?SD (n?=?25)) nm. The cytotoxicity of void of PTX and F-Asp-PTX NPs were compared to each other by MTT assay of the treated MCF-7 cell line. The F-Asp-PTX NPs showed pH-dependent drug release behavior. These studies specify that F-Asp-PTX NPs have a very remarkable anticancer effect, for breast cancer cell line.     

Co-administration with cell penetrating peptide enhances the oral bioavailability of docetaxel-loaded nanoparticles

This study proposes a novel docetaxel (DTX) cyclodextrin inclusion-loaded poly (lactic-co-glycolic acid) (PLGA) nanoparticles (D-CNPs) system with cell penetrating peptide (CPP), and evaluates its potential for oral administration of DTX. Heptaarginine (R₇) was used as the CPP. D-CNPs were prepared by the double-emulsification method. The mean particle size and zeta potential of the resulting D-CNPs were 198.7?±?12.56?nm and??27.25?±?4.62?mV, respectively, and their mean encapsulation efficiency and drug loading were 80.35?±?6.37% and 1.02?±?0.15%, respectively. The morphology of the D-CNPs was observed by scanning electron microscope (SEM) and transmission electron microscope (TEM). The release behavior of the D-CNPs was studied by using the dialysis method. The relative bioavailability of D-CNPs and D-CNPs co-administered with R₇ was enhanced about 5.57- and 9.43-fold, respectively, compared with the free DTX suspension. Furthermore, D-CNPs with R₇ displayed maximum cytotoxicity against MCF-7 cells in MTT assay. D-CNPs co-administered with R₇ showed markedly higher fluorescence intensity than D-CNPs without CPP. The results suggest that the D-CNPs co-administered with R₇ could be a potential delivery system with excellent therapeutic efficacy for targeting the drugs to cancer cells.     

A pH-independent instantaneous release of flurbiprofen: a study of the preparation of complexes,their characterization and in vitro/in vivo evaluation

In this study, furbiprofen/hydroxypropyl-β-cyclodextrin (HPβCD) inclusion complexes were prepared to improve the drug dissolution and facilitate its application in hydrophilic gels. Inclusion complexes were prepared using a supercritical fluid processing and a conventional optimized co-lypholization method was employed as a reference. The entrapment efficacy and drug loading of both methods were investigated. Evaluation of drug dissolution enhancement was conducted in deionized water as well as buffer solutions of different pH. Carbopol 940 gels of both flurbiprofen and flurbiprofen/HPβCD inclusion complexes, with or without penetration enhancers, were prepared and percutaneous permeation studies were performed using rat abdominal skin samples. Formation of flurbiprofen/HPβCD inclusion complexes was confirmed by Fourier transform-infrared spectroscopy, differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The results obtained showed that SCF processing produced a higher EE (81.91?±?1.54%) and DL (6.96?±?0.17%) compared with OCL with values of 69.11?±?2.23% and 4.00?±?1.01%, respectively. A marked instantaneous release of flurbiprofen/HPβCD inclusion complexes prepared by SCF processing (103.04?±?2.66% cumulative release within 5?min, a 10-fold increase in comparison with flurbiprofen alone) was observed. In addition, this improvement in dissolution was shown to be pH-independent (the percentage cumulative release at pH 1.2, 4.5, 6.8 and 7.4 at 5?min was 95.19?±?1.71, 101.75?±?1.44, 105.37?±?4.58 and 96.84?±?0.56, respectively). Percutaneous permeability of flurbiprofen-in-HPβCD-in-gels could be significantly accelerated by turpentine oil and was related to the water content in the system. An in vivo pharmacokinetic study showed a 2-fold increase in C_max and a shortened T_max as well as a comparable relative bioavailability when compared with the commercial flurbiprofen Cataplasms (Zepolas^®). With their superior dissolution, these flurbiprofen/HPβCD inclusion complexes prepared by SCF processing could provide improved applications for flurbiprofen.     

Cuboidal lipid polymer nanoparticles of rosuvastatin for oral delivery

The present work aimed to develop and characterize sustained release cuboidal lipid polymeric nanoparticles (LPN) of rosuvastatin calcium (ROS) by solvent emulsification-evaporation process. A three factor, two level (2³) full-factorial design was applied to study the effect of independent variables, i.e. amount of lipid, surfactant and polymer on dependent variables, i.e. percent entrapment efficiency and particle size. Optimized formulations were further studied for zeta potential, TEM, in vitro drug release and ex vivo intestinal permeability. Cuboidal nanoparticles exhibited average particle size 61.37?±?3.95?nm, entrapment efficiency 86.77?±?1.27% and zeta potential ?6.72?±?3.25?mV. Nanoparticles were lyophilized to improve physical stability and obtain free-flowing powder. Effect of type and concentration of cryoprotectant required to lyophilize nanoparticles was optimized using freeze-thaw cycles. Mannitol as cryoprotectant in concentration of 5-8% w/v was found to be optimal providing zeta potential ?20.4?±?4.63?mV. Lyophilized nanoparticles were characterized using FTIR, DSC, XRD and SEM. Absence of C=C and C–F aromatic stretch at 1548 and 1197?cm^?1, respectively, in LPN indicated coating of drug by lipid and polymer. In vitro diffusion of ROS using dialysis bag showed pH-independent sustained release of ROS from LPN in comparison to drug suspension. Intestinal permeability by non-everted gut sac model showed prolonged release of ROS from LPN owing to adhesion of polymer to mucus layer. In vivo absorption of ROS from LPN resulted in 3.95-fold increase in AUC_0–last and 7.87-fold increase in mean residence time compared to drug suspension. Furthermore modified tyloxapol-induced rat model demonstrated the potential of ROS-loaded LPN in reducing elevated lipid profile.     

Preparation and characterization of solid lipid nanoparticles of furosemide using quality by design

The present work aimed to synthesize solid lipid nanoparticles (SLNs) of Furosemide (FRSM). The parameter sensitivity analysis showed a significant effect of particle size and reference solubility on the AUC_0–∞, C_max and t_max. The FRSM-encapsulated SLNs were synthesized by the phase inversion temperature (PIT) technique using 3² factorial design. The optimal level of 221.28?mg of Compritol 888 ATO and 420?mg of Cremophor RH 40 showed a mean hydrodynamic diameter (MHD) of 25.54?±?0.57?nm, a polydispersity index (PdI) of 0.158?±?0.01, the % entrapment efficiency of 80.70?±?4.06%, percent dissolution efficiency of 71.72?±?1.52% and time elapsed for 50% drug release of 3.67?±?0.15?h. The PIT was determined using the turbidity method and the values ranged between 75°C and 73°C. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) images represent spherical to sub-spherical and smooth surface of SLN. The Fourier transform-infrared (FTIR), differential scanning calorimetry (DSC) and x-ray diffraction (XRD) depict the drug-excipient compatibility. Korsmeyer–Peppas was found to be the best fit release kinetics model (R²?=?0.973; K-value?=?29.96 and release exponent?=?0.40), predicting the Fickian diffusion. The results advocate that the optimized formulation (OF) could promote the controlled release, and improve the physicochemical stability of the formulation. Hence, SLN could be a potential drug carrier for the peroral delivery of FRSM.     

Acalypha indica–mediated green synthesis of ZnO nanostructures under differential thermal treatment: Effect on textile coating,hydrophobicity, UV resistance,and antibacterial activity

In this study, ZnO nanoparticles were green-synthesized from Acalypha indica leaf extract using zinc acetate as a precursor. The prepared ZnO nanoparticles were calcined at three different temperatures, namely 100, 300, and 600?°C. The structure/morphology of the green-synthesized ZnO nanoparticles was ascertained through X-ray diffraction, particle size analysis, scanning electron microscopy, transmission electron microscopy, and surface area analysis techniques. It was observed from the physico-chemical and biological characterization studies that ZnO nanoparticles calcined at high temperature (600?°C) exhibit high surface area (230?m²?g^?1) and small particle size (20?nm) with good antibacterial activity against Escherichia coli (22.89?±?0.06?mm) and Staphylococcus aureus (24.62?±?0.08?mm). In addition, cotton fabrics coated with these nanoparticles showed higher UV-protection (87.8?UPF), hydrophobicity (155°), and maximum zone of bacterial inhibition against E. coli and S. aureus (25.13?±?0.05 mm and 30.17?±?0.03?mm) than those coated with particles calcined at 100?°C and 300?°C. High temperature calcination has a vital role in the crystallization of the particles towards nanoscale with increased resistivity to UV exposure, washing treatments, and microbial infection in fabrics. Thus, the cost-effective ZnO nanoparticles obtained through green synthesis method proves their potential applications in the field of biomedical, textile, and cosmetic applications.     

Bortezomib-loaded solid lipid nanoparticles: preparation,characterization, and intestinal permeability investigation

Bortezomib (BTZ), a proteasome inhibitor, is clinically used for the treatment of multiple myeloma and mantle cell lymphoma via intravenous or subcutaneous administration. Since BTZ has limited intestinal permeability, in this study, solid lipid nanoparticles (SLNs) were selected as lipid carrier to improve the intestinal permeability of BTZ. The nanoparticles were prepared by hot oil-in-water emulsification method and characterized for physicochemical properties. Moreover, in situ single-pass intestinal perfusion technique was used for intestinal permeability studies. Mean particle size of the BTZ-loaded solid lipid nanoparticles (BTZ-SLNs) was 94.6?±?0.66?nm with a negative surface charge of –18?±?11?mV. The entrapment efficiency of the BTZ-SLNs was 68.3?±?3.7% with a drug loading value of 0.8?±?0.05%. Cumulative drug release (%) over 48?h, indicated a slow release pattern for nanoparticles. Moreover, the SEM image showed a spherical shape and uniform size distribution for nanoparticles. Also, FTIR analysis indicated that BTZ was successfully loaded in the SLNs. The results of the intestinal perfusion studies revealed an improved effective permeability for BTZ-SLNs with a P_eff value of about threefold higher than plain BTZ solution.     

The impact of preparation parameters on typical attributes of chitosan-heparin nanohydrogels: particle size,loading efficiency,and drug release

Today, developing an optimized nanoparticle (NP) preparation procedure is of paramount importance in all nanoparticulate drug delivery researches, leading to expanding more operative and clinically validated nanomedicines. In this study, a one-at-a-time experimental approach was used for evaluating the effect of various preparation factors on size, loading, and drug release of hydrogel NPs prepared with ionotropic gelation between heparin and chitosan. The size, loading efficiency (LE) and drug release profile of the NPs were evaluated when the chitosan molecular weight, chitosan concentration, heparin addition time to chitosan solution, heparin concentration, pH value of chitosan solution, temperature, and mixing rate were changed separately while other factors were in optimum condition. The results displayed that size and LE are highly influenced by chitosan concentration, getting an optimum of 63?±?0.57 and 75.19?±?2.65, respectively, when chitosan concentration was 0.75?mg/ml. Besides, heparin addition time of 3?min leaded to 74.1?±?0.79 % LE with no sensible effect on size and release profile. In addition, pH 5.5 showed a minimum size of 63?±?1.87, maximum LE of 73.81?±?3.13 and the slowest drug release with 63.71?±?3.84 % during one week. Although LE was not affected by temperature, size and release reduced to 63?±?0 and 74.21?±?1.99% when temperature increased from 25°C to 55°C. Also, continuous increase of mixer rate from 500 to 3500?rpm resulted in constant enhancement of LE from 58.3?±?3.6 to 74.4?±?2.59 as well as remarkable decrease in size from 148?±?4.88 to 63?±?2.64.     

Preparation and evaluation of Baicalin-loaded cationic solid lipid nanoparticles conjugated with OX26 for improved delivery across the BBB

Purpose: A novel brain targeting drug delivery system based on OX26 antibody conjugation on PEGylated cationic solid lipid nanoparticles (OX26-PEG-CSLN) was prepared.

Methods: The Baicalin-loaded PEGylated cationic solid lipid nanoparticles modified by OX26 antibody (OX26-PEG-CSLN) were prepared by emulsion evaporation–solidification at low temperature method. The immune-gold labeled OX26-PEG-CSLN was visualized by transmission electron microscopy. The mean diameter and zeta potential of OX26-PEG-CSLN, PEG-CSLN and CSLN were determined using a Zetasizer. The entrapment efficiency of OX26-PEG-CSLN, PEG-CSLN and CSLN was determined by ultrafiltration centrifugation method. And the solid-state characterization of OX26-PEG-CSLN and CSLN were analyzed by X-ray. Pharmacokinetics studies were conducted by in vivo microdialysis in rat cerebrospinal fluid.

Results: The results showed that the OX26-PEG-CSLN, PEG-CSLN and CSLN had average diameters of 47.68?±?1.65, 27.20?±?1.70 and 33.89?±?5.74?nm, Zeta potentials of ?0.533?±?0.115?mV, 11.200?±?0.500?mV and 11.080?±?1.170?mV and entrapment efficiencies of 83.03?±?0.01%, 92.90?±?3.50% and 97.83?±?0.19%, respectively. In the pharmacokinetics studies, the AUC value of OX26-PEG-CSLN was11.08-fold higher than that of the Baicalin solution (SOL) (p?p?>?0.05); the C_max value of OX26-PEG-CSLN was 7.88-fold higher than that of SOL (p?p?Conclusion: These results demonstrated OX26-PEG-CSLN could be a promising carrier to deliver drugs across the BBB for the treatment of brain diseases.     

Sigma-2 receptor ligand anchored telmisartan loaded nanostructured lipid particles augmented drug delivery,cytotoxicity, apoptosis and cellular uptake in prostate cancer cells

Recently, the anticancer activity of telmisartan (TEL) has been discovered against prostate cancer. Nevertheless, despite favorable therapeutic profile, poor aqueous solubility and suboptimal oral bioavailability hamper the anticancer efficacy of TEL. Therefore, in this investigation, sigma-2 receptor ligand, 3-(4-cyclohexylpiperazine-1-yl) propyl amine (CPPA) anchored nanostructured lipid particles of telmisartan (CPPA-TEL-NLPs) were engineered using stearic acid for targeting prostate cancer, PC-3 cells. The mean particle size of TEL-NLPs was measured to be 25.4?±?3.2?nm, significantly (p?p?p?In vitro drug release study was conducted to determine the drug delivery potential of tailored nanoparticles. TEL-NLPs released 93.36% of drug significantly (p?50 of CPPA-TEL-NLPs was measured to be 20.3?µM significantly (p?50 of 41.3?µM, significantly (p?>?0.05) not different from 43.4?µM, exhibited by TEL-NLPs in PNT-2 cells. We elucidated that CPPA-TEL-NLPs entered the PC-3 cells via receptor mediated endocytosis pathway and thus exhibited superior cytotoxicity, apoptosis and greater extent of cellular uptake in PC-3 cells. In conclusion, CPPA-TEL-NLPs may be a promising nanomedicine and warrant further in vivo investigations for gaining clinical success.     

Chlorogenic acid stabilized nanostructured lipid carriers (NLC) of atorvastatin: formulation,design and in vivo evaluation

The present work was aimed at developing an optimized oral nanostructured lipid carrier (NLC) formulation of poorly soluble atorvastatin Ca (AT Ca) and assessing its in vitro release, oral bioavailability and pharmacodynamic activity. In this study, chlorogenic acid, a novel excipient having synergistic cholesterol lowering activity was utilized and explored in NLC formulation development. The drug-loaded NLC formulations were prepared using a high pressure homogenization technique and optimized by the Box-Behnken statistical design using the Design-Expert software. The optimized NLC formulation was composed of oleic acid and stearic acid as lipid phase (0.9% w/v), poloxamer 188 as surfactant (1% w/v) and chlorogenic acid (0.05% w/v). The mean particle size, polydispersity index (PDI) and % drug entrapment efficiency of optimized NLC were 203.56?±?8.57?nm, 0.27?±?0.028 and 83.66?±?5.69, respectively. In vitro release studies showed that the release of drug from optimized NLC formulations were markedly enhanced as compared to solid lipid nanoparticles (SLN) and drug suspension. The plasma concentration time profile of AT Ca in rats showed 3.08- and 4.89-fold increase in relative bioavailability of developed NLC with respect to marketed preparation (ATORVA® tablet) and drug suspension, respectively. Pharmacodynamic study suggested highly significant (**p?0.01) reduction in the cholesterol and triglyceride values by NLC in comparison with ATORVA® tablet. Therefore, the results of in vivo studies demonstrated promising prospects for successful oral delivery of AT Ca by means of its chlorogenic acid integrated NLC.     

Design,characterization, and evaluation of intranasal delivery of ropinirole-loaded mucoadhesive nanoparticles for brain targeting

Context: Parkinson disease (PD) is a common, progressive neurodegenerative disorder, characterized by marked depletion of striatal dopamine and degeneration of dopaminergic neurons in the substantia nigra.

Objective: The purpose of the present study was to investigate the possibility of targeting an anti-Parkinson’s drug ropinirole (RH) to the brain using polymeric nanoparticles.

Materials and methods: Ropinirole hydrochloride (RH)-loaded chitosan nanoparticles (CSNPs) were prepared by an ionic gelation method. The RH-CSNPs were characterized for particle size, polydispersity index (PDI), zeta potential, loading capacity, entrapment efficiency in vitro release study, and in vivo distribution after intranasal administration.

Results and discussion: The RH-CSNPs showed sustained release profiles for up to 18?h. The RH concentrations (% Radioactivity/g) in the brain following intranasal administration (i.n.) of RH-CSNPs were found to be significantly higher at all the time points compared with RH solution. The concentration of RH was highest in the liver (7.210?±?0.52), followed by kidneys (6.862?±?0.62), intestine (4.862?±?0.45), and lungs (4.640?±?0.92) in rats following i.n. administration of RH-CSNPs. Gamma scintigraphy imaging in rats was performed to ascertain the localization of drug in the brain following intranasal administration of formulations. The brain/blood ratios obtained (0.251?±?0.09 and 0.386?±?0.57 of RH (i.n.) and RH-CSNPs (i.n.), respectively) at 0.5?h are indicative of direct nose to brain transport, bypassing the blood–brain barrier (BBB).

Conclusion: The novel formulation showed the superiority of nose to brain delivery of RH using mucoadhesive nanoparticles compared with other delivery routes reported earlier.     

Preparation,characterization, and pharmacokinetics study of a novel genistein-loaded mixed micelles system

Genistein (GEN), is a natural dietary isoflavone, has been reported to show anticancer activities. However, its poor aqueous solubility and oral bioavailability limit its clinical application. We designed a novel genistein-loaded mixed micelles (GEN-M) system composed of Soluplus^® and Vitamin E d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS) were prepared by organic solvent evaporation aimed to overcome the challenges of GEN’s poor solubility and then further improve its oral bioavailability. The optimized, spherical-shaped GEN-M was obtained at a ratio of 10:1 (Soluplus^®:TPGS). The mean particle size of GEN-M was 184.7?±?2.8?nm, with a narrow polydispersity index (PDI) of 0.162?±?0.002. The zeta potential value of GEN-M was ?2.92?±?0.01?mV. The micelles solutions was transparent with blue opalescence has high the entrapment efficiency (EE) and drug loading (DL) of 97.12?±?2.11 and 3.87?±?1.26%, respectively. GEN-M was demonstrated a sustained release behavior when formed micelles shown in drug release in vitro. The solubility of GEN in water increased to 1.53?±?0.04?mg/mL after encapsulation. The permeability of GEN across a Caco-2 cell monolayer was enhanced, and the pharmacokinetics study of GEN-M showed a 2.42-fold increase in relative oral bioavailability compared with free GEN. Based on these findings, we conclude that this novel nanomicelles drug delivery system could be leveraged to deliver GEN and other hydrophobic drugs.     

Microspheres for the oral delivery of insulin: preparation,evaluation and hypoglycaemic effect in streptozotocin-induced diabetic rats

Insulin-loaded microspheres were prepared by alternating deposition film layers that were composed of insulin and poly(vinyl sulfate) potassium on the surface of poly(lactic acid) (PLA) microspheres. The preparation of the insulin-loaded microspheres was optimized by an orthogonal test design, and the relationship between drug loading (DL) and film layers was studied. The particle size, DL and encapsulation efficiency of the obtained insulin-loaded microspheres with 10 films were 5.25?±?0.15?µm, 111.33?±?1.15?mg/g and 33.7?±?0.19%, respectively. Following this, the physical characteristics of the insulin-loaded microspheres were investigated. The results from scanning electron microscopy and a laser particle size analyzer (LPSA) indicated the spherical morphology, rough surface and increasing particle sizes of the insulin-loaded microspheres, which were compared to those of PLA microspheres. An in vitro release study showed that the insulin-loaded microspheres were stable in HCl solution (pH 1.0) and released insulin slowly in phosphate-buffered solution (pH 6.8). Finally, the drug efficacy of the prepared insulin-loaded microspheres via oral administration was evaluated in rats with diabetes induced by streptozotocin, and an obvious dose-dependent hypoglycemic effect was observed. This preliminary data could illustrate the prospect of using microspheres for the oral delivery of insulin.     

Preparation and optimization of doxorubicin-loaded albumin nanoparticles using response surface methodology

Background: The objective of this work was to optimize the preparation of doxorubicin-loaded albumin nanoparticles (Dox-A-Nps) through desolvation procedures using response surface methodology (RSM). A central composite design (CCD) for four factors at five levels was used in this study.

Method: Albumin nanoparticles were prepared through a desolvation method and were optimized in the aid of CCD. Albumin concentration, amount of doxorubicin, pH values, and percentage of glutaraldehyde were selected as independent variables, particle size, zeta potential, drug loading, encapsulation efficiency, and nanoparticles yield were chosen as response variables. RSM and multiple response optimizations utilizing a quadratic polynomial equation were used to obtain an optimal formulation.

Results: The optimal formulation for Dox-A-Nps was composed of albumin concentration of 17?mg/ml, amount of doxorubicin of 2?mg/ml, pH value is 9 and percentage of glutaraldehyde of 125% of the theoretic amount, under which the optimized conditions gave rise to the actual average value of mean particle size (151?±?0.43?nm), zeta potential (?18.8?±?0.21 mV), drug loading efficiency (21.4?±?0.70%), drug entrapment efficiency (76.9?±?0.21%) and nanoparticles yield (82.0?±?0.34%). The storage stability experiments proved that Dox-A-Nps stable in 4°C over the period of 4 months. The in vitro experiments showed a burst release at the initial stage and followed by a prolonged release of Dox from albumin nanoparticles up to 60?h.

Conclusions: This study showed that the RSM-CCD method could efficiently be applied for the modeling of nanoparticles, which laid the foundation of the further research of immuno nanoparticles.     

Capecitabine lipid nanoparticles for anti-colon cancer activity in 1,2-dimethylhydrazine-induced colon cancer: preparation,cytotoxic, pharmacokinetic,and pathological evaluation

The cornerstone of this investigation is to determine the pharmacokinetic and histopathological behavior of solid lipid nanoparticles of capecitabine (CB-SLNs) in 1,2-dimethylhydrazine (DMH) induced colon cancer. The nanoparticles were prepared by microemulsion method. CB-SLNs were characterized for an optimal system. The cytotoxicity of CB-SLNs was evaluated by using MTT assay method. Further, pharmacokinetic and histopathological behavior of SLNs were studied in DMH induced colon cancer rats. The optimized nanoparticles have the particle size, zeta potential, and entrapment efficiency of 145.6?±?3.6?nm, ?26.9?±?2.7?mV, and 88.33?±?3.74%, respectively. Particles of CB were nearly spherical in shape and converted to amorphous form revealed by SEM and DSC, XRD studies. The nanoparticles showed dose-dependent cytotoxicity activity from 10 to 125?µg/mL compared with suspension. Pharmacokinetic studies revealed that 2.7-folds enhancement in the oral bioavailability and in aberrant crypt foci number, apoptotic index comparison with suspension formulation.     

Topical delivery of tetrahydrocurcumin lipid nanoparticles effectively inhibits skin inflammation: in vitro and in vivo study

Tetrahydrocurcumin (THC) also referred to as ‘white curcumin’, is a stable colorless hydrogenated product of curcumin with superior antioxidant and anti-inflammatory properties. The present study is an attempt to elevate the topical bioavailability of THC, post-incorporation into a nano-carrier system with its final dosage as a hydrogel. Lipid nanoparticles of THC (THC-SLNs) prepared by microemulsification technique were ellipsoidal in shape (revealed in transmission electron microscopy) with a mean particle size of 96.6?nm and zeta potential of ?22?mV. Total drug content and entrapment efficiency of THC-SLNs was 94.51%?±?2.15% and 69.56%?±?1.35%, respectively. Differential scanning calorimetry and X-ray diffraction studies confirmed the formation of THC-SLNs. In vitro drug release studies showed the drug release from THC-SLNs gel to follow Higuchi’s equation revealing a Fickian diffusion. Ex vivo permeation studies indicated a 17 times (approximately) higher skin permeation of THC-SLNs gel as compared with the free THC gel. Skin irritation, occlusion, and stability studies indicated the formulation to be nonirritating, and stable with a desired occlusivity. Pharmacodynamic evaluation in an excision wound mice model clearly revealed the enhanced anti-inflammatory activity of THC-SLNs gel and was further confirmed using biochemical and histopathological studies. It is noteworthy to report here that THC-SLNs gel showed significantly better (p?≤?0.001) activity than free THC in gel. As inflammation is innate to all the skin disorders, the developed product opens up new therapeutic avenues for several skin diseases. To the best of our knowledge, this is the first paper elaborating the therapeutic usefulness of white curcumin-loaded lipidic nanoparticles for skin inflammation.     

Formulation design and optimization of novel soft glycerosomes for enhanced topical delivery of celecoxib and cupferron by Box–Behnken statistical design

Background: The present study describes glycerosomes (vesicles composed of phospholipids, glycerol and water) as a novel drug delivery system for topical application of celecoxib (CLX) and cupferron (CUP) compound.

Aim: The goal of this research was to design topical soft innovative vesicles loaded with CLX or CUP for enhancing the efficacy and avoiding systemic toxicity of CLX and CUP.

Methods: CLX and CUP loaded glycerosomes were prepared by hydrating phospholipid-cholesterol films with glycerol aqueous solutions (20–40%, v/v). Box–Behnken design, using Design-Expert® software, was the optimum choice to statistically optimize formulation variables. Three independent variables were evaluated: phospholipid concentration (X₁), glycerol percent (X₂) and tween 80 concentration (X₃). The glycerosomes particle size (Y₁), encapsulation efficiency percent (Y₂: EE %) and drug release (Y₃) were selected as dependent variables. The anti-inflammatory effect of CLX and CUP glycerosomal gel was evaluated by carrageenan-induced rat paw edema method followed by histopathological studies.

Results: The optimized formulations (CLX2* and CUP1*) showed spherical morphology under transmission electron microscopy, optimum particle size of 195.4?±?3.67?nm, 301.2?±?1.75?nm, high EE of 89.66?±?1.73%, 93.56?±?2.87%, high drug release of 47.08?±?3.37%, 37.60?±?1.89% and high cumulative amount of drug permeated in 8?h of 900.18?±?50.24, 527.99?±?34.90?µg.cm^?2 through hairless rat skin, respectively. They also achieved significant remarkable paw edema inhibition in comparison with the control group (p? Conclusion: Finally, the administration of CLX2* and CUP1* loaded glycerosomal gel onto the skin resulted in marked reduction of edema, congestive capillary and inflammatory cells and this approach may be of value in the treatment of different inflammatory disorders.